Ebyte E180-ZGI20B-TB Bedienungsanleitung

E180-ZG120B-TB User Manual

Chengdu Ebyte Electronic Technology Co., Ltd. E180-ZG120B-TB User Manual

Content

1. Module introduction......................................................................................................................................... 2

2. Instruction......................................................................................................................................................... 2

3. Drive installation.............................................................................................................................................. 4

About us................................................................................................................................................................4

Chengdu Ebyte Electronic Technology Co., Ltd. E180-ZG120B-TB User Manual

1. Module introduction

E180-ZG120B-TB has been pre-welded for testing Chengdu Ebyte E180-ZG120B,please refer to the module

manual for detailed use.

All IO of E180 series wireless modules have been exported.

With CP2102G serial chip, serial communication can be developed.

With USB interface, can be directly plugged into the computer for use.

Users can access external power supply and serial port by themselves.

Stable work and easy to develop.

2. Instruction

Chengdu Ebyte Electronic Technology Co., Ltd. E180-ZG120B-TB User Manual

Description：

No.

Description

AVDD

Module power port, 3.3V power

supply is recommended

3.3V

Baseboard LDO output 3.3V, can

supply power to the module

TXD

TXD of cp2102

RXD

RXD of cp2102

PA1

RXD of the module

PA0

TXD of the module

No.

Name

Direction

Function

GND

Ground, connected to power supply reference ground

GND

Ground, connected to power supply reference ground

PD13

Input

TOUCHLINK pin, which is continuously pulled lower than 3000ms,

will initiate a ZLL network establishment or join request

PD14

Input

WAKE pin is mainly used to wake up the sleep terminal. It is high level

when powered on. When the pin is pulled low externally, the sleep

terminal device will be woken

PA0(TX)

Output

Serial port transmission port TX

PA1(RX)

Input

Serial port receiving port RX

PA2

Input/Outp

Reserve

PA4

Input/Outp

Reserve

PB11

Input

Operating mode switching pin. When the pull-low time is longer than

500ms, the operating mode is switched.

PB12

Input

UART_BAUD_RESET pin is used to reset the device baud rate. The

power-on default is high level. In any mode, if this pin is pulled lower

for more than 1000ms, the serial port parameters of the module will be

restored to the default 115200.

PB13

Output

ACK pin is used to indicate the last user data transmission status. This

pin is pulled low before the transmission is started, and the pin is pulled

high after the transmission.

PB14(GPIO0)

Input/Outp

GPIO Input/ Output port 0

3.3V

Module power supply positive reference voltage, voltage range

GND

Ground, connected to power supply reference ground

Chengdu Ebyte Electronic Technology Co., Ltd. E180-ZG120B-TB User Manual

PB15(GPIO1)

Input/Outp

GPIO Input/ Output port 1

PA5

Input/Outp

Reserve

PA3

Input/Outp

Reserve

PD15

Output

AUX pin indicates the current working status of the device. When the

pin is low level, it indicates that the device is busy, and high level

indicates that the device is idle.

PC6(GPIO2)

Input/Outp

GPIO Input/ Output port 2

PC7(GPIO3)

Input/Outp

GPIO Input/ Output port 3

PC8(ADC1)

Input

ADC detection port 1

PC9(ADC2)

Input

ADC detection port 2

PC10(ADC3)

Input

ADC detection port 3

PC11(ADC4)

Input

ADC detection port 4

SWCLK

Input/Outp

DBG_SWCLKTCK

SWDIO

Input/Outp

DBG_SWDIOTMS

PF2(PWM0)

Output

PWM output port 0

PF4(PWM2)

Output

PWM output port 2

PF5(PWM3)

Output

PWM output port 3

PF7

Output

The LINK pin indicates the current network status of the module, output

high level meter has been added to the network.

PF6(PWM4)

Output

PWM output port 4

PF3(PWM1)

Output

PWM output port 1

PD12

Input/Outp

Reserve

PD11

Input/Outp

Reserve

PD10

Input/Outp

Reserve

GND

Input/Outp

Ground, connected to power supply reference ground

nRESET

Input

Reset pin

3. Drive installation

The CP2102 chip is used as the serial port. Please download and use the driver software provided by our company.

After installation, the serial port can be identified in the device manager.

About us

Sales hotline: 4000-330-990 Tel: 028-61399028

Support: support@cdebyte.com Website: www.ebyte.com

Address: Innovation Center B333~D347, 4# XI-XIN road, High-tech district (west), Chengdu, Sichuan,

China

Inhaltsverzeichnis

Andere Ebyte Steuereinheit Handbücher

Ebyte

Ebyte E28-2G4T12S Bedienungsanleitung

Ebyte

Ebyte E840-TTL-4G02E Bedienungsanleitung

Ebyte

Ebyte E104-BT52 Bedienungsanleitung

Ebyte

Ebyte E30-490T20S Bedienungsanleitung

Ebyte

Ebyte E70-915NW30S Bedienungsanleitung

Ebyte

Ebyte E150-400T30S Bedienungsanleitung

Ebyte

Ebyte E34-2G4D27D Bedienungsanleitung

Ebyte

Ebyte E220-900T30D Bedienungsanleitung

Ebyte

Ebyte E78-915LN22S (6601) Bedienungsanleitung

Ebyte

Ebyte E78-900M22S1A Bedienungsanleitung

Ebyte

Ebyte E104-BT09 Bedienungsanleitung

Ebyte

Ebyte E220-900M30S Bedienungsanleitung

Ebyte

Ebyte E30-TTL-100 Bedienungsanleitung

Ebyte

Ebyte E180-ZG120A Montageanleitung

Ebyte

Ebyte E21-400G37S Bedienungsanleitung

Ebyte

Ebyte E78-400M22S Bedienungsanleitung

Ebyte

Ebyte E79-900DM2005S Bedienungsanleitung

Ebyte

Ebyte LoRa SX-1276 1W Bedienungsanleitung

Ebyte

Ebyte E180-Z5812SP Bedienungsanleitung

Ebyte

Ebyte E840-TTL-NB03 Bedienungsanleitung

Ebyte

Ebyte E22-900M22S Bedienungsanleitung

Ebyte

Ebyte E22-400M33S Bedienungsanleitung

Ebyte

Ebyte E01-ML01S Bedienungsanleitung

Ebyte

Ebyte E34-2G4D20D Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung