Echo Power Pruner PP-1200 Bedienungsanleitung

Power Pruner

Operator'sManual

MODEL 99946400040

Hedger Attachment

FOR: PP-1200, PP- 1250,

PP-1260, PP-1400,

PPT-2100, PPT-2400,

PPFD-2400

WARNING DANGER

Readrulesforsafeoperationandinstructionscarefully. ECHOprovidesanOperator'sManualwithyour

originalPowerPruner. TheOperator’s manualandthismanual mustbereadandunderstoodforproper

andsafeoperation.

X7502300900 89865022460

06/98

ENGLISH

FRANCAIS

ESPAÑOL

INTRODUCTION

Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job-

dependability. Read and understand this manual before operating the unit. You will find it easy to read and full of

helpful operating tips and SAFETY messages.

WARNING DANGER

Read rules for safe operation and instructions carefully. ECHO provides an Operator's Manual with your original

Power Pruner. The Operator’s manual and this manual must be read and understood for proper and safe operation.

THE OPERATOR'SMANUAL --

contains specifications and information for operation, starting,

stopping, maintenance, storage and assembly specific to this product.

CONTENTS

• Hedger Attachment

• Tool, Spanner

• Operator’s Manual

TABLE OF CONTENTS

Introduction ...............................................................2

- The Operator's Manual........................................2

- Contents .............................................................2

ManualSafety Symbols &Important Information .....3

Safety .........................................................................3

- Decals..................................................................4

- Kickout ................................................................4

Assembly ...................................................................5

- Hedger Attachment Installation .........................5

Operation ...................................................................6

- Pruning Techniques ...........................................6

- Maintenance .......................................................6

- HedgerBladeReplacement .................................7

- BladeSharpening................................................7

ServicingInformation.................................................8

- Parts....................................................................8

- Service ................................................................8

- ECHOConsumerProductSupoort......................8

- Warranty Card ....................................................8

- Additional or Replacement Manuals .................. 8

- Manual Ordering Instructions ............................8

Specifications, descriptions and illustrative material in this

literature are as accurate as known at the time of

publication, but are subject to change without notice.

Illustrations may include optional equipment and

accessories, and may not include all standard equipment.

POWER PRUNER HEDGER ATTACHMENT

OPERATOR'SMANUAL 3

SAFETY

WARNING DANGER

Read rules for safe operation and instructions carefully. ECHO

provides an Operator's Manual with your original Power Pruner.

The Operator’s Manual and this manual must be read and under-

stood for proper and safe operation.

• Wear eye, face, head, hearing, hand and proper clothing for protec-

tion.

• Review the area to be trimmed. Look for hazards that could contribu-

tor to unsafe conditions. DO NOT operate unit if any wires (power,

telephone, cable, etc.) are closer than 15M (50 ft.) to any part of the

operatororunit. PPT-2100/2400 are notinsulated against electical

current.

• Spectators and fellow workers must be warned, and children and

animalsprevented from coming nearerthan 15 M (50ft.) while the

Power Pruner is in use.

• Before each use inspect the entire attachment for breaks or cracks. If

theHedgeris damaged in any way repair it immediately.DONOTUSE

ADAMAGEDATTACHMENT.

• Use only a sharp, properly secured blade approved by ECHO for the

Power Pruner Hedger Attachment.

• Use only one ECHO approved extension on the Pruner.

• Cut only wood. Avoid striking concrete, metal, wire, or other obstruc-

tions which could cause kickout or damage to the blade.

• ECHO, INC. will not be responsible for the failure of cutting devices

or accessories which have not been tested and approved by ECHO

for use with this unit.

WARNING DANGER

• Serious injury may result from the use of non approved blade.

Read and comply with all safety instructions listed in this manual.

IMPORTANT

NOTE

MANUAL SAFETY SYMBOLS & IMPORTANT INFORMATION

Throughout this manual and on the product itself, you will find safety

alerts and helpful, information messages preceded by symbols or key

words. The following is an explanation of those symbols and key words

and what they mean to you.

This symbol accompanied by the words WARNING and

DANGER calls attention to an act or condition that can lead

to serious personal injury to operator and bystanders.

The circle with the slash symbol means whatever is shown

within the circle is prohibited.

IMPORTANT The enclosed message provides

information necessary for the protection of the

unit.

NOTE This enclosed message provides tips for

use, care and maintenance of the unit.

Guard

WARNING DANGER

•Read and understand owners

manual before use.

•Do not operate within 15 meters

(50 feet) of electrical hazards.

•Use only Echo approved Hedger

Blade.

•Blade can thrust violently away

from material.

•Blade can throw debris and

objects violently.

•Keep nut on blade shaft tight.

•Coasting blade can seriously cut

you or others.

•Do not operate without guard.

Failure to follow these instructions

can result in serious

personal injury.

X5052300501

DECALS

Locate this safety decal on your attachment. Make sure the decal is

legible and that you understand and follow the instructions on it. If a

decal cannot be read, a new one can be ordered from your ECHO dealer.

SeePARTSORDERINGinstructionsforspecificinformation.

KICKOUT

WARNING DANGER

Kickout can lead to dangerous loss of control of the Power Pruner

and result in serious injury to the operator or anyone standing

close by.

Kickout may occur when the moving blade accidentally touches an

object, or when the blade contacts material it cannot cut. In some cases

this may cause a lightning-fast reverse action, thrusting the Power

Pruner up and toward or down and away from the operator. Either of

these reactions may cause the operator to lose control of the unit which

could result in serious personal injury.

With a basic understanding of kickout, you can reduce or eliminate the

element of surprise which contributes to accidents.

Hold the unit firmly with both hands. Be aware of the path the cutting

attachment will take after the cut is made.

The blade will continue to coast after throttle is released. Avoid

accidental contact of the blade with any object while the blade is

moving.

Cut only wood. Avoid striking concrete, metal, wire or other obstruc-

tions which could cause kickout or damage to the blade.

If the blade does strike a foreign object, immediately stop the engine,

inspect and repair the Power Pruner if necessary.

NOTE

Refer to Safe Operation section, in your Power Pruner Operator’s

Manual, for proper shoulder strap adjustment.

POWER PRUNER HEDGER ATTACHMENT

OPERATOR'SMANUAL 5

BLADE

GUARD

TOP

Fig.1

ASSEMBLY

HEDGER ATTACHMENT INSTALLATION

Tools Required: Cross Head/Flat Head Screwdriver

Parts Required: Hedger Attachment

WARNING DANGER

The Hedger Attachment blade is sharp! Always wear gloves when

handling assembly, otherwise serious personal injury may result.

1. Loosen the four (4) screws (A) and locator screw (B) on chain saw

attachment.

NOTE

Do not remove screw (B) completely from chain saw attachment,

otherwise inner lock nut will come loose and be lost.

2. Slide chain saw attachment off aluminum housing.

(PPFD-2400)

3A. Go to step five (5).

(PPT-2100, PPT-2400)

3B. Loosen center clamp knob (D) turning counter clockwise.

(PPT-2100, PPT-2400)

4. Pull aluminumhousing(E)out offiberglasshousing127mm(5 in.)or

152mm(6in.),thenslide (E) back into fiberglasshousingleaving

inner drive shaft (F) exposed. Align and join star shaped drive end of

inner drive shaft (F) with hedger attachment shaft (G).

(ALLMODELS)

5. Align ridges on aluminum housing (E) with seams in hedger attach-

ment and slide onto housing. Hedger attachment guard must be

positioned properly when installed onto housing. (See Fig. 1)

6. Tighten four (4) hedger attachment screws (A).

(PPT-2100, PPT-2400)

7. Position upper drive shaft housing to desired extension length.

Tighten center clamp knob (D) turning clockwise.

OPERATION

NOTE

Refer to your Power Pruner Operator’s Manual for correct engine

fueling, starting and stopping instructions.

WARNING DANGER

All over head electrical conductors and communications wires can

have electricity flow with high voltages. Never touch wires directly

or indirectly when pruning, otherwise serious injury or death may

result.

PRUNING TECHNIQUES

The Hedger attachment is designed for light to medium trimming of new

growthlimbsandbranchesup to38mm(1-1/2")indiameter.Follow

these tips for successful operation.

• Plancutcarefully.Checkdirectiondebriswillfall.

• Plan retreat path from falling debris. Cut branches bounce when

striking ground.

• Inspect area for hidden electrical lines.

• Do not stand directly beneath material being cut.

• Spectators and fellow workers must be warned, and children and

animalsprevented from coming nearerthan 15 M (50ft.) while the

Power Pruner is in use.

• Use a short sweeping motion to shape trees and shrubs.

• When ready to cut:

1. Accelerate to full throttle.

2. Tilt the top of the hedger slightly toward the hedge when making

an upward sweep. Tilt the bottom of the hedger slightly toward the

hedge when making a downward sweep. The hedger will cut in both

directions.

3. For heavier trimming it may be necessary to slow the sweeping

motion to ensure optimum cut.

• DONOTusefor felling or bucking.

MAINTENANCE

• Grease gear case with lithium based grease every 3 months/100 hours

or 6 months/1 year.

POWER PRUNER HEDGER ATTACHMENT

OPERATOR'SMANUAL 7

HEDGER BLADE REPLACEMENT

ToolsRequired: 19mm(3/4”)Spanner,14mm(9/16”)Spanner

PartsRequired: Blade,P/N69601522060

WARNING DANGER

Failure to follow blade mounting instructions can cause blade to be

thrown from Hedger Attachment and result in serious injury to the

operator or anyone standing nearby.

1. Remove saw shaft end ring (A).

2. Hold saw spacer (D), located between guard and blade, with 19mm

(3/4”) spanner. Remove flange nut (B) turning counter clockwise.

3. Lift offouter saw collar(C) and blade.

4. Install new blade on inner saw collar (C) and saw spacer (D). Blade

teeth should be angled toward direction of blade rotation.

5. Install outer saw collar (C) and flange nut (B).

6. Hold blade adaptor (D) from turning with spanner, and tighten nut

(B)securelywith14mm(9/16”)spannerturningclockwise.

7. Install shaft end ring (A).

BLADE SHARPENING

ToolsRequired: Medium60 degree Triangular SawFile,Vise

1. Secure hedger blade vertically in a vise with teeth angled to the

right.

2. Uniformly file each blade tooth to the angle specification shown.

ECHO, INCORPORATED

400OAKWOOD ROAD

LAKEZURICH,IL 60047

DEALER?

Call

1-800-432-ECHO

ECHOIncorporated

400 Oakwood Road

LakeZurich,IL 60047

TechnicalPublicationsOrders

SERVICING INFORMATION

PARTS

GenuineECHOPartsandECHORePowerPartsandAssembliesfor

yourECHOproductsareavailableonlyfromanAuthorizedECHO

Dealer. When you do need to buy parts always have the Model

Number, Type number and Serial Number of the unit with you. You can

find all three numbers on the engine housing. For future reference,

write them in the space provided below.

Model No. ____________ Type No. ____________ SN. __________

SERVICE

Service of this product during the warranty period must be performed

by an Authorized ECHO Service Dealer. For the name and address of

the Authorized ECHO Service Dealer nearest you, ask your retailer or

call: 1-800-432-ECHO. Whenpresenting your unitfor Warranty

service/repairs, proof of purchase is required.

ECHO CONSUMER PRODUCT SUPPORT

If you require assistance or have questions concerning the application,

operation or maintenance of this product you may call the ECHO

ConsumerProductSupportDepartmentat1-800-673-1558from8:00am

to5:00pm(Central Standard Time) Monday through Friday.Before

calling, please know the model and serial number of your unit to help

your Consumer Product Support Representative.

WARRANTY CARD

This card is our means of registering all original owners of ECHO

equipment. The card plus proof of purchase provides you the assur-

ance that authorized warranty work will be done. It also provides a

direct link between you and ECHO if we find it necessary to contact

you.

ADDITIONAL OR REPLACEMENTMANUALS

Owner'sandPartsManualsareavailableforpurchasefromyourECHO

dealerordirectlyfromECHO.[Seeorderinginstructionsbelow.]

