EdgeStar KC2000SSTWIN Bedienungsanleitung

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere EdgeStar Küchengerät Handbücher

EdgeStar

EdgeStar TWR282S Bedienungsanleitung

EdgeStar

EdgeStar CWR1432TZ Bedienungsanleitung

EdgeStar

EdgeStar Wine Cooler TWR215ESS Bedienungsanleitung

EdgeStar

EdgeStar CWB8420DZ Bedienungsanleitung

EdgeStar

EdgeStar TWR121ES Bedienungsanleitung

EdgeStar

EdgeStar KC2000 Bedienungsanleitung

EdgeStar

EdgeStar BWC71SS Bedienungsanleitung

EdgeStar

EdgeStar CWR1662SZ Bedienungsanleitung

EdgeStar

EdgeStar IWR600DZ Bedienungsanleitung

EdgeStar

EdgeStar TWR181ES Gebrauchs- und Pflegehandbuch

EdgeStar

EdgeStar TWR121ES Bedienungsanleitung

EdgeStar

EdgeStar KC1000 Bedienungsanleitung

EdgeStar

EdgeStar TWR120 Bedienungsanleitung

EdgeStar

EdgeStar TWR210EBL Bedienungsanleitung

EdgeStar

EdgeStar TWR282S Bedienungsanleitung

EdgeStar

EdgeStar TWR125SS Bedienungsanleitung

EdgeStar

EdgeStar CWR462DZ Bedienungsanleitung

EdgeStar

EdgeStar CWR1660SZ Bedienungsanleitung

EdgeStar

EdgeStar KC2000TWIN Bedienungsanleitung

EdgeStar

EdgeStar TWR187ESS Bedienungsanleitung

EdgeStar

EdgeStar CWR1552DZ Bedienungsanleitung

EdgeStar

EdgeStar TWR282S Bedienungsanleitung

EdgeStar

EdgeStar Koldfront TWR327ESS Bedienungsanleitung

EdgeStar

EdgeStar CWR5631FD Bedienungsanleitung

Beliebte Küchengerät Handbücher anderer Marken

Tayama

Tayama TYG-35AF Bedienungsanleitung

AEG

AEG 43172V-MN Bedienungsanleitung

REBER

REBER Professional 40 Benutzerhandbuch

North American

North American BB12482G / TR-F-04-B-NCT-1 Bedienungsanleitung

Presto

Presto fountain popper Bedienungsanleitung

Westmark

Westmark 1035 2260 Bedienungsanleitung

Zanussi

Zanussi ZCG64396XA Bedienungsanleitung

HOFFEN

HOFFEN SM-9302M Bedienungsanleitung

Philips

Philips HD3133 Bedienungsanleitung

Ronco

Ronco Beef Jerky Bedienungsanleitung

Hendi

Hendi 470411 Bedienungsanleitung

Livoo

Livoo MEN386 Bedienungsanleitung

croydon

croydon WR-10313-700 Bedienungsanleitung

Chefman

Chefman RJ43-SQ Series Bedienungsanleitung

Vacmaster

Vacmaster VP680 Bedienungsanleitung

Jetmaster

Jetmaster 900HG Bedienungsanleitung

Küppersbusch

Küppersbusch EEH 610.0 Kurzanleitung zur Einrichtung

HURAKAN

HURAKAN HKN-F10 Bedienungsanleitung

Beer Dispenser

Dual-tap Tower Installation Guide

For more information on other great EdgeStar products on the web, go to http://www.edgestar.com

Models:

KC2000TWIN, KC2000SSTWIN

Introduction

Thank you for choosing EdgeStar. This guide is a supplement to the EdgeStar Beer

Dispenser Guide for your KC2000TWIN or KC2000SSTWIN EdgeStar Full Size Dual Tap

Kegerator & Draft Beer Dispenser. Please follow the EdgeStar Beer Dispenser Guide for

step-by-step instructions.

You may download the latest guide at <http://www.edgestar.com/support/>

Parts Identification

1. 3” Double Tower and Gasket

2. Singe Gauge Regulator

3. Five Pound CO2 Tank with 1 ¾” threads (Supplied empty)

4. 2 American Sankey Keg Couplers

5. 2 Faucets and 2 Handles

6. 2 Four Feet CO2 Hoses (One hose may be precut)

7. CO2 Manifold

8. Set of Bolts, Washers, Hex Nuts to secure tower

9. 6 Snap Clamps for CO2 Hoses

10. Rail (not pictured)

11. 4 Caster wheels and 2 washers (not pictured)

12. Refrigerator (not pictured)

13. Drip Tray

123456789

All the pictures in this manual are for reference

only. Your unit may be slightly different than the

images depicted. Parts included may be subject

to change.

Quick Overview Diagram

The image below should give you a visual reference on setting up your Kegerator.

Install and Secure the Tower

1. Remove the plastic plug from the top of the cabinet by opening the door and pushing up.

2. Place the rubber gasket on the cabinet and align the holes. (Note: Some models may

require you drill holes on the top of the unit.)

3. Unravel the beer line from the inside of the tower and pass it through the rubber gasket

and the hole on the top of the beer refrigerator.

4. Place the tower facing forward and insert the bolts through top of the cabinet.

5. Insert a washer through a bolt and fasten a hex nut. Repeat the process for all bolts.

Drilling holes on the top of the cabinet (If necessary)

51/8”

51/8”

Back of Unit

Rubber Gasket

1. Use the rubber gasket as a template to mark the holes. Center the gasket over the

center hole. The rear holes need to be 5 1/8th from the back of the unit. Mark the holes with

a marker.

2. Remove the gasket, then use a 13/64th” drill bit to drill the holes.