Ecleris PROCAM HD Bedienungsanleitung

USER MANUAL

PROCAM HD

CAMERA AND POWER SUPPLY

ABOUT THIS MANUAL

Version: 2023.07

Year: 2023

Language: English

All the rights to this manual are reserved, especially reproduction, publication and translation rights. No portion of this manual may be

reproduced by no means (photocopy, microfilm or other methods) without previous written authorization from ECLERIS. Neither can it

be reproduced, multiplied or published through any electronic data processing form.

The information contained in this manual may be modified or broaden without previous notification, without it representing any

responsibility to ECLERIS.

ECLERIS USA

11801 NW 100th Rd

Suite 17

Medley, FL 33178, U.S.A.

Phone: +1 786 483 7490

CMC Medical Devices & Drugs S.L.

C/HoracioLengo Nº18, CP29006,Málaga-

Spain

info@cmcmedicaldevices.com

USER MANUAL –PROCAM HD II 
 
Página 2de 44 
INMANUUML043 USER M.M. USO PROCAM HD II V.2023.07 ENGESP US 
TABLE OF CONTENTS 
SYMBOLS........................................................................................................................................... 3 
SAFETY INFORMATION.................................................................................................................... 4 
DESCRIPTION ................................................................................................................................... 5 
1 INTENDED USE ............................................................................................................................. 5 
2 INTENDED USER........................................................................................................................... 5 
4 COMPONENTS .............................................................................................................................. 6 
4.1 CONSOLE............................................................................................................................... 6 
4.2 PROCAM CAMERA ...................................................................................................................... 9 
4.2.1 VI360 R01 y R02 ........................................................................................................................ 9 
4.2.2 VI360 R03 OR LATER.............................................................................................................. 10 
INSTALLATION ................................................................................................................................ 10 
1 REVISION..................................................................................................................................... 10 
OPERATION..................................................................................................................................... 11 
1 CONSOLE FUNCTIONS .............................................................................................................. 11 
1.1 WHITE BALANCE................................................................................................................. 11 
1.2 SPECIALTY SELECTION FUNCTION ................................................................................. 11 
1.3 USB port................................................................................................................................ 12 
1.4 TAKE A PICTURE FUNCTION............................................................................................. 12 
1.5 RECORD VIDEO FUNCTION............................................................................................... 12 
1.6 ADVANCED MENU FUNCTION........................................................................................... 12 
1.6.1 ADVANCED MENU FOR HC120G2/1 R01 and VI360 R00............................................. 13 
1.6.2 ADVANCED MENU FOR HC120G2/1 R02 OR LATER and VI360 R01 OR LATER....... 14 
2 CAMERA FUNCTIONS................................................................................................................. 15 
2.1 ZOOM FUNCTION................................................................................................................ 15 
2.2 BRIGHTNESS FUNCTION ................................................................................................... 15 
2.3 PHOTO FUNCTION.............................................................................................................. 15 
MAINTENANCE................................................................................................................................ 15 
1 CLEANING.................................................................................................................................... 16 
1.1 EXTERNAL SURFACE ......................................................................................................... 16 
2 ELECTRICAL CONNECTIONS .................................................................................................... 16 
3 CHANGING THE FUSE................................................................................................................ 16 
TECHNICAL SPECIFICATIONS ...................................................................................................... 17 
1 DIMMENSIONS OF HC120G2/1 R01....................................................................................... 18 
2 DIMMENSIONS OF HC120G2/1 R02 AND R03...................................................................... 19 
3 DIMMENSIONS OF HC120G2/1 R04 OR LATER ................................................................... 19 
TROUBLESHOOTING...................................................................................................................... 19 
TECHNICAL SERVICE..................................................................................................................... 21 
WARRANTY.................................................................................................................................. 22 

USER MANUAL –PROCAM HD II

Página 3de 44

INMANUUML043 USER M.M. USO PROCAM HD II V.2023.07 ENGESP US

1. SYMBOLS

Read the related documentation

CE Mark

Serial Number

Manufacturer information

(Name, Address)

Warning

Caution

Alternate current

Applicable Part Type B

Keep dry and protected from humidity

Do not discard with the

household waste

This side up

Protective ground

Temperature limits

Equipotentiality

Pressure limits

Date of Manufacture

(MM/YYYY).

