echoflex Wireless TimeClock Bedienungsanleitung
Part Number: 8188M1430-1.0.0 Rev: A
Released: 2021-07
Wireless TimeClock
Configuration Guide
Version 1.0
Table of Contents
Table of Contents i
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Document Conventions. . . . . . . . . . . . . . . . . . 2
Help from Technical Services. . . . . . . . . . . . . . 3
Technical Services Department . . . . . . . . . 3
Installation . . . . . . . . . . . . . . . . . . . . . . . . 4
Prepare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connect the Wiring . . . . . . . . . . . . . . . . . . . . . 5
Install the Station. . . . . . . . . . . . . . . . . . . . . . . 6
Attach the Faceplate . . . . . . . . . . . . . . . . . . . . 6
Replace the Battery . . . . . . . . . . . . . . . . . . . . . 7
User Interface . . . . . . . . . . . . . . . . . . . . . . 8
Keypad Navigation . . . . . . . . . . . . . . . . . . . . . 8
Home Screen . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Getting Started . . . . . . . . . . . . . . . . . . . . 9
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Organize. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Link and Configure . . . . . . . . . . . . . . . . . . . . 10
Main Menu . . . . . . . . . . . . . . . . . . . . . . . 11
Schedule Events . . . . . . . . . . . . . . . . . . . . . . . 11
Manual Override . . . . . . . . . . . . . . . . . . . 12
Schedule an Event . . . . . . . . . . . . . . . . . . 12
ii Table of Contents
TimeClock Settings . . . . . . . . . . . . . . . . . 14
Set Current Time. . . . . . . . . . . . . . . . . . . . . . . 15
Set Time Style . . . . . . . . . . . . . . . . . . . . . . . . . 15
Set Current Date. . . . . . . . . . . . . . . . . . . . . . . 15
Set Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . 15
Set Latitude and Longitude . . . . . . . . . . . . . . 15
Set Daylight Saving Time . . . . . . . . . . . . . . . . 16
Set Manual DST Dates . . . . . . . . . . . . . . . . . . 16
Set Sweep Interval . . . . . . . . . . . . . . . . . . . . . 16
Set Timed Hold . . . . . . . . . . . . . . . . . . . . . . . . 17
Set Flick Warn . . . . . . . . . . . . . . . . . . . . . . . . . 17
Show Seconds . . . . . . . . . . . . . . . . . . . . . . . . . 17
Restore Defaults . . . . . . . . . . . . . . . . . . . . . . . 17
Holiday Shut-Off . . . . . . . . . . . . . . . . . . 18
Configure Holiday Groups . . . . . . . . . . . . . . . 18
Set Holiday Shut-Off Duration . . . . . . . . . . . 18
Manage Controllers . . . . . . . . . . . . . . . . 19
Link or UnLink . . . . . . . . . . . . . . . . . . . . . . . . 19
Linked Controllers . . . . . . . . . . . . . . . . . . . . . 19
Configure Controller. . . . . . . . . . . . . . . . . 19
Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Timed Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Indefinite Hold . . . . . . . . . . . . . . . . . . . . . . . . 21
Table of Contents iii
Recall Preset . . . . . . . . . . . . . . . . . . . . . . 21
Menu Structure . . . . . . . . . . . . . . . . . . . 22
Numbered Elements . . . . . . . . . . . . . . . 23
Configured Scenes . . . . . . . . . . . . . . . . . . . . 23
Configured Events . . . . . . . . . . . . . . . . . . . . . 24
Configured Groups . . . . . . . . . . . . . . . . . . . . 25
Compliance . . . . . . . . . . . . . . . . . . . . . . . 26
FCC Compliance . . . . . . . . . . . . . . . . . . . . 26
ISED Compliance. . . . . . . . . . . . . . . . . . . . 26
Conformité ISDE . . . . . . . . . . . . . . . . . . . . 26
1Wireless TimeClock Configuration Guide
Overview
The Wireless TimeClock (WTC) provides effortless time-based control for your
Echoflex solution.
Its comprehensive event scheduling capabilities, powerful grouping features,
and masking logic maximize energy efficiency to meet Title 24, IECC, and
ASHRAE-90.1 energy requirements.
The six-button user interface and large back-lit display allow for simple setup
and operation.
This guide describes the procedures to install and configure the WTC for use
with linked devices that are part of an Echoflex solution. The product package
includes the TimeClock, 24 V power pigtail, a battery, four screws, eight
receptacle spacers, and two WAGO®connectors.
Features
• Create and control 15 different Scenes for up to 24 Groups
• Schedule up to 50 Events across 24 separate Groups
• Link and Group up to 20 controllers
• Meets California Title 24, IECC, and ASHRAE 90.1 requirements
• Astronomical timeclock schedule with before/after sunset or sunrise
calculation based on latitude/longitude settings
• 24-hour real-time clock with user configurable Daylight Saving Time
• Four recurrence settings: every day, weekdays, weekends, day of week
• Hold feature suspends scheduled Events for up to two hours
• Simple manual control of Scenes with overrides
• Resumes program automatically after power loss
Note:
Grouping controllers and editing the default lighting
levels that create Scenes are features that can only be
configured during pre-commissioning or with Garibaldi
Pro software. Contact Echoflex for more information.
Wireless TimeClock Configuration Guide 2
• Backlit graphical LCD display
• Mounts in industry-standard two-gang electrical box
Document Conventions
Echoflex's user documentation is designed for print or electronic use.
Cross-references highlighted in this document are links to the referenced
section of the guide.
Configuration parameters are emphasized in italics. Switch actions (ON/OFF)
and relay events (lights ON/OFF) are written in ALL CAPS. Button names
appear in [Brackets] and key terms in the interface appear in Bold.
This guide uses the following conventions to alert you to danger or important
information. Please email comments about this guide to:
TechComm@etcconnect.com.
Note:
Notes are helpful hints and information that is
supplemental to the main text.
CAUTION:
A Caution statement indicates situations where there
may be undefined or unwanted consequences of an
action, potential for data loss or an equipment problem.
WARNING:
A Warning statement indicates situations where
damage may occur, people may be harmed, or there
are serious or dangerous consequences of an
action.
WARNING:
RISK OF ELECTRIC SHOCK! This warning statement
indicates situations where there is a risk of electric
shock.
3Wireless TimeClock Configuration Guide
Help from Technical Services
If you are having difficulties that are not addressed by this document, contact
Echoflex support at service@echoflexsolutions.com or the main website at
echoflexsolutions.com. If none of these resources are sufficient, contact
Technical Services directly at the office identified below.
When calling for help, take these steps first:
• Prepare a detailed description of the problem
• Be near the equipment for troubleshooting
• Find your notification number if you have called in previously
Technical Services Department
3031 Pleasant View Road
Middleton, WI 53562
800-775-4382 (USA, toll-free)
+1-608 831-4116
service@echoflexsolutions.com
Wireless TimeClock Configuration Guide 4
Installation
Prepare
To ensure optimal function, consider the installation environment and the
following guidelines:
• For indoor use only. Operating temperature 0°C–40°C (32°F–104°F),
5% to 95% relative humidity (non-condensing).
• High density construction materials and large metal appliances or
fixtures in the space may disrupt wireless reception.
• Install the WTC within range of linked lighting controllers, 24 m (80 ft)
unobstructed view. Consider adding a repeater to extend the wireless
signal, if required.
• External antenna options include extension cables and a magnet-mount
antenna for installation locations with poor wireless reception.
• Can be surface-mounted or flush-mounted in an industry standard
two-gang electrical box (not provided). The box must be installed plumb
and square. Ensure it is clean and free of obstructions to accommodate
the cable if using an external antenna.
• Provide a 24 V power supply connection to the target two-gang
electrical box.
• Pull the plastic tab to activate the installed CR2032 battery. The battery
is not required to run the WTC, it is only used to maintain the time in
case of a power outage.
Note:
Installation must follow all national and local codes for
electrical equipment.
Note:
An External Antenna Extension Kit is sold separately
through Echoflex, part number 8186K1001. Contact
Echoflex for more information.
5Wireless TimeClock Configuration Guide
Connect the Wiring
The WTC ships with a 24 V power terminal strip with wire pigtail, spacers, and
all required screws and connectors for the installation.
The antenna jumper is set to use the internal whip antenna by default, position
2 and 3. If your installation uses the external antenna option, adjust the
jumper position to 1 and 2 (move it left).
1. Pull the two 24 V power supply wires into the electrical box and strip
11 mm (7/16 in) of insulation.
2. Strip 11 mm (7/16 in) of insulation from both the red and black pigtail
wires.
3. Use the WAGO connectors provided to connect the power pigtail and the
power supply output wires. Use one WAGO for the red wire (positive +)
and one for the black wire (negative -). Open the terminal levers on the
WAGO connector and insert the power supply wire and the lead from the
pigtail into the terminals, then close the levers. Tug the wires to ensure
they are secure.
4. Connect the two-pin connector to the power pigtail receptacle on the
station.
5. If using the external antenna option, connect the patch cable to the
RP-SMA connector port. Ensure the jumper is set to position 1 and 2.
Note:
If using the External Antenna Extension kit, the
connection for the flexible coaxial patch cable (part
number N1124) may be outside the electrical box.
24 V power pigtail
receptacle
RP-SMA connector
port for external
antenna
Jumper setting
for antenna
Internal whip
antenna
Inhaltsverzeichnis
Andere echoflex Hausautomation Handbücher
