ECD SmartDRY SD Series Bedienungsanleitung

SD Series Dry Cabinets Setup and Operation Manual

ECD

ECD NORTH AMERICA

(US, CANADA, MEXICO, CENTRAL AND SOUTH AMERICA)

Worldwide Headquarters

4287-B S.E. International Way

Milwaukie, Oregon 97222-8825 U.S.A.

Telephone:

+1 800.323.4548

+1 503.659.6100

FAX:

+1 503.659.4422

Email:

[email protected]

[email protected]om

Internet:

http://www.ecd.com

EMEA (EUROPE, MIDDLE EAST, AFRICA)

UK Office

Mobile::

+44 (0) 7903 252560

Email:

ecd.europe@ecd.com

APAC (ASIA-PACIFIC, CHINA, INDIA)

Singapore Office

Telephone:

+65 9692.6822

Email:

ecd.asia@ecd.com

ecd.china@ecdchina.cn

mation in this publication supersedes all previously published information. This Publication may not be translated and/or reproduced or

stored in data retrieval system, or transmitted in any form or by any means without the express written permission of ECD. Specification

and price change privileges reserved.

The trapezoidal ECD logo® is a registered trademark of ECD. SmartDRY™ is a trademarked by ECD.

While every precaution has been taken in the preparation of this document, ECD assumes no responsibility for errors or omissions, or

for damages resulting from the use of information contained in this document or from the use of programs and source code that may

accompany it. In no event shall ECD be liable for any loss of profit or any other commercial damage caused or alleged to have been

caused directly or indirectly by this document.

Declaration of Conformity

Electronic Controls Design, Inc.

4287-B S.E. International Way

Milwaukie, Oregon U.S.A. 97222-8825

(503) 659-6100 / (800) 323-4548

FAX: (503) 659-4422

Declaration of Conformity

Product:

ECD SmartDRY™ 3D-10 & 3D-10SB

Part Number:

E62-3310-30/35

E62-3310-60/65

ECD SmartDRY™ 3D-30 & 3D-30XD

E62-3330-30/35

E62-3339-30/35

The undersigned hereby declares, on behalf of the ECD Inc., that the above-referenced product, to which this

declaration relates, is in conformity with the provisions of:

SAFTEY:

IEC 61010-1 “Safety requirements for electrical equipment for measurement, control, and laboratory use -

Part 1: General requirements”

EMISSIONS:

EN 61000-3-2:2014 “Electromagnetic Compatibility (EMC) - Limits For Harmonic Current Emissions …”

EN 61000-3-3:2013 “Electromagnetic Compatibility (EMC) - Limitation of voltage changes, voltage fluctua-

tions and flicker …”

EN 61000-6-4:2007+A1:2011 Class A “Electromagnetic compatibility (EMC) - Emission standard for industrial

environments”

FCC 15.107:2015 Class A “Conducted Limits”

FCC 15.109(g):2015 Class A “Radiated emission limits”

ICES-003:2012 Class A “Information Technology Equipment (ITE) – Limits”

IMMUNITY:

EN 61000-6-1:2007 “Electromagnetic Compatibility (EMC). Immunity for residential, commercial and light-

industrial environments”

The Technical Construction File required by this Directive is maintained at the corporate headquarters of ECD, Inc.

Name:

Paul Austen

Position:

Senior Project Engineer

Signature:

Date:

August, 2015

CONTENTS

1.0 Introduction ......................................................................................................................................................................................... 1

2.0 Receiving and Inspection .....................................................................................................................................................................3

2.1 Inspection......................................................................................................................................................................................... 3

2.2 Loss or Damage ................................................................................................................................................................................ 3

2.3 Shipping Materials ...........................................................................................................................................................................3

2.4 Return Shipment ..............................................................................................................................................................................3

2.5 Accessories....................................................................................................................................................................................... 3

3.0 Graphic Symbols .................................................................................................................................................................................. 4

4.0 Operators Safety Information..............................................................................................................................................................7

5.0 Setup and Installation .......................................................................................................................................................................... 8

5.1 Power Source ................................................................................................................................................................................... 8

5.2 Location............................................................................................................................................................................................ 9

5.3 Lifting and Handling .......................................................................................................................................................................10

5.4 Leveling .......................................................................................................................................................................................... 10

5.5 Filiment Reel Rack Placement........................................................................................................................................................ 11

5.6 Light Tower (Optional) ................................................................................................................................................................... 13

6.0 Control Panel .....................................................................................................................................................................................15

6.1 Main Display................................................................................................................................................................................... 15

6.1.1 Current RH ..............................................................................................................................................................................16

6.1.2 Current Temperature.............................................................................................................................................................. 16

6.1.3 Status Indicators ..................................................................................................................................................................... 17

6.1.4 Count Down Timer .................................................................................................................................................................. 19

6.1.5 Graph Display.......................................................................................................................................................................... 19

6.1.6 Menu System .......................................................................................................................................................................... 20

6.2 OK................................................................................................................................................................................................... 21

6.3 Down Arrow ................................................................................................................................................................................... 21

6.4 Up Arrow........................................................................................................................................................................................21

6.5 Interior Lighting.............................................................................................................................................................................. 22

6.6 Alarm Mute .................................................................................................................................................................................... 22

6.7 Alarm Cancel .................................................................................................................................................................................. 23

7.0 Network Dashboard...........................................................................................................................................................................24

7.1 Dashboard......................................................................................................................................................................................24

7.2 Settings ..........................................................................................................................................................................................26

7.3 Setup .............................................................................................................................................................................................. 27

7.4 Viewing Initial ECD SmartDRY™ Data.............................................................................................................................................27

8.0 Quick Start..........................................................................................................................................................................................28

8.1 Safety and Installation ................................................................................................................................................................... 30

8.2 Location.......................................................................................................................................................................................... 30

8.3 filiment Reel Rack Configuration ................................................................................................................................................... 30

8.4 Power .............................................................................................................................................................................................30

8.5 Time Settings.................................................................................................................................................................................. 31

8.6 Clear History................................................................................................................................................................................... 34

9.0 Operation ........................................................................................................................................................................................... 36

9.1 ECD SmartDRY™ Menu System ...................................................................................................................................................... 38

9.1.1 RH Setpoint ............................................................................................................................................................................. 39

9.1.2 Alarms (SmartDRY™ Mode) ....................................................................................................................................................41

9.2 SmartBAKE™ Menu (Model 3D-10SB Only) ..................................................................................................................................45

9.2.1 Smart Settings .........................................................................................................................................................................46

9.2.2 Manual Bake ........................................................................................................................................................................... 48

9.2.3 Alarms (SmartBAKE™ Mode)................................................................................................................................................... 50

9.3 Other Settings ................................................................................................................................................................................ 55

9.3.1 Units ........................................................................................................................................................................................ 55

9.3.2 Date/Time ............................................................................................................................................................................... 57

9.3.3 Data Logging ...........................................................................................................................................................................59

9.3.4 Network .................................................................................................................................................................................. 61

9.3.5 Sensor ..................................................................................................................................................................................... 63

9.3.6 Lighting.................................................................................................................................................................................... 65

9.3.7 Passcode ................................................................................................................................................................................. 67

9.4 Help................................................................................................................................................................................................ 69

9.5 Graph ............................................................................................................................................................................................. 70

10.0 Equipment Maintenance .................................................................................................................................................................71

10.1 Cleaning ....................................................................................................................................................................................... 71

10.2 ECD SmartDRY™ Humidity and Temperature Sensor ..................................................................................................................72

10.3 Clock Battery ................................................................................................................................................................................ 73

10.4 ECD SmartDRY™ Dryer ................................................................................................................................................................. 74

10.5 Power Board ................................................................................................................................................................................76

10.6 RH/Temperature Probe ...............................................................................................................................................................80

10.7 SmartBAKE™ Heater..................................................................................................................................................................... 81

10.8 Door Switch..................................................................................................................................................................................83

10.9 LIGHT TOWER REPLACEMENT......................................................................................................................................................84

11.0 Service and Troubleshooting ........................................................................................................................................................... 90

11.1 Main Display is Black:...................................................................................................................................................................90

11.2 RH Set Point is not Achieved:....................................................................................................................................................... 91

11.3 Bake Temperature Set Point is not Achieved: ............................................................................................................................. 91

11.4 System Alerts ...............................................................................................................................................................................92

11.5 Updating ECD SmartDRY™ Cabinet Firmware and Network Dashboard .....................................................................................93

11.6 System Reset................................................................................................................................................................................ 94

11.7 Contact Information..................................................................................................................................................................... 96

Appendix ..................................................................................................................................................................................................97

Appendix A: Parts List ..........................................................................................................................................................................97

Appendix B: Specifications................................................................................................................................................................... 98

Appendix C: Schematic ......................................................................................................................................................................100

AppendiX D: Gossary..........................................................................................................................................................................102

Appendix E: Network .........................................................................................................................................................................110

SD Series Dry Cabinets Setup and Operation Manual | A62-3337-00 Rev: 1.0.0 Page 1

1.0 INTRODUCTION

Thank you for purchasing an ECD SmartDRY™ Cabinet. We know that in today’s competitive market place, cus-

tomers have several choices when purchasing a dry storage cabinet. Our continued reputation as a leading

supplier of process and measurements tools depends of each customer’s continued satisfaction. ECD, Inc.

stands behind our products and wants to let you know we are here if you need us.

Before you use the ECD SmartDRY™ Cabinet, read this entire manual carefully to understand how to install,

operate, and maintain the unit in a safe manner. Your satisfaction with the unit will be maximized as you read

about its safety and operational features.

Keep this manual on-hand so it can be used by all operators of the unit. Be sure all operators of the unit are

given appropriate training before you put the unit in service.

This Setup and Operation Manual explains how to install use ECD SmartDRY™ Cabinet and Network Dash-

board.

This Setup and Operation Manual is written for users of varied experience. If a section covers information you

already know, feel free to skip to the next section.

Hardware portions of this manual are written to reflect the following firmware version 00.00.01

and higher.