ORDERING INSTRUCTIONS

To obtain a Parts Catalog or Owner's Manual send a check or money

orderfor $2.00 per Parts Catalogor$1.50perOwner'sManualmade

payable to ECHO, INCORPORATED. State on a sheet of paper the

model number and serial numbe of the ECHO unit you have, part

number of the manual (if known), your name and address and mail to address above.

Available Parts Catalog

PPT-2100 Type1/1E S/N001001 & Up 99922202951

PPT-2400 Type1/1E S/N001001 & Up 99922202952

PPFD-2400 Type 1E S/N001001 & Up 99922202975

99946400040 S/NALL 99922202936

CONSUMER PRODUCT

SUPPORT

1-800-673-1558

8 - 5 Mon - Fri C.S.T.

Andere Handbücher für Power Pruner PP-1200

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Echo Trimmer Handbücher

Echo

Echo SRM-231U Bedienungsanleitung

Echo

Echo SHC-225 Bedienungsanleitung

Echo

Echo Pro Attachment PAS-225 Bedienungsanleitung

Echo

Echo SRM-261T Bedienungsanleitung

Echo

Echo Rapid Loader 99944200610 Bedienungsanleitung

Echo

Echo Pro Attachment Series PAS-265 Bedienungsanleitung

Echo

Echo SRM-266T Bedienungsanleitung

Echo

Echo SRM-260 - PARTS CATALOG SERIAL NUMBERS... Bedienungsanleitung

Echo

Echo HCR-1510 Montageanleitung

Echo

Echo 99944200610, SRM-2100SB, SRM-2400SB, SRM-210SB, SRM-211SB, SRM-260SB, SRM-261SB, PAS-2100, PAS-2400, PAS2601, PAS-210,... Bedienungsanleitung

Echo

Echo GT-200R - PARTS CATALOG SERIAL NUMBER 07001001-... Bedienungsanleitung

Echo

Echo SRM-510ES Bedienungsanleitung

Echo

Echo SRM-251U Bedienungsanleitung

Echo

Echo HC-331ES Bedienungsanleitung

Echo

Echo WT190 Bedienungsanleitung

Echo

Echo GT-200 - PARTS CATALOG SERIAL NUMBER 08001001-... Bedienungsanleitung

Echo

Echo SRM-210 - PARTS CATALOG SERIAL NUMBERS... Bedienungsanleitung

Echo

Echo SRM-230 - PARTS CATALOG SERIAL NUMBERS... Bedienungsanleitung

Echo

Echo SRM-225SB Bedienungsanleitung

Echo

Echo SRM-210 - PARTS CATALOG SERIAL NUMBERS... Bedienungsanleitung

Echo

Echo WT190 Bedienungsanleitung

Echo

Echo SRM-225i Bedienungsanleitung

Echo

Echo SRM-260U Bedienungsanleitung

Echo

Echo GT-1100 Bedienungsanleitung

Beliebte Trimmer Handbücher anderer Marken

MTD

MTD HT 51 E Bedienungsanleitung

McCulloch

McCulloch T22 LS Bedienungsanleitung

COCKRAFT

COCKRAFT PRO HL36-S Bedienungsanleitung

Grizzly

Grizzly CT 1800 Li Bedienungsanleitung

Peco

Peco Z Trimmer ZT-3000 Bedienungsanleitung

Solo

Solo 116 Bedienungsanleitung

Stiga

Stiga ST 1200 Bedienungsanleitung

RedMax

RedMax BT17 Bedienungsanleitung

Parkside

Parkside PHSL 900 A3 Bedienungsanleitung

Gardeo

Gardeo PRO GPTHT2560 Bedienungsanleitung

Park

Park DT-810870 Bedienungsanleitung

Worx

Worx WG209 Bedienungsanleitung

Gardenline

Gardenline 43671/HTKS26 Bedienungsanleitung

Makita

Makita 3710 Bedienungsanleitung

Champion

Champion 100683 Bedienungsanleitung

Stihl

Stihl FS 311 Bedienungsanleitung

Efco

Efco STARK 38 Handbuch

Fieldmann

Fieldmann FZS 1001-A Bedienungsanleitung