ECS P6BAT-B Bedienungsanleitung
Important Information
Copyright
This publication, including all photographs, illustrations and software, is
protected under international copyright laws, with all rights reserved.
Neither this manual, nor any of the material contained herein, may be
reproduced without the express written consent of the manufacturer.
Disclaimer
The information in this document is subject to change without notice.
The manufacturer makes no representations or warranties with respect
to the contents hereof and specifically disclaims any implied warranties
of merchantability or fitness for any particular purpose. Further, the
manufacturer reserves the right to revise this publication and to make
changes from time to time in the content hereof without obligation of the
manufacturer to notify any person of such revision or changes.
Trademark Recognition
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft
Corp.
MMX, Pentium, Pentium-II, Pentium-III, Celeron are registered
trademarks of Intel Corporation.
VGA, OS/2, PS/2 are registered trademarks of International Business
Machines.
AMD, K5, K6 are registered trademarks of Advanced Micro Devices Inc.
Cyrix, M1 are registered trademarks of Cyrix Corporation.
Other product names used in this manual are the properties of their
respective owners and are acknowledged.
Version 1.5
Contents
Chapter 1: Introduction.............................................. 1
Welcome....................................................................... 1
About the Manual.......................................................... 2
Checklist ....................................................................... 3
Standard Items------------------------------------------------- 3
Recommendations........................................................ 3
Features........................................................................ 4
Chapter 2: Installation................................................ 7
Quick Installation Table ................................................ 7
Quick Jumper Setting Reference ................................. 8
Before You Begin.......................................................... 10
Static Electricity------------------------------------------------ 10
Choosing a Case---------------------------------------------- 10
How to Set Jumpers ------------------------------------------ 11
Preparing the Mainboard .............................................. 12
Mainboard Guide---------------------------------------------- 12
Check the Jumper Settings --------------------------------- 14
Install the Mainboard in the Case................................. 17
Connecting Power, Chassis Fans, and Panel---------- 19
Install Other Hardware.................................................. 21
Install the Processor------------------------------------------ 21
Installing a Slot1 Processor--------------------------------- 23
Installing a Socket-370 Processor ------------------------ 25
Install the Memory Modules -------------------------------- 27
Install a Hard Disk Drive and CD-ROM/DVD----------- 28
Installing a Floppy Diskette Drive ------------------------- 31
Using the Expansion Slots ---------------------------------- 32
Add-in Card Options------------------------------------------ 34
Install Extension Brackets and Modules----------------- 35
Chapter 3: Setup ......................................................... 41
About the Setup Utility .................................................. 41
Starting the Setup Utility -------------------------------------41
How to Flash a New BIOS-----------------------------------43
Standard CMOS Setup Option ..................................... 44
BIOS & CPU Features Setup Option............................ 45
Chipset Features Option............................................... 48
Power Management Setup Option ............................... 50
PNP/PCI Configuration Option ..................................... 53
Load BIOS Defaults Option .......................................... 54
Load Optimum Settings ................................................ 54
Integrated Peripherals Option....................................... 55
Supervisor and User Password Settings...................... 57
IDE HDD Auto Detection Option................................... 57
Save And Exit Setup Option ......................................... 58
Exit Without Saving Option........................................... 58
Chapter 4: Software.................................................... 59
About the Software ....................................................... 59
Folders for this Mainboard............................................ 59
Running the Support CD-ROM..................................... 61
Utility Folder Installation Notes ..................................... 61
CMI8X38 Folder Installation Notes............................... 62
Audio Software -------------------------------------------------62
Modem Driver and Software --------------------------------63
VIA Folder Installation Notes ........................................ 63
Mainboard (KOB 693 DCS) Installation Notes ............. 64
Appendix 1: Quick Jumper Setting Reference ........ 65
C
Ch
ha
ap
pt
te
er
r
1
1:
:
I
In
nt
tr
ro
od
du
uc
ct
ti
io
on
n
Welcome
Congratulations on purchasing the KOB 693 DCS mainboard. The
mainboard includes a Slot1 processor slot and a FC-PGA (Flip-Chip
Plastic Pin Grid Array) Socket-370 processor socket. This feature
means that you can install the mainboard with a Pentium-II or
Pentium-III cartridge, the SEPP (Single Edge Processor Package)
Celeron cartridge, or one of the new generation PGA Celeron or FC-
PGA Coppermine processors.
The KOB 693 DCS is a baby-AT sized mainboard that uses 4-layer
printed circuit board and measures 22cm x 22cm. The mainboard
features the VIA Apollo Pro Plus chipset. The KOB 693 DCS has a slot1
and a socket-370 so that it can be installed with either a slot1 processor
(SEPP Celeron, Pentium-II, Pentium-III) or a socket-370 processor (PGA
Celeron/FC-PGA Coppermine processor). The mainboard includes an
integrated audio system and a plug-in fax/modem module. The board
has an AGP slot for a graphics adapter, three PCI slots and one legacy
ISA slot. The mainboard has power connectors for both ATX and AT
power supplies, so that it can be installed in practically any kind of PC
case.
