Eaton Power Xpert PXGX Programmierhandbuch

p/n: 164950240

Revision 2

Power Xpert Gateway

PXGX UPS

EMP Upstream Downstream

100100 Act Act Setup

Restart

Status

DHCP

Ident

Power

Package Contents

lPower Xpert Gateway Minislot (PXGX) UPS Card

lUSB Cable

lQuick Start Instructions

Quick Start Instructions

Eaton®® Power Xpert®® Gateway (PXGX) UPS Card

Eaton reserves the right to change specifications without prior notice Eaton®, Power Xpert®, and PredictPulseTM are registered

trademarks of Eaton or its subsidiaries and affiliates Google Chrome is a trademark of Google Inc Linux is a registered trademark of

Linus Torvalds Microsoft, Internet Explorer, and Windows are registered trademarks of Microsoft Corporation in the United States and in

other countries Mozilla and Firefox are registered trademarks of the Mozilla Foundation other trademarks are property of their respective

companies All other trademarks are property of their respective companies All other trademarks are property of their respective

companies

express written approval of Eaton

Help Desk Numbers

United States 1-800-356-5737 or 1-800-843-9433

Canada 1-800-461-9166 ext 260

All Other Countries Call your local service representative

Web Site www.eaton.com/pxgx

NOTE On the Web site opening page, click Support and select the Customer Service

link for more information.

Eaton Power Xpert® Gateway PXGX UPS Card Quick Start Instructions 164950240—Rev 2 iii

TTaabbllee ooff CCoonntteennttss

11 IInnssttaallllaattiioonn CChheecckklliisstt ..........................................................................................................................................................................................................................................................................11

22 IInnssttaallll tthhee CCaarrdd............................................................................................................................................................................................................................................................................................33

33 CCoonnnneecctt tthhee CCaarrdd ttoo tthhee CCoommppuutteerr ....................................................................................................................................................................................................................................55

44 IInnssttaallll tthhee DDrriivveerr SSooffttwwaarree ..........................................................................................................................................................................................................................................................

55 OObbttaaiinn aa DDHHCCPP--AAssssiiggnneedd IIPP AAddddrreessss.......................................................................................................................................................................................................................... 1111

66 AAssssiiggnn aann IIPP AAddddrreessss MMaannuuaallllyy ........................................................................................................................................................................................................................................ 1155

DDiissaabbllee BBrroowwsseerr CCoommppaattiibbiilliittyy MMooddee.......................................................................................................................................................................................................................... 1199

88 RReeggiisstteerr aa PPrreeddiiccttPPuullssee SSuubbssccrriippttiioonn ........................................................................................................................................................................................................................ 2211

iv Eaton Power Xpert® Gateway PXGX UPS Card Quick Start Instructions 164950240—Rev 2

Table of Contents

Eaton Power Xpert® Gateway PXGX UPS Card Quick Start Instructions 164950240—Rev 2 1

CChhaapptteerr 11 IInnssttaallllaattiioonn CChheecckklliisstt

1. Verify that the following items are available:

oower Xpert Gateway Minislot ( XGS) U S Card package contents (card, cable, Quick Start

Instructions)

ohillips®screwdriver

oAvailable USB port on a computer running Microsoft®Windows®

oWeb browser (Microsoft Internet Explorer®version 8.0 and higher, Mozilla®Firefox®, or

Google Chrome™ are recommended)

2. If you are going to use Dynamic Host Configuration rotocol (DHC ), provide your local network

administrator with the card's MAC address. The MAC address is located on either the shipping box label or

the label on this card.

oMAC Address _______________________________________________

3. If you are not going to use DHC to provide any of the settings listed below, contact your local network

administrator for the settings.

In the table below, check the DHCP check box or enter the values for manual configuration. This data is

referenced later in the procedure.

Item DHCP* Manua Configuration

IPv4 oCard IP Address: _______________________________

Netmask: _____________________________________

Gateway: _____________________________________

DNS – Name Servers oName Server #1:________________________________

Name Server #2:________________________________

Name Server #3:________________________________

DNS – Domain oDomain:_________________________________________

* The network administrator normally sets up the DHCP server to provide a static IP address each time the card makes a

DHCP request

4. If you need e-mail functionality, obtain the SMT mail server's I address or host name. If using the SMT

host name, verify that you also have the Name Server I address (see Step 3).

oSMT (mail server) I Address

or Host Name _______________________________________________________________

2 Eaton Power Xpert® Gateway PXGX UPS Card Quick Start Instructions 164950240—Rev 2

Installation Checklist

Eaton Power Xpert® Gateway PXGX UPS Card Quick Start Instructions 164950240—Rev 2 3

CChhaapptteerr 22 IInnssttaallll tthhee CCaarrdd

NOTE The hot-swappable XGX U S card can be installed without turning off the U S or

disconnecting the load.

To install the XGX U S card:

1. Verify that all six DI switches on the card are in the OFF position (see Figure 1).

Figure 1. Verify DIP Switches are OFF

6 5 4 3 2 1

OFF

2. If not already done, record the MAC address for future reference (see the Chapter 1 Installation Checklist).

3. Remove the X-slot®cover from the U S. Retain the screws.

NOTE If another card is already installed with an attached communication cable, disconnect the

cable and then remove the card.

4. To prevent electrostatic discharge (ESD), place one hand on a metal surface, such as the U S panel.

5. Slide the card into the open slot and secure with the screws removed in Step 2 (see Figure 2).

4 Eaton Power Xpert® Gateway PXGX UPS Card Quick Start Instructions 164950240—Rev 2

Figure . Secure the PXGX UPS Card

Power Xpert Gateway

PXGX UPS

EMP Upstream Downstream

100100 Act Act Setup

Restart

Status

DHCP

Ident

Power

6. From your laptop, go to www.eaton.com/pxgx.

7. On the Features tab, click the Download Configuration File link to download the configuration file.

8. Save the driver configuration file (powerxpert.inf) to the C: drive using the default location or a folder you

select. Note the path of the downloaded file on your computer. (Never download the file to your desktop).

Install the Card

Eaton Power Xpert® Gateway PXGX UPS Card Quick Start Instructions 164950240—Rev 2 5

CChhaapptteerr 33 CCoonnnneecctt tthhee CCaarrdd ttoo tthhee CCoommppuutteerr

To connect the card to the computer:

1. lug the small connector at the end of the supplied USB configuration cable into the setup port on the card

(see Figure 3).

Figure 3. Install the USB Cable

Power Xpert Gateway

PXGX UPS

EMP Upstream Downstream

100100 Act Act Setup

Restart

Status

DHCP

Ident

Power

2. lug the other end of the USB cable into the USB port on the computer. The Windows operating system

detects new hardware.

NOTE If a message indicates that the device driver software was not successfully installed,

click Ignore.

NOTE You may see a pop-up message window that shows “Found new hardware.” This

indicates that the hardware installed successfully.

3. Connect an active Ethernet cable (not supplied) to the Upstream Ethernet connector on the XGX U S

card (see Figure 4).

4. If you are connecting to another XGX U S card or other Ethernet device, connect an Ethernet cable (not

supplied) to the Downstream Ethernet connector on the XGX U S card.

6 Eaton Power Xpert® Gateway PXGX UPS Card Quick Start Instructions 164950240—Rev 2

Figure 4. Install the Ethernet Cable

Power Xpert Gateway

PXGX UPS

EMP Upstream Downstream

100100 Act Act Setup

Restart

Status

DHCP

Ident

Power

5. Wait for the power light and status light on the installed card to illuminate. This takes about two minutes.

6. Open a Web browser and type the default I address (https://169. 54.0.101 for firmware 2.6.0.0 or later,

http://19 .168. 00.101 for earlier firmware versions).

7. Did the ower Xpert Gateway software open to the XGX U S card page?

• If yes, the driver has already been installed automatically. Either verify the I address assigned

through DHC or manually enter a static (fixed) I address for the card’s network connection:

a. To verify the DHC -assigned I address, go to Chapter 5 Obtain a DHCP-Assigned IP Address.

b. To manually enter a fixed I address, go to Chapter 6 Assign an IP Address Manually.

• If no, the driver has not been installed. Go to the next section, Chapter 4 Install the Driver Software in

order to confirm that you have the most current USB Driver software. If not, you will need to install or

update the USB Driver software.

Connect the Card to the Computer

Andere Handbücher für Power Xpert PXGX

Inhaltsverzeichnis

Andere Eaton Steuereinheit Handbücher

Eaton

Eaton mMINT Kurzanleitung

Eaton

Eaton XTPAXENCS65B Handbuch

Eaton

Eaton NZM XBSM Series Handbuch

Eaton

Eaton Box 1 Bedienungs- und Wartungshandbuch

Eaton

Eaton CEAG DLS/3PH-BUS-Module-inverse Service-Handbuch

Eaton

Eaton MSFI-80A Handbuch

Eaton

Eaton Powerware 9395 Bedienungsanleitung

Eaton

Eaton ELCM Series Bedienungsanleitung

Eaton

Eaton NEMA 12 Bedienungsanleitung

Eaton

Eaton Char-Lynn 5 Series Bedienungsanleitung

Eaton

Eaton Cutler Hammer PanelMate ePro 7685 8 Series Bedienungsanleitung

Eaton

Eaton 33 Bedienungsanleitung

Eaton

Eaton Crouse-hinds series Bedienungsanleitung

Eaton

Eaton HK-K95-K150 Bedienungsanleitung

Eaton

Eaton Cuttler-Hammer Pow-R-Command 100 Handbuch

Eaton

Eaton VICKERS DG3V-10 Series Bedienungsanleitung

Eaton

Eaton SL7-AP Series Handbuch

Eaton

Eaton PowerXL DX-NET-ETHERCAT-2 Handbuch

Eaton

Eaton OPTC4 LonWorks Bedienungsanleitung

Eaton

Eaton ELC-MC01 Bedienungsanleitung

Eaton

Eaton PKE-SWD-32 Handbuch

Eaton

Eaton MN024002EN Bedienungsanleitung

Eaton

Eaton OPTCB RS-485 Bedienungsanleitung

Eaton

Eaton PRC-E Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung

Flyron

Flyron FN-BC04 Bedienungsanleitung