EDAC 222-02 Bedienungsanleitung

EDAC 222-02 AUTO ALARM DIALLER

INTRODUCTION .................................................................................................................1

NEW FEATURES ................................................................................................................2

SPECIFICATIONS...............................................................................................................3

INSTALLATION ..................................................................................................................5

Installation Requirements ..............................................................................................5

Jumper Settings .............................................................................................................8

HOW THE EDAC 222-02 WORKS – RUN MODE..............................................................9

Displays .........................................................................................................................9

Cancelling Alarm Notification Calls..............................................................................10

EXPLANATION OF PROMPTS – PROGRAMMING MODE............................................12

GETTING STARTED QUICKLY - EXAMPLE...................................................................13

Entering Programming Mode.......................................................................................13

Programming Telephone Numbers..............................................................................13

Recording Input Trigger one Voice Message ..............................................................14

Replaying the Recorded Message...............................................................................14

Exit to Run Mode .........................................................................................................15

Testing the EDAC 222-02............................................................................................15

HOW TO PROGRAM THE EDAC 222-02 ........................................................................16

Introduction ..................................................................................................................16

The *Key - Program Checking................................................................................16

Fixing Data Entry Errors...............................................................................................17

Programming the Functions for Individual Alarm Inputs..............................................17

Entering Programming Mode.......................................................................................18

What to do if you Forget your PIN Number..................................................................18

Exit to RUN Mode ........................................................................................................18

Restore Factory Defaults .............................................................................................19

Function F0* Recording Voice Messages ...............................................................20

Function F00 Modify PIN Number ...........................................................................22

Function F02 Call Progress.....................................................................................22

Function F03 Cancel Options When Making a Call to the EDAC 222-02...............23

Function F04 Answer Incoming Calls When any Input Active ................................24

Function F05 Answer Incoming Calls When all Inputs are Cancelled ....................24

Function F06 Answer Incoming Calls When no Inputs Active (Idle) .......................25

Function F07 Call List Priority & Rosters ................................................................26

Function F08 Outputs …………………………………………………………....27

Function F09 Trigger/Dial Time...............................................................................27

Function F10 Programming Your Pager Messages................................................27

Function F11 Programming Your Telephone/Pager Numbers................................28

Function F51 Setting Inputs to Trigger or Report....................................................30

Function F52 Physical Input Trigger Configuration .................................................31

Function F53 Wait Time Between Calls ..................................................................32

Function F54 Pager Delay Time..............................................................................32

Function F55 Message Play Time...........................................................................33

Function F56 Call Counter ......................................................................................34

MISCELLANEOUS FUNCTIONS .....................................................................................35

Function F96 Trigger/dial Mode ..............................................................................35

USING A PAGER WITH THE EDAC 222-02....................................................................36

ADVANCED FEATURES..................................................................................................37

Outputs ........................................................................................................................37

FREQUENTLY ASKED QUESTIONS ..............................................................................38

COMPLIANCE NOTES .....................................................................................................39

NOTICE TO AUSTRALIAN USERS ............................................................................39

NOTICE TO NEW ZEALAND USERS.........................................................................39

GLOSSARY.......................................................................................................................40

WARRANTY......................................................................................................................41

INTERNATIONAL CONTACT DETAILS ..........................................................................42

EDAC 222-02 AUTO ALARM DIALLER - 1 -

INTRODUCTION

The EDAC 222-02 is a cost-effective, auto reporting dialler designed for domestic and small-

business security monitoring, or for general purpose monitoring. The EDAC 222-02 is an effective

tool for alerting the user to events such as faults or changes in equipment state. It is physically

compact, consumes little power and can be installed very quickly. Its ease of programming

combined with simple installation make it highly attractive and cost effective in monitoring

applications.

The EDAC 222-02 is activated by a contact closure, or opening, which results in the start of a user

defined dialling sequence, followed by the transmission of either an 8-second voice message or 20

character pager message.

When an event triggers the auto-dialler, the EDAC 222-02 will make an alarm notification call. The

EDAC 222-02 will pick up the phone line and call a list of people via telephone, cell phone or

pager. The EDAC 222-02 speaks a pre-recorded voice message announcing the problem.

Upon receipt of an alarm call you may reset the EDAC 222-02 by simply pressing a numeric digit

on your telephone keypad or by entering a user-defined PIN number. This will stop the unit making

further alarm notification calls. Alternatively, the EDAC 222-02 may be interrogated by calling into it

and listening to the voice message. This provides the opportunity to cancel/acknowledge the alarm

Inputs via the telephone keypad. This option would normally be used when the EDAC 222-02 is

operating in conjunction with a pager.

Once the EDAC 222-02 is in a cancelled state, it will suspend its dialling sequence and remain

cancelled until the event that triggered the alarm has been removed (cleared). If the EDAC 222-02

does not receive acknowledgment of an alarm, it will remain in dialling mode until the event that

triggered the alarm is cleared, or the user-defined call count limit is reached.

All telephone numbers, messages, and functions are user programmable via a keypad and a single

character display.

The EDAC 222-02 has numerous programmable features that enable it to be a flexible telemetry

monitoring tool suitable for use in any situation. If you require information about the EDAC 222-02

and how it can be used with your monitoring application, please contact your supplier. For online

manuals for all EDAC products, use the EDAC web site

http://www.edacelectronics.com/support.html.

EDAC 222-02 AUTO ALARM DIALLER - 2 -

NEW FEATURES

If you have used products from the EDAC range in the past, you may be interested in the

improvements made to the new model.

I/O Status LEDs

Four LED lights have been added to the product to facilitate easy viewing of the state of the

I/Os. When an input LED is on, the corresponding input is low. When an input LED is off, the

corresponding input is in a high state. When an output LED is off the corresponding output is

on, and when an output LED is on the corresponding output is off.

Earth Discharge Circuit

The EDAC 222-02 now has a separate Earth Discharge Circuit, which is used to protect the

EDAC 222-02 and any attached equipment from lightning strikes and other external high

voltage transients, which may travel down the telephone line. The Earth Discharge Point is

located on the front right PCB screw.

NOTE: The Earth Discharge circuit must be connected to a switch board earth point

(earth buss bar) for proper surge protection.

Acknowledge Relay

The Acknowledge relay seen on earlier versions of the EDAC 222-02 has been removed from

this version of the product. If you have a specific need for this feature please contact your

distributor.

To learn more about the features and parameters available you may spend time going through the

manual. If you have any questions about the product please contact your distributor.

EDAC 222-02 AUTO ALARM DIALLER - 3 -

SPECIFICATIONS

Connections

1.5 mm screw terminals are provided for all electrical connections to the EDAC 222-02.

Power

Voltage 12-15V DC

Current 40mA idle

80-100mA active

NOTE: Power supply must comply with Telecom PTC101 requirements.

Inputs Two, clean-contact, voltage-free trigger Inputs such as relay

contacts, a float switch or a microswitch are required.

WARNING: Applying voltage to the Inputs of the auto-dialler may damage the EDAC

222-02 and will void the product warranty.

Outputs Two Outputs are available. Open collector type. Max current

120mA.

Telecom Line Two RJ11 sockets. A suitable cord can be provided

compatible with the wall socket in your country. The inner

two pins of the RJ11 socket are used for TIP + RING.

Mechanical

Dimensions 192mm length x 110mm width x 35mm height.

Weight 250gm

Cabinet Aluminium base with screw on (M4 pozi-drive) aluminium lid.

Finish White epoxy powder coat.

Mounting 4 x 4mm mounting holes in the base of the cabinet.

Line in/Line out RJ11 Modem standard (only the 2 inner pins are used as Tip

+ Ring).

Messages

Site Message Four seconds of high-quality, user-recordable speech. The

site message should clearly identify the site where the EDAC

222-02 is located.

Input Messages Eight seconds of high-quality, user-recordable speech per

Input. The Input messages should clearly identify the event

and what action needs to be taken.

Acknowledged Four seconds of high-quality, user-recordable speech to

identify when message Inputs have been acknowledged.

Idle Message Four seconds of high-quality, user-recordable speech to

identify when the EDAC 222-02 Inputs are in an idle state.

EDAC 222-02 AUTO ALARM DIALLER - 4 -

Parameters

Maximum number of telephone numbers 16, can be broken down into max of 4 lists.

Maximum number of digits per number Twenty including pauses

Time duration of phone call (playtime) Variable 1 - 9 minutes

Wait time (between each call) Variable 0 - 9 minutes.

PABX access delay Two seconds for each user inserted pause

Recordable message time Up to eight seconds per Input

Dialling mode DTMF (tone dialling)

Numeric Paging

Twenty-digit numeric strings can be transmitted to a Numeric Pager to identify the site and

active Input trigger. Numeric paging can be configured via the EDAC 222-02 keypad.

Alarm Cancellation

Alarm notification calls can be cancelled by using a DTMF touch-tone phone. The alarm can

be cancelled by pressing any numeric key on your telephone keypad or by entering a PIN,

depending on which option you have selected at the time of installation and programming.

EDAC 222-02 AUTO ALARM DIALLER - 5 -

INSTALLATION

Installation Requirements

The typical wiring schematic is shown in Figure 1.

Figure 1: Typical EDAC 222-02 Installation

1. Power Supply

A DC regulated power supply complying with Telecom PTC101 is required. The DC power supply

should be normally constant, between 12 and 15 volts.

2. Input Triggers

The Input trigger causes the EDAC 222-02 to commence the dialling sequence. A clean contact,

voltage-free Input is required. This would normally be via an external relay. The EDAC 222-02 is

configured by default for a normally open type Input. Alternatively the user can configure any of the

Inputs to accept a normally closed type Input (see function F52).

Some examples of these types of triggers might be a relay Output, a micro-switch or a float switch.

NOTE: The activating trigger must be installed correctly and maintained to prevent

false triggering.

3. Earth Discharge

The EDAC 222-02 has a separate Earth Discharge Circuit, which is used to protect the auto-dialler

and any attached equipment from lightning strikes and other external high voltage transients, which

may travel down the phone line. The Earth Discharge circuit must be connected to a common

earth point. These are usually found at a switch board earth point (earth buss bar). The Earth

Discharge should be connected using a M3 ring terminal to the bottom right PCB screw (near

phone/line socket).

Trigger Inputs

Power Supply

12V DC nominal

+ -

Exchange Line

Phone

EDAC 222-02

Line Out

Line In

Input 1

Input 2

- (Supply Ground)

+ (Supply 12VDC)

Output 2

Output 1

Earth Discharge Connection Point

Relay

EDAC 222-02 AUTO ALARM DIALLER - 6 -

4. Telephone Line

The EDAC 222-02 does not require a separate line and can be inserted as a master upstream

device in an existing telephone connection (see Secure Installation on next page). An RJ11 plug

and socket system is used. You must use the cord-set provided to connect the EDAC 222-02 to

the Telecom wall socket or the EDAC 222-02 may not work and no alarm notification calls will be

made. Extra cords are available upon request for a small charge. The EDAC 222-02 may be used

with a PABX (Private exchange) but it must be connected to an analog line.

WARNING:If the existing phone system has lights on the phone it is probably a

digital PABX system. Do not plug the EDAC 222-02 into a digital phone system

unless you are sure that it supports standard analog phone equipment. Plugging

the unit into an incorrect phone system will cause severe damage to the

equipment and void the warranty. If there are any uncertainties please contact

the supplier from whom you purchased your PABX for more information.

Points To Note:

The EDAC 222-02 can be connected between the telephone line (trunk) and the PABX

or it can be used on an extension.

When connected to a PABX and an extension, ensure that the extension socket the

EDAC 222-02 is plugged into remains active during a power failure. Refer to your PABX

instructions or contact your supplier.

When programming phone numbers for your call list, remember to add the outside line

number to the beginning of each programmed telephone number (this is usually 1or 9).

Most PABX systems require a pause between the number you dial to get an outside

line and the actual telephone number. Refer to F11 Programming Your

Telephone/Pager Numbers, for details of how to do this.

The following schematic diagrams show typical EDAC 222-02 phone line installations:

Wall Socket Installation

Figure 2 shows a typical single wall socket installation and requires two telephone-related

connections. Other telephones left off-hook may prevent the EDAC 222-02 from making calls. For

this reason, we do not recommend this type of installation.

Figure 2: Wall Socket Installation

Telecom Line

(Trunk)

Line in Line out

EDAC 222-02

EDAC 222-02 AUTO ALARM DIALLER - 7 -

Secure Installation

This is a master upstream device configuration and may require Telecom assistance to remove

the connection between the first wall socket and other wall sockets, as shown below. On an alarm

Input trigger, the EDAC 222-02 takes over the telephone line, disconnecting all other calls. The

alarm condition is immediately acted on and cannot be stopped by unauthorised means. When not

triggered, the EDAC 222-02 has no effect on the phone line.

Figure 3: Secure Installation

Extra cord required

Telecom Line

(Trunk)

Line in Line out

EDAC 222-02

EDAC 222-02 AUTO ALARM DIALLER - 8 -

Jumper Settings

Below is a table detailing the hardware jumpers on the EDAC 222-02. This is followed by a circuit

board overlay, which details where the jumpers are located on the EDAC 222-02.

NOTE: If the memory or voice protection jumpers (702 and 602) are in the secure

position, any new parameters you enter, such as phone numbers, will not be stored.

This error can be easily detected by watching the numbers being played back for

verification. The character display will show either an ,for empty, or the previous

numbers will be displayed rather than the newly entered ones.

Jumper Function Position/Mode

J600 Speaker Mode Up = Active (Default) Down = Muted

J601 External Audio Input Must be fitted to record voice using onboard microphone

J602 Voice Message Down = Open (Default) Up = Secure

J702 Phone number & Parameters Down = Open (Default) Up = Secure

Audio Input

J601

Voice Protect

J602

Ph # Protect

Speaker Mute

J600

Inhaltsverzeichnis

Andere EDAC Sicherheitssystem Handbücher

EDAC

EDAC 400-02 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung