die lust am hören
Marketing - Dienstleistung - Schnellhörtester - Hörgeräte-Servicetools
page 4 of 9 Update April 2022
5. Delivery/Transport Regulations/Installation Instructions
The ecco cleaner will be delivered in the 230 V and 50 Hz version.
The ambient temperature should be – 5° up to + 40°C max. Please use
the ecco cleaner indoor only. The incorporated electrical parts must be
protected against direct wetness. Please make sure that the ecco
cleaner is installed in a suitably ventilated place.
Delivery includes: ecco cleaner, red and blue hose, drying cup, cleaning
attachments, black needle holder for 10 needles and the cleaning fluid,
ecco clean cleaning solution (Caution when using for the first time.
Once open lid carefully, because of eventual excess pressure in the
cylinder), power cord and instruction manual.
6. Cleaning of Receiver and Microphone of the Hearing Aids
Before cleaning and drying the hearing aids we recommend removing
the filter systems and supporting hooks.
In order to use the vacuum hose, the hoses must be introduced in the
corresponding hole (red sucking, blue air). Choose the corresponding
attachment out of the delivered attachments which best fits the
microphone, resp. receiver aperture and connect this attachment with
the red hose. You will find the attachments below the cover at the left
upper side of the equipment.
Switch on equipment.
Press the switch placed on the left hand side downwards on „SAUGEN“
(SUCKING). The chosen function will be shown by the light emitting
diode (green).Press the switch placed on the right hand side downwards
on „DAUER“ (PERMANENTLY). The yellow light emitting diode will burn:
The equipment is switched on.
