EdgeStar AVALLON Bedienungsanleitung

Inhaltsverzeichnis

Andere EdgeStar Weinkühler Handbücher

EdgeStar

EdgeStar CWF440SZ Bedienungsanleitung

EdgeStar

EdgeStar CWR450DZ Bedienungsanleitung

EdgeStar

EdgeStar CWR460DZ Bedienungsanleitung

EdgeStar

EdgeStar CWB2150FD Bedienungsanleitung

EdgeStar

EdgeStar CWR265SZ Bedienungsanleitung

EdgeStar

EdgeStar TWR182ESS Bedienungsanleitung

EdgeStar

EdgeStar TWR325ESS Bedienungsanleitung

EdgeStar

EdgeStar CWB2886FD Bedienungsanleitung

EdgeStar

EdgeStar CWR260DZ Bedienungsanleitung

Beliebte Weinkühler Handbücher anderer Marken

U-Line

U-Line Echelon Wine Captain 2075WC Betriebsanleitung

Haier

Haier WS50GA Bedienungsanleitung

Cavist

Cavist 62 Bedienungsanleitung

Kenmore

Kenmore 461.99130 Bedienungsanleitung

Danby

Danby DWC113BLSDB Bedienungsanleitung

Caple

Caple Wi6128 Bedienungsanleitung

Avanti

Avanti WC1001 Bedienungsanleitung

Frigidaire

Frigidaire FFWC38F6LS Bedienungsanleitung

Titan

Titan TT-W2454SZ Installationshandbuch

Klarstein

Klarstein Botella 166 Uno Bedienungsanleitung

Costway

Costway FP10130WL Bedienungsanleitung

Lemair

Lemair LWC59 Bedienungsanleitung

Caple

Caple WCi46B Bedienungsanleitung

Climadiff

Climadiff CLI24 Kurzanleitung

Viking

Viking VCWB301LSS Bedienungsanleitung

Caple

Caple WC6511 Bedienungsanleitung

Vinvautz

Vinvautz VZ08BHK Bedienungsanleitung

Haier

Haier JC-125GEA Bedienungsanleitung

EdgeStar, 8606 Wall St, Suite 1600, Austin, TX 78754

support.edgestar.com • [email protected] • edgestar.com

AVALLON Kickplate Replacement

Tools Needed

-Phillips Screwdriver

-12 MM Socket Driver or 12 MM Socket and a ratchet

NOTE: Empty contents of unit and disconnect from power source before attempting any repairs.

Step 1: Remove the front cabinet bracket

Lay the unit on its back

With a Phillips screwdriver, remove 5 of the 6 screws securing the cabinet bracket to the cabinet

Loosen the sixth screw and swing the bracket out of the way.

NOTE: If the 4 main silver screws are hard to remove with a screwdriver, a 12 MM socket can be used

EdgeStar, 8606 Wall St, Suite 1600, Austin, TX 78754

support.edgestar.com • [email protected] • edgestar.com

Step 2: Remove the kickplate mounting screws

With a Phillips screwdriver remove the 4 screws that secure the kick plate to the unit

Step 3: Remove the magnetic door sensor from the kickplate

Remove the screw from the wire clamp

Disconnect the electrical connectors from the back of the switch

Push the locking tabs in on the both sides of the switch to release it from the kickplate

Slide the sensor out through the top of the kickplate

EdgeStar, 8606 Wall St, Suite 1600, Austin, TX 78754

support.edgestar.com • [email protected] • edgestar.com

Step 4: Install the magnetic door sensor into the new kickplate

Slide the sensor in from the top of the kickplate until the locking tabs click and lock into place

Install the electrical connectors for the magnetic switch

Install the screw into the wire clamp

Step 5: Install the kickplate mounting screws

With a Phillips screwdriver install the 4 screws that secure the kick plate to the unit

Step 6: Install the front cabinet bracket

With a Phillips screwdriver, install the 5 screws securing the cabinet bracket to the cabinet

Tighten the screw that was left loose to swing the bracket out of the way



Procedure Completed!