The Network Dashboard portions reflect version(s) 1.06 and higher.

This Quick Start Guide is designed to help the user to familiarize themselves with the equipment and perform

basic setup. For detailed information, please refer to the Setup and Operation Manual.

The ECD SmartDRY™ Cabinet is ready to plug in and begin using as soon as it is safely set up. No additional pro-

gramming is required. Once unpacked, here are some steps to quickly get your Cabinet up and running.

SD Series Dry Cabinets Setup and Operation Manual | A62-3337-00 Rev: 1.0.0 Page 2

Although pre-programmed, the Cabinet must run for a minimum of 8 hours to acclimate and regenerate its

dryer module. Please allow this time before adding your filiment. Also, the alarm limits have been pre-pro-

grammed however, are not enabled. Once the Cabinet has stabilized at set point, the alarms can be enabled if

desired. You may also want to explore the other Alarms: SmartDRY™ Temperature, SmartBAKE™ RH, and

SmartBAKE™ Temperature, enabling them as you wish. Refer to section 9.1.2 Alarms (SmartDRY™) in the

Setup and Operation Manual for detailed information.

When accessing options that require a Passcode the system default Passcode is 314. As you enter

protected options, you will be prompted to enter it using the Up or Down buttons. Once se-

lected, all locked options remain “unlocked” until you return to the Main Display.

1) When prompted, Press and hold the Up or Down button to navigate to Passcode 314.

Press the OK button to be able to edit the protected field.

SD Series Dry Cabinets Setup and Operation Manual | A62-3337-00 Rev: 1.0.0 Page 3

2.0 RECEIVING AND INSPECTION

IMPORTANT: READ THIS MANUAL IMMEDIATELY.

Your satisfaction and safety require a complete understanding of the ECD SmartDRY™ Cabinet, including its

proper function and operation. Be sure operators are given adequate training before attempting to put the

cabinet in service.

This equipment must be used only for its intended application; any alterations or modifications

will void your warranty.

2.1 INSPECTION

The carrier, when accepting shipment, also accepts responsibility for safe delivery and is liable for loss or dam-

age claims. On delivery, inspect for visible exterior damage. Note and describe on the freight bill any damage

found and enter your claim on the form supplied by the carrier.

2.2 LOSS OR DAMAGE

Inspect for concealed loss or damage on the cabinet itself, both interior and exterior. If any, the carrier will

arrange for official inspection to substantiate your claim.

2.3 SHIPPING MATERIALS

Save the shipping crate until you are sure the unit has been delivered in good condition.

2.4 RETURN SHIPMENT

If for any reason you must return the unit, contact ECD for a Return Materials Authorization (RMA). Be pre-

pared to supply the Model Number and Serial number located on the Serial number label when requesting an

RMA. Please refer to 11.0 Service and Troubleshooting for information for contact information or visit

www.ecd.com.

2.5 ACCESSORIES

Verify all of the equipment indicated on the packing list is included with the unit. Carefully check all packaging

before discarding.

SD Series Dry Cabinets Setup and Operation Manual | A62-3337-00 Rev: 1.0.0 Page 4

3.0 GRAPHIC SYMBOLS

The ECD SmartDRY™ Cabinet and this Setup and Operation Manual uses graphic symbols which help identify at

a glance several Dangers, warnings, functions, as well as indicate the status of the cabinet:

Product Symbols:

Warning: Whenever this internationally recognized symbol is used on the product, additional infor-

mation concerning that particular feature or function appears in the Setup and Operation Manual.

Warning: Warm surface or vent. Keep clear; do not touch or block.

Warning: Electrical Shock/Electrocution Hazard. Do not remove this cover.

Ground point.

Waste Electrical and Electronic Equipment (WEEE). Unit should be recycled; Do not disposed of in

land-fill.

European Conformity

UK Conformity Assessed

ETL Listed Mark - Intertek

Andere Handbücher für SmartDRY SD Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ECD Trockner Handbücher

ECD

ECD SmartDRY SD Series Bedienungsanleitung

Beliebte Trockner Handbücher anderer Marken

Bosch

Bosch WTA79200GB Bedienungsanleitung

Amana

Amana W10233410A Bedienungsanleitung

Miele

Miele TWH 780 WP Bedienungsanleitung

Asko

Asko T760 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Bedienungsanleitung

Bosch

Bosch Logixx 10 WTB76556GB Technisches Datenblatt

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Bedienungsanleitung

Electrolux

Electrolux EW2H328R2 Bedienungsanleitung

Beko

Beko DS8433RX1M Bedienungsanleitung

Dawlance

Dawlance Spinner DS 6000 C Bedienungsanleitung

Electrolux

Electrolux TP5080TW Bedienungsanleitung

AEG

AEG TR838P4OB Bedienungsanleitung

Indesit

Indesit IDV 75 Bedienungsanleitung

Infiniton

Infiniton SD-DG85C Bedienungsanleitung

BOMANN

BOMANN WT 5019 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Bedienungsanleitung

Asko

Asko T793C Bedienungsanleitung

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer Bedienungsanleitung