EAW AC6 Bedienungsanleitung

Tel 800 992 5013 / +1 508 234 6158

|

www.eaw.com 1

AC6 Stinger Instructions

These instructions are to provide a detailed step by step procedure for using the AC6

Stinger kit.

Inventory your kit

Part # Part Name Quantity Reference

2071927-9999 PLATE LOCKING ASSY 1 A

2071924 M5X20 FLH SKT SS BLK 7 B

2071918-9999 Slide Plate 1 C

2072045-9999 Stinger Mount 2 D

2072041-9999 Stinger 2 E

2071404-9999 Mohawk 1 F

E

D

C

A

B

F

Tel 800 992 5013 / +1 508 234 6158

|

www.eaw.com 2

AC6 Stinger Instructions

Prepare AC6 for Stacking

1. Attach Locking Plate (A) to the top of the rst AC6

• Remove 3x M5x12mm screws from top of AC6 (Figure 1).

• Position Locking Plate over open holes, then use 3x screws (B) to secure plate

to the cabinet (Figure 2)

Figure 3 - Remove screws Figure 4 - Install Slide Plate

2. Attach slide plate (C) to bottom of next AC6

• Remove 4x M5x12mm screws from bottom of AC6 (Figure 3).

• Position Slide Plate over open holes, then use 4x screws (B) to secure plate to

the cabinet (Figure 4)

Figure 1 - Remove screws Figure 2 - Install Locking Plate

Tel 800 992 5013 / +1 508 234 6158

|

www.eaw.com 3

AC6 Stinger Instructions

Connect two AC6 Column loudspeakers with stacking plates

3. Attach two AC6 columns

• Slowly lay down AC6 with slide plate grill down on a rug or blanket

• Insert next unit with locking plate to connect (Figure 5)

• On rear of rst AC6 locking plate, rotate both screw knobs clockwise to lock

into position.

Figure 5 - Attach AC6 columns Figure 6 - AC6 columns grill down

Attach Stinger to AC6 Array

4. Attach Stinger Mounts (D) to AC6

• Center the mount on the Flytracks for each AC6 (Figure 6)

• Turn the knobs on the mount clockwise to lock into place.

Figure 7 - Position Mount Figure 8 - Stinger Mount attached

Tel 800 992 5013 / +1 508 234 6158

|

www.eaw.com 4

AC6 Stinger Instructions

5. Attach Stinger (E) to Mounts

• Place stingers in place on the mounts (Figure 9)

• Use supplied pins to secure the two stingers together

• Using pins on mount, secure stinger assembly to mount plates (Figure 10)

Figure 9 - Position Stingers on mounts Figure 10 - Pin stinger assembly to

mount plate

Figure 11 - Stingers assembled with AC6 array

6. Attach Mohawk (F) and suspend/y array

• Attach Mohawk with pins at the end of the stinger (Figure 12)

• Once all pins and knobs are veried as secure, suspend array using a shackle.

Figure 12 - Attach Mohawk to Stinger

Figure 13 - Mohawk installed on Stinger Figure 14 - Completed Stinger Array

Andere Handbücher für AC6

3

Inhaltsverzeichnis

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung