Edge-Core ECS5610-52S Bedienungsanleitung
Installation Guide
www.edge-core.com
ECS5610-52S
48-Port Layer 3
10G Top-of-Rack Switch
Installation Guide
ECS5610-52S 48-Port 10G Top-of-Rack Switch
with 48 10GBASE SFP+ Ports,
4 40GBASE QSFP+ Ports,
1 1000BASE-T (RJ-45) Management Port,
2 Power Supply Units (F2B and B2F Airflow),
and 1 Fan Tray Module (F2B and B2F Airflow)
E062013-KS-R01
150200000495A
– 3 –
How to Use This Guide
This guide includes detailed information on the switch hardware, including
network ports, power, cabling requirements, as well as plug-in modules and
transceivers. This guide also provides general installation guidelines and
recommended procedures. To deploy this switch effectively and ensure trouble-
free operation, you should first read the relevant sections in this guide so that you
are familiar with all its hardware components.
Who Should Read This
Guide?
This guide is for network administrators and support personnel that install, operate,
and maintain network equipment. The guide assumes a basic working knowledge
of LANs (Local Area Networks) and can be read by those that are new to network
equipment, or those with more experience.
How This Guide is
Organized
The organization of this guide is based on the switch’s main hardware components.
Each chapter includes information about a specific component with relevant
specifications and installation procedures. A switch overview section is also
provided.
For Users New to Switches
— If you are new to network switches, it is
recommended that you first read all chapters in this guide before installing the
switch.
For Experienced Users
— If you are already familiar with installing and operating
network switches, the Switch Description and Installation Overview chapters
provide you with enough information to install the switch. Other chapters can be
left for reference, when needed.
The guide includes these chapters:
◆Chapter 1 - Switch Description — Includes a switch overview, key component
identification, key technical specifications, and switch deployment information.
◆Chapter 2 - Installation Overview — Includes details of the package contents
and an outline of switch installation tasks.
◆Chapter 3 - Switch Chassis — Includes switch chassis rack installaion, and
system cooling requirements.
◆Chapter 4 - Power and Grounding — Includes installation of AC power
modules, switch grounding, and powering on the switch.
How to Use This Guide
– 4 –
◆Chapter 5 - Port Connections — Includes information on network interfaces,
installing optional transceivers, and cabling specifications.
◆Chapter 6 - Switch Management — Connecting to the switch for management,
and information on the system status LEDs.
◆Appendix A - Troubleshooting — Information for troubleshooting switch
installation and operation.
Related
Documentation
This guide focuses on switch hardware and installation, it does not cover software
configuration of the switch. For specific information on how to operate and use the
management functions of the switch, see the following guides:
CLI Command Reference
Administrator’s Guide
For all safety information and regulatory statements, see the following document:
Quick Start Guide
Safety and Regulatory Information
Conventions The following conventions are used throughout this guide to show information:
Note:
Emphasizes important information or calls your attention to related features
or instructions.
Caution:
Alerts you to a potential hazard that could cause loss of data, or damage
the system or equipment.
Warning:
Alerts you to a potential hazard that could cause personal injury.
Revision History This section summarizes the changes in each revision of this guide.
April 2013 Revision
This is the first revision of this guide.
– 5 –
Contents
How to Use This Guide 3
Contents 5
Figures 7
Tables 9
1 Switch Description 10
Overview 10
Key Hardware Components 11
Key Technical Specifications 13
Data Center Deployment 14
Rack Cooling 15
2 Installation Overview 18
Package Contents 18
Switch Installation Tasks 19
3 Switch Chassis 23
General Installation Guidelines 23
How to Install the Switch in a Rack 24
Rack-Mounting Items 24
Rack-Mount Procedure 24
Switch Cooling Requirements 26
Rack Cooling 27
Fan Tray Module 27
How to Replace a Fan Tray 28
4 Power and Grounding 29
Power Supply Modules 29
Grounding the Chassis 31
How to Connect to AC Power 31
Contents
– 6 –
5 Port Connections 33
Cable Labeling and Connection Records 34
Understanding the Port Status LEDs 35
How to Install an SFP/SFP+/QSFP+ Transceiver 36
How to Connect to the Twisted-Pair Copper Management Port 37
Copper Cabling Guidelines 38
1000BASE-T Pin Assignments 38
Connection Procedure 39
How to Connect to SFP/SFP+ Fiber Optic Ports 39
Connection Procedure 40
How to Connect to QSFP+ Fiber Optic Ports 42
Connection Procedure 42
DAC Connections 44
Making DAC Connections 44
6 Switch Management 47
Understanding the System Status LEDs 48
How to Connect to the Management Port 49
How to Connect to the Console Port 50
How to Connect to the USB Port 52
How to Reset the Switch 53
A Troubleshooting 54
Diagnosing LED Indicators 54
System Self-Diagnostic Test Failure 54
Power and Cooling Problems 55
Installation 55
In-Band Access 55
Index 56
– 7 –
Figures
Figure 1: Front Panel 11
Figure 2: Rear Panel 12
Figure 3: Cloud Data Center Deployment 14
Figure 4: Converged Ethernet Data Center Deployment 15
Figure 5: F2B Airflow Cooling 15
Figure 6: B2F Airflow Cooling 16
Figure 7: Installing the Switch in a Rack 19
Figure 8: Connecting AC Power 20
Figure 9: System LEDs 21
Figure 10: Console Port 21
Figure 11: Making a Connection to a QSFP+ Transceiver 22
Figure 12: Attaching the Brackets 25
Figure 13: Installing the Switch in a Rack 25
Figure 14: Switch Cooling 26
Figure 15: Fan Tray 28
Figure 16: AC Power Supply Module 30
Figure 17: Power Supply Module LED 30
Figure 18: AC PSU and Power Socket 32
Figure 19: Port Status LEDs 35
Figure 20: Port Status LEDs 35
Figure 21: Inserting an SFP/SFP+/QSFP+ Transceiver into a Slot 37
Figure 22: RJ-45 Connector 38
Figure 23: Making Connections to an SFP+ Transceiver 41
Figure 24: Connecting to a QSFP+ Transceiver 43
Figure 25: Making DAC Connections 45
Figure 26: System LEDs 48
Figure 27: Management Port 49
Figure 28: Console Port 50
Figure 29: Console Port Connection 51
Figures
– 8 –
Figure 30: USB Port 52
Figure 31: Reset Button 53
– 9 –
Tables
Table 1: Key Technical Specifications 13
Table 2: Fan Tray Specifications 28
Table 3: AC Power Supply Module Specifications 30
Table 4: Maximum Twisted-Pair Copper Cable Lengths 37
Table 5: 1000BASE-T MDI and MDI-X Port Pinouts 38
Table 6: Maximum 10 Gigabit Ethernet Fiber Cable Lengths 39
Table 7: Maximum Gigabit Ethernet Fiber Cable Lengths 40
Table 8: Maximum 40 Gigabit Ethernet Fiber Cable Lengths 42
Table 9: Maximum 10GBASE-CR 10 Gigabit Ethernet Cable Lengths 44
Table 10: Maximum 40GBASE-CR4 40 Gigabit Ethernet Cable Lengths 44
Table 11: System Status LEDs 48
Table 12: RJ-45 Management Port Status LEDs 49
Table 13: Console Cable Wiring 51
Table 14: Troubleshooting Chart 54
– 10 –
1Switch Description
This chapter includes these sections:
◆“Overview” on page 10
◆“Key Technical Specifications” on page 13
◆“Data Center Deployment” on page 14
Overview
Thank you for choosing the ECS5610-52S switch system. This switch is built with
leading-edge technology to deliver reliable high-performance connectivity for
your data network.
The ECS5610-52S switch is a high-performance top-of-rack switch, designed for
data center operating environments. The switch provides 48 10G Ethernet Small
Form Factor Pluggable Plus (SFP+) transceiver slots, and four 40G Quad-SFP+
(QSFP+) ports. The switch also includes replaceable dual power supply units and a
fan tray module.
The switch supports a full set of Layer 2 switching, data center bridging, and Layer 3
routing features. The switch can be deployed as a top-of-rack (TOR) or distributed
spine switch to form a network fabric that can reduce infrastructure expenses and
power consumption in the data center. This network fabric can be used to
interconnect tens of thousands of servers delivering cloud computing services.
The switch also offers an option of front-to-back (F2B) or back-to-front (B2F) airflow
cooling for rack deployment with either blade servers or other switches, allowing
cool aisles to be maintained without creating “hot loops.”
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Edge-Core Schalten Handbücher
Edge-Core
Edge-Core AS4610-54T Bedienungsanleitung
Edge-Core
Edge-Core ECS4620-28T Bedienungsanleitung
Edge-Core
Edge-Core ECS4310-26T Programmierhandbuch
Edge-Core
Edge-Core ES3510MA Bedienungsanleitung
Edge-Core
Edge-Core ECS2100-10P Bedienungsanleitung
Edge-Core
Edge-Core ES3510MA Programmierhandbuch
Edge-Core
Edge-Core ES4308-POE Bedienungsanleitung
Edge-Core
Edge-Core AS9716-32D Bedienungsanleitung
Edge-Core
Edge-Core ECS4810-12M Bedienungsanleitung
Edge-Core
Edge-Core ES3526VA-PoE Bedienungsanleitung
Edge-Core
Edge-Core ES4524M-PoE Programmierhandbuch
Edge-Core
Edge-Core Gigabit Ethernet Switch Bedienungsanleitung
Edge-Core
Edge-Core ECS4150-28P Bedienungsanleitung
Edge-Core
Edge-Core ES3528M Bedienungsanleitung
Edge-Core
Edge-Core DCS520 Bedienungsanleitung
Edge-Core
Edge-Core ES3528-WDM Programmierhandbuch
Edge-Core
Edge-Core AS4610-30T Bedienungsanleitung
Edge-Core
Edge-Core AS7326-56X Bedienungsanleitung
Edge-Core
Edge-Core AS9726-32DB Bedienungsanleitung
Edge-Core
Edge-Core ECS4510-12PD Bedienungsanleitung