Humidity limits

Product Code

Video camera connection

Fragile

Freeze Image function/ Take a picture

function

Video output

White Balance function

Fuse

Specialty Selection function

Zoom

Menu function

Brightness / Gain function

Record video function

Photo

USB port

EU Authorized Representative

USER MANUAL –PROCAM HD II

Página 4de 44

INMANUUML043 USER M.M. USO PROCAM HD II V.2023.07 ENGESP US

2. SAFETY INFORMATION

This manual contains all the relevant information on the appropriate care and handling ofthe device

while on operation, as well as information about its accessories.

This symbol shall be used in the manual to indicate information that includes important

warnings or precautions.

Read this manual carefully before using the device.

Should you have any doubt regarding thecontents of the manual herein, or the operation and safety

of the device, please contact your local distributor or the nearest ECLERIS office.

ECLERIS will not be held responsible for damage that can occur to the equipment due to not

following the instructions or not observing the following criteria:

Keep the equipment out of children reach

Do not install the equipment next to heat sources, such as heaters.

Install the equipment on a firm horizontal surface, in a well-ventilated area.

Protect the equipment and accessories from direct solar light, dust, humidity and vibrations

or excessive banging.

Equipment not appropriate to be used near or around flammable anesthetic mixture with air,

oxygen or nitrous oxide.

The equipment does not need sterilization.

Do not put any container with liquids on top of the device.

Main power cord cable are resistant to deformations and mechanical tensions however do

not damage or avoid violent shocks to the cables.

Do not use the equipment during electrical storms.

Unplug the equipment when it is not being used.

This equipment has to be connected to ground through a ground conductor in the power

cable. This ground connection is essential for the safe use of the equipment.

Do not connect the equipment to devices that do not complywith IEC60601-1ed 3.0 or later.

The device is provided with a disconnectable power cable that assures proper electrical

isolation. If it needs to be replaced, the replacement should have the same features:

3x0.75mm2.

In case of interference with other electro medical or electric equipment, we recommend

increasing the distance between PROCAM HD and the other equipment to minimize these

effects.

Do not open the equipment. Maintenance and repairs must be done by ECLERIS or an

authorized company. ECLERIS will not be responsible for the consequences of repairs or

maintenance carried out by non-authorized personal.

USER MANUAL –PROCAM HD II

Página 5de 44

INMANUUML043 USER M.M. USO PROCAM HD II V.2023.07 ENGESP US

In case of any problem, disconnect the power cable.

The equipment should only be used by personnel who are informed of the above warnings.

This instruction manual must be kept together with the equipment for future reference. If the

equipment should be sold or donated this manual must be enclosed.

Any use outside of the manufacturer specific intent use, will exclude ECLERIS of all liability.

If by any of the following:

Inadequate use of the equipment.

Failure to use the instruction manual.

Bad maintenance and care of the equipment.

Repair or manipulation by unauthorized personal.

…personal or material damage is produced to a third party, ECLERIS, the manufacturer and sales

agent of this equipment, will not assume reasonability for said damage.

The device should never be discarded with the household waste. Please check local

regulations for electronic components disposal or recycling. It is the user’s

responsibility to deliver the system to the proper location for disposal or recycle of

electrical and electronic device.

3. DESCRIPTION

3.1 INTENDED USE

The device is intended for use in all types of diagnoses and surgeries that require real-time capture

of high sharpness and contrast images, without being exclusive stereoscopy as a conditioning

technique.

3.2 INTENDED USER

The device is intended for use by physician, paramedic or health care professional.

3.3 DESCRIPTION AND FEATURES

PROCAM HD camera has a 1/3” high resolution CMOS chip in one control unit

The CMOS chip, is located in the front of the camera head, it takes the image and converts it to

electronic signals. Theimageis processed in the control unit and provides an HDMI (High Definition

Multimedia Interface) in the back panel to be either projected on a LCD monitor or other digital

visualization devices. Also CVBS, DVI and VGA or SDI outputs are available (according to the

device version).

The PROCAM HD camera provides images with great sharpness, clarity and depth of perception

with excellent color reproduction. It has a compact and ergonomic design plus is light weight

therefore is very comfortable to use.

The camera has several controls that allow you to select, by single buttons, different functions as

Brightness and Zoom.

USER MANUAL –PROCAM HD II

Página 6de 44

INMANUUML043 USER M.M. USO PROCAM HD II V.2023.07 ENGESP US

PROCAM HD power supply (console) was specifically designed to be used together with High

Definition cameras from Ecleris. The console gives power to the videocamera which process the

video. Up to two high resolutions imaging devices can be connected.

The front panel provides buttons for the functions: SPECIALTY SELECTION, WHITE BALANCE,

TAKE A PICTURE and RECORD VIDEO. Also, provides an USB port for data storage. The

rear panel provides buttons for the functions: ADVANCED MENU and SELECT*

*Functions vary according to the device version

3.4 COMPONENTS

PROCAM HD includes the following components. Check and identify them before proceeding to

the installation:

Console (unit main)

HD videocamera (handheld)

Power cord

HDMI cord

Use video monitors certified under IEC60601.

Use the endoscope in accordance with IEC60601-2-18.

3.4.1 CONSOLE

3.4.1.1 REAR PANEL

3.4.1.1.1 HC120G2 R01

1. Power connector

2. Fuse holders

3. VGA video output connector

4. Video output in high definition (HDMI

output connectors)

5. DVI video output connector

6. CVBS video output connector

USER MANUAL –PROCAM HD II

Página 7de 44

INMANUUML043 USER M.M. USO PROCAM HD II V.2023.07 ENGESP US

7. Equal-potential terminal

3.4.1.1.2 HC120G2/1 R02 and R03

1. Power connector

2. Fuse holders

3. SDI video output connector

4. CVBS video output connector

5. DVI video output connector

6. HDMI video output connector

7. Service

8. Equal-potential terminal

3.4.1.1.3 HC120G2/1 R04 OR LATER

USER MANUAL –PROCAM HD II

Página 8de 44

INMANUUML043 USER M.M. USO PROCAM HD II V.2023.07 ENGESP US

1. SDI video output connector

2. CVBS video output connector

3. DVI video output connector

4. HDMI video output connector

5. Service

6. Equial-potential terminal

7. ADVACED MENU function

8. SELECT function

9. Power connection

10.

3.4.1.2 FRONT PANEL

3.4.1.2.1 HC120G2 R01, R02 and R03

USER MANUAL –PROCAM HD II

Página 9de 44

INMANUUML043 USER M.M. USO PROCAM HD II V.2023.07 ENGESP US

1. Videocamera connector

2. SPECIALTY SELECTION function

3. FREEZE function

4. WHITE BALANCE function

5. ADVANCED MENU function

6. ON/OFF button

3.4.1.2.2 HC120G2/1 R04 OR LATER

1. Videocamera connector

5. USB port

2. SPECIALTY SELECTION function

6. TAKE PICTURE function

3. WHITE BALANCE function

7. ON/OFF button

4. RECORD VIDEO function

3.4.2 PROCAM CAMERA

3.4.2.1 VI360 R01 y R02

1. Zoom Button

2. Brightness Button

MANUAL DE USUARIO –PROCAM HD II

Página 10 de 44

INMANUUML043 USER M.M. USO PROCAM HD II V.2023.07 ENGESP US

3.4.2.2 VI360 R03 OR LATER

1. Photo Button

2. Zoom Button

3. Brightness Button

4. INSTALLATION

The connection and revision of the equipment must be carried out by technical personnel

with knowledge of the electrical installation from where the equipment will be powered.

1. Carefully unpack the equipment.

2. Place the PROCAM HD console on a solid surface.

3. If thebuilding structurehas equipotential grounding, connect the equipment to ground through

the equipotential ground terminal located on the rear panel of the unit.

4. Connect the connector of the video camera ECLERIS to the connector in the front panel.

5. Plug the video output connector on the rear panel of the PROCAM HD console to the video

input of the video monitor.

Note: PROCAM HD supports all the video outputs to multiple devices simultaneously.

Check if the image device (videomonitor / video printer / LCD TV / …) supports the camera

resolutions (1080p @ 60Hz / 1920x1080 @ 60 fps).

6. Connect the optical device with C screw to the camera.

7. With the equipment off, connect power cable to the electrical socket.

4.1 REVISION

Once the installation is complete and before turning on the PROCAM HDcamera we recommend to

do the following controls:

•Verify that the electrical circuit is connected to ground and in perfect condition and that the

connection to the equipment is done perfectly too.

•Confirm that the power supply fuses are in the socket and that it is suitable.

•Make sure no water or liquid supplies, or gases or inflammable fumes in the environment are

near the equipment that can harm it.

•The equipment has to be connected to the electrical socket through the power cable supplied

by ECLERIS.

•The electrical supply has to be done at electrical socket without power adapters.

The equipment must be used only in places where the electrical installation complies with

local regulations.

Andere Handbücher für PROCAM HD

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung