Eaton ESWV10401 Handbuch

Effective May 2011

ESWV10401

ESWV10801

Instructional Leaet

IL00412021E

1x4 and 1x8 passive coaxial

distribution module

Product description

The Eaton ESWV10401 and ESWV10801 coaxial

distribution module provides distribution of one

incoming coaxial signal (TV, CATV, modulated

signals) to four or eight locations with four pass-

through connections for SATV. Please be sure

to review this installation guide carefully prior

to installation.

Features

Video distribution

• Distributes one incoming video signal

to four or eight locations

• Four pass-through connections for satellite

TV distribution

• Bi-directional for digital and networking signals

Caution

installation preCautions: never install or

work with video wiring during a lightning

storm. never install telephone jaCks in

wet loCation unless the jaCk is speCifiCally

designed for use in wet loCations. have the

eleCtriCian ConneCt the aC outlet to branCh

CirCuit power. the ConneCtion should be

in aCCordanCe with the national eleCtriCal

Code,TartiCles 110, 250, and 300. never touCh

uninsulated telephone wires or terminals

unless the telephone line has been

disConneCted at the network interfaCe

or demarCation point.

Eaton Corporation

Electrical Sector

1111 Superior Ave.

Cleveland, OH 44114

United States

877-ETN-CARE (877-386-2273)

Eaton.com

Printed in USA

Publication No. IL00412021E / Z10942

May 2011

Eaton is a registered trademark

of Eaton Corporation.

All other trademarks are property

of their respective owners.

Instructional Leaet IL00412021E

Effective May 2011

1x4 and 1x8 passive coaxial

distribution module

Connecting incoming television or cable TV

to the coaxial distribution module

1. Run an RG6 coaxial cable from the video source (antenna or

cable TV D-marc) location to the ESWV10401 or ESWV10801.

2. Connect the RG6 cable to the RF input located on the

rear of the coaxial distribution module (see Figure 1).

3. Connect the RG6 coaxial cable running to the various

room locations to the coaxial connectors on the front

of the module marked Outputs (see Figure 2).

Connecting to satellite signals

1. Run two, three, or four RG6 cables from the satellite dish

to the ESWV10401 or ESWV10801 modules and connect the

cables to the SATV connectors on the rear (see Figure 1).

2. Connect the RG6 cables running to the various satellite

receiver (room) locations to the inputs on the front of the

ESWV10401 or ESWV10801 module (see Figure 2).

Figure 1.

Figure 2.

Input SATV connections

Four pass-through

connections

for SATV

Outputs to

room locations

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Eaton Steuereinheit Handbücher

Eaton

Eaton MFD-CP8 Series Handbuch

Eaton

Eaton SystemStak DGM-5-30 Series Bedienungsanleitung

Eaton

Eaton DXC-EXT-LOCSIM Handbuch

Eaton

Eaton Char-Lynn 5 Series Bedienungsanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

Eaton

Eaton NRX Digitrip 1150 Handbuch

Eaton

Eaton PKE-SWD-32 Handbuch

Eaton

Eaton Series NRX Bedienungsanleitung

Eaton

Eaton COOPER POWER SERIES Fehlerbehebungshandbuch

Eaton

Eaton MN024002EN Bedienungsanleitung

Eaton

Eaton mMINT Kurzanleitung

Eaton

Eaton OPTC4 LonWorks Bedienungsanleitung

Eaton

Eaton Crouse-hinds series Bedienungsanleitung

Eaton

Eaton VICKERS DG3V-10 Series Bedienungsanleitung

Eaton

Eaton Vickers FCGT-02-A-11 Series Bedienungsanleitung

Eaton

Eaton SL7 Series Handbuch

Eaton

Eaton ELC-COENETM Bedienungsanleitung

Eaton

Eaton Vickers CG-03 Series Bedienungsanleitung

Eaton

Eaton ePDU G3 Datenblatt

Eaton

Eaton Eaton 5PX Montageanleitung

Eaton

Eaton Crouse-hinds series Bedienungsanleitung

Eaton

Eaton DXE-EXT-SET Handbuch

Eaton

Eaton ELC-MC01 Bedienungsanleitung

Eaton

Eaton EASY205-ASI Handbuch

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung

Flyron

Flyron FN-BC04 Bedienungsanleitung