1
This chapter contains the following information:
About the Manual explains how the information in this manual is
organized
Checklist comprises a list of the standard and optional components
that are shipped with this mainboard
Recommendations lists some Do’s and Don’ts from the
manufacturer to help ensure reliability and performance from this
product
Features highlights the functions and components that make this
one of the best value mainboards on the market
About the Manual
The manual consists of the following chapters:
Introduction
Use the Introduction Chapter to learn about the features of the
mainboard, and the checklist of items that are shipped with the package.
Installation
Use the Installation Chapter to learn how to install the mainboard and
get your system up and running.
Setup
Use the Setup Chapter to configure the mainboard for optimum
performance.
Software
Use the Software Chapter to learn how to use the software drivers and
support programs that are provided with this mainboard.
2
Checklist
Compare the contents of your mainboard package with the standard
checklist below. If any item is missing or appears damaged, please
contact the vendor of your mainboard package.
Standard Items
1 x KOB 693 DCS Mainboard
1 x Cable/Bracket Pack
Diskette drive ribbon cable
IDE drive ribbon cable
Parallel port extension bracket
Serial ports extension bracket
Audio ports extension bracket
This User’s Manual
Software Support CD-ROM Disc
Optional Items
ATX Form Bracket (2 USB ports, IR port, PS/2 mouse port)
Digital audio extension bracket
V.90 Fax/modem module
Recommendations
This mainboard automatically determines the CPU clock frequency and
system bus frequency for the kind of processor that you install. You may
be able to change these automatic settings by making changes to
jumpers on the mainboard, or changing the settings in the system setup
utility. We strongly recommend that you do not overclock the mainboard
to run processors or other components faster than their rated speed.
Overclocking components can adversely affect the reliability of the
system and introduce errors into your system. Overclocking can
permanently damage the mainboard by generating excess heat in
components that are run beyond the rated limits.
Components on this mainboard can be damaged by discharges of static
electricity. Handle the board carefully holding it by the edges. Don’t flex
3
or stress the circuit board. Keep the board in its static-proof packing until
you are ready to install it. Follow the static guidelines given at the
beginning of Chapter 2.
Features
The key features of this mainboard are the wide range of processors that
can be installed, and the support for both AT and ATX power supplies.
Wide Choice of Processors
This mainboard provides an excellent platform for an inexpensive value
PC that is internet-ready thanks to the fax/modem module. The socket-
370 can be installed with a PGA Celeron or FC-PGA Coppermine
processor. The PGA Celeron has 32k of internal cache memory, 128K of
external cache memory, and operates over a 66 MHz system bus. The
PGA Celeron ships with clock speeds running from 300 MHz through to
533 MHz. The FC-PGA Coppermine operates over a 100 MHz system
bus. The FC-PGA Coppermine ships with clock speeds running from 500
MHz through to 750 MHz.
The PGA Celeron and FC-PGA Coppermine processors are the ideal
choice for an entry-level PC.
For better performance, the KOB 693 DCS can be installed with a slot1
processor. The SEPP (Single Edge Processor Package) Celeron is the
least expensive slot-1 processor. It has 32K of internal cache memory,
128K of external cache memory (except for older versions), and
operates over a 66 MHz system bus. SEPP Celerons ship with clock
speeds ranging from 266 MHz through to 533 MHz.
For higher-performance business-class computing, the slot1 can be
installed with a Pentium-II or Pentium-III processor cartridge. The
Pentium-II and Pentium-III have 32K of internal cache memory and 512K
of external cache memory. They operate over a 100 MHz system bus
(except for older Pentium II versions). The Pentium-III includes new
instructions that are designed to enhance multimedia/internet computing
by providing rapid encoding and decoding of the compressed audio and
video files which are pervasive in the internet environment. The Pentium-
II ships with clock speeds running from 233 MHz through to 450 MHz.
The Pentium-III ships with clock speeds of 450 MHz, up to 750 MHz, and
higher.
4
VIA Apollo Pro Plus Chipset
The VIA Apollo Pro Plus chipset is a high performance chipset that
ensures full support for Intel’s Slot1 and socket-370 processors. The
chipset supports 66 MHz and 100 MHz front side buses and SDRAM
memory installation of up to 768 MB. Support is provided for a 2x AGP
slot and two PCI IDE channels with Ultra DMA 33. The chipset is
compliant with the PC98/99 specifications.
Inexpensive Memory
The board has three DIMM sockets for the installation of 168-pin, 3.3V
non-buffered DIMM memory modules. The DIMM memory modules must
be installed with SDRAM memory chips. The board supports a memory
bus of 66 MHz or 100 MHz, so you can choose between inexpensive 66
MHz memory modules or high-performance PC-100 memory modules.
Each installed memory module can be populated with 8 MB up to 256
MB of memory, so a maximum total of 768 MB memory can be installed.
Highly Integrated Design
The ITE LPC I/O controller handles the mainboard’s I/O functions. The
CMI 8738/PCI C3DX is a two-chip solution that provides an integrated
audio and fax/modem system.
Built-in PCI 3D Sound
The system includes built-in PCI 3D audio support. The chip provides
Sound Blaster 16-bit-compatible audio, plus support for Microsoft’s
DirectSound 3D specification and Aureal A3D interface. The sound ports
include jacks for speakers, microphone and stereo in, and a game/MIDI
port. The audio system supports full duplex operation and drivers are
available for WIN 95/98 and WIN NT 4.0. The audio system can output
sound to 4 loudspeakers and also supports SPDIF 24-bit digital sound
input and output.
Built-in V.90 Fax/modem
The mainboard includes an integrated fax/modem. The fax/modem
supports 56 Kbps transmission using the V.90 protocol. The fax/modem
is integrated with the built-in audio system to support voice as well as
data transmissions. You must install a fax/modem module (with line and
telephone sockets) in order to use the integrated fax/modem.
Expansion Options
The board has plenty of expansion potential with one 2x AGP slot for an
AGP graphics adapter, three 32-bit PCI slots, and one legacy 8/16-bit
5
ISA slot. The ISA slot is shared with one of the PCI slots which means
that you can use either one of the slots but not both at the same time.
Integrated I/O
Using the ITE LPC I/O chip and the VIA Apollo Pro Plus chipset, the
board has a comprehensive set of integrated I/O ports. The I/O ports are
installed as connectors on the mainboard and can be installed on the
system case using extension brackets. The I/O ports include one PS/2
mouse port, a parallel port, two USB ports, and an infrared port. The
mainboard includes connections for floppy diskette drives and two PCI
IDE channels.
Keyboard Power On Feature
Using the system BIOS setup program, you can configure the system to
turn on using a keyboard-typed password. A green keyboard is not
required.
Hardware Monitoring
The system supports hardware monitoring so that monitoring software
applications can generate warnings if critical parameters, such as
voltages and temperatures, are exceeded
Programmable Firmware
The mainboard includes Award BIOS, which allows BIOS setting of CPU
parameters. The fully programmable firmware enhances the system
features and allows users to set power management, CPU and memory
timing, LAN and modem wake-up alarms, and so on. The firmware can
also be used to set parameters for different Celeron processor clock
speeds so that you don’t need to change mainboard jumpers and
switches.
6
C
Ch
ha
ap
pt
te
er
r
2
2:
:
I
In
ns
st
ta
al
ll
la
at
ti
io
on
n
Quick Installation Table
This chapter explains how to successfully install the mainboard into a
computer case and build a working system. The installation procedure is
as follows:
Quick Jumper
Setting Reference
Provides a quick reference for the jumper
settings on this mainboard.
Before you Begin Provides advice on choosing a case,
avoiding static electricity damage, and setting
jumpers.
Preparing the
Mainboard
Provides a guide to the mainboard and I/O
port locations, full details on the jumper
settings, and advice on installing the
mainboard in the system case.
Install Other
Hardware
Provides guidance on installing essential
hardware: processor, memory, hard disk
drive, CD-ROM, floppy disk drive, and
expansion cards.
Make the External
Connections
Provides advice on using the external I/O
ports to install peripheral devices such as a
keyboard, a monitor, a mouse, a printer,
loudspeakers, and so on.
7
Inhaltsverzeichnis
Andere ECS Hauptplatine Handbücher
ECS
ECS H67H2-M4 Bedienungsanleitung
ECS
ECS RS482-M Bedienungsanleitung
ECS
ECS 648FX-A2 V1.0 Bedienungsanleitung
ECS
ECS G43T-WM Bedienungsanleitung
ECS
ECS BAT-I2 Bedienungsanleitung
ECS
ECS L4IBMGL6 1.0 Bedienungsanleitung
ECS
ECS H61H2-M6 Bedienungsanleitung
ECS
ECS H61H2-M Bedienungsanleitung
ECS
ECS L7S7A2 Bedienungsanleitung
ECS
ECS A780GM-M3 Bedienungsanleitung
ECS
ECS H77H2-M4 Bedienungsanleitung
ECS
ECS H67H2-M2 Bedienungsanleitung
ECS
ECS H61H2-I3 Bedienungsanleitung
ECS
ECS 965PLT-A Bedienungsanleitung
ECS
ECS 756-A Bedienungsanleitung
ECS
ECS P6VPA2T Bedienungsanleitung
ECS
ECS A75F2-A2 V1.0 Bedienungsanleitung
ECS
ECS 661GX-M2 V5 Bedienungsanleitung
ECS
ECS P6VAA Bedienungsanleitung
ECS
ECS N2U400-A Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
