3
••
Bundle cables and harnesses with electrical tape
or wire ties to prevent them from interfering with
moving parts. If they should entangle with the
steering wheel, shift lever or brake pedal, an
accident may result.
••
Do not disassemble or rebuild this product.
Doing so may cause an accident, fire or
electrical shock.
••
If an abnormal situation occurs, such as foreign
matter entering or liquid splashing on the
product, or smoke or a strange odor emitting
from the unit, shut off the product immediately
and consult the dealer from whom you
purchased it. Continued operation may cause an
accident, fire or electrical shock.
••
Do not install this product in locations where it
may obstruct the driver's view, or where it may
endanger passengers in the vehicle. Otherwise,
an accident or injury may result.
••If using a drill to make holes, wear protective
goggles to protect your eyes, otherwise debris
may get into your eyes and cause injury or
blindness.
••
This unit is intended for operation in DC 12volt,
negative-grounded vehicles only. Never use it in
24- volt vehicles such as heavy trucks or diesel
vehicles with cold-region specifications.
••
Do not install this product in locations where it
may interfere with the operation of the steering
wheel, shift lever, brake pedal, etc. Otherwise,
an accident or injury may result.
••
To prevent damage to the vehicle, confirm the
locations of hoses, electrical wiring, and the fuel
tank prior to drilling holes to install this product.
Also, take care so that the product does not
interfere and/or not come in contact with them.
Otherwise, a fire may result.
••
When using an existing nut and/or bolt from the
vehicle to ground this product, do not use any
that secure parts of the steering or braking
systems. Otherwise, an accident may result.
••
Be sure to disconnect the negative terminal of
the vehicle's battery before prior to any
installation work. If you do not do this, the
positive and negative circuit may become
shorted and electric shocks or injury may result.
••
Specialized training and experience is required
in order to install and connect the camera. To
ensure safety, ask the place of purchase to
provide any installation and connection work. If
the unit is connected incorrectly, serious damage
to the vehicle may result.
••
When installing this product, be sure to use the
supplied mounting hardware. If parts other than
those supplied are used, the unit may be
damaged internally, or may not be held in place
securely and become dislodged.
••
Avoid installing the camera in places where it
cannot be installed securely or may be subjected
to excessive vibration. If this is not observed, the
camera may fall off and cause traffic accidents
and injury.
••
Connect the camera according to the instructions
given in this manual. If the camera is not
connected correctly, fire or other accidents may
result.
••
Be careful not to allow the cable to touch
threaded parts of the camera and moving parts
such as seat rails when routing them, otherwise
the cable may become damaged and short-
circuits may occur which could result in fire,
electric shocks or other accidents.
••
Do not allow the cable to touch metallic objects
when routing it. If it touches metallic objects, they
may become damaged and fire or electric
shocks may result.
••
Keep the cable away from hot objects when
routing them. If the cable touches hot parts of the
vehicle, the insulation may melt and cause short-
circuits, which could result in fire or electric
shocks.
••
If changing the installation location of the
camera, ask the place of purchase in order to
ensure safe operation. Removing and installing
the camera requires specialized skills.
••
The camera cannot be used for any purpose
other than as a vehicle-mounted camera.
Incorrect use of the camera may result in electric
shocks or injury.
••
The purpose of this camera is to enable the
driver to check behind the vehicle at times such
as when reversing the vehicle or parking it. It
should not be used for any other purpose.
••
Always be sure to check that the surrounding
area is safe when reversing the vehicle.
