Edimax EK-08RO Bedienungsanleitung

STACKABLE

8 / 16 PORT OSD KVM SWITCH

EK-08RO / EK-16RO

User’s Manual

TABLE OF CONTENTS

INTRODUCTION……………….……………………………………..1

FEATURES…………...……………………………………………….1

PACKAGE CONTENTS……………...…………..……………………2

TECHNICAL SPECIFICATIONS………..…………………………….3

SYSTEM REQUIREMENT…………………………………………..4

CABLE DIAGRAMS………………………………………………….5

PRODUCT DETAILS…………………………………………………5

HARDWARE INSTALLATION………………………………………6

USAGE…………………………………………………………………8

DAISY CHAIN CONNECTION DIAGRAM…………………………11

HOT PLUG……………………………………………………………12

ON SCREEN DISPLAY OPERATION……………………………12

TROUBLESHOOTING………………………..…………………….14

ACCESSORIES……………………………………………………...16

CERTIFICATES……………………………………………………..16

Introduction

Thank you for purchasing KVM switch. KVM switch can save your MONEY, TIME, SPACE,

EQUIPMENT and POWER.

Controlling multiple PCs from One Keyboard, Mouse and VGA Monitor. KVM switch is

loaded with features such as 19” Rack Mount Size, Daisy Chain up to eight units, On

Screen Display Menu, Password security, Searching PC server name, Hot key Control,

Front Panel Push Button and Auto Scan Control. It has complete keyboard and mouse

emulation for simultaneous PCs boot-up process.

Features

z8/16 port KVM switch is 19” rack mount size design.

zSupport Microsoft Intellimouse, Microsoft Intellimouse Explorer, Logitech Net Mouse or

the other fully compatible MS mouse.

zProvide Console PS/2 to PC serial mouse conversion

zSupport DOS, Win3.X, Win95/98/98SE/2000/ME/XP, WinNT, Netware, SCO Unix, HP

Unix, Linux

zHot Plug - Add PCs or Remove Connected PCs for Maintenance without Powering

Down the KVM switch or PCs.

zVery High Video Quality - Up To 1920X1440, Bandwidth: 200MHz

zNo Software Required - easy PC selection via On Screen Display Manual, Push

Buttons, Hot Keys

zSupport eight characters password protection and search PC server name

zAuto Scan Mode for monitoring PCs and flexible Scan time from 5~99 seconds

zKeyboard status restored when switching PCs

zLED Display for easy status monitoring

zBuzzer sound for switching port confirmation.

zUsing Standard Keyboard, VGA, Mouse cable.

zBuilt-in one extra daisy chain port and no waste any PC port

zNo DIP switch setting needed and auto detect daisy chain bank

Package Contents

8 port KVM Switch

8 port KVM Switch 1 PCS

User’s manual 1 PCS

AC to DC Power Adapter 1 PCS

Stack Kit 1 SET

Daisy Chain Cable 1 SET

16 port KVM Switch

16 port KVM Switch 1 PCS

User’s manual 1 PCS

AC to DC Power Adapter 1 PCS

Stack Kit 1 SET

Daisy Chain Cable 1 SET

Technical Specifications

Model No. 8 port KVM Switch 16 port KVM Switch

PC Port 8 16

Console Port 1 1

PC Port Connector

(All Female Type)

PS/2 Keyboard mini Din 6 pin

PS/2 Mouse Mini Din 6 pin

VGA HDDB 15pin

Console Port Connector

(All Female Type)

PS/2 Keyboard mini Din 6 pin

PS/2 Mouse Mini Din 6 pin

VGA HDDB 15pin

Daisy Chain Port Connector

(All Female Type)

PS/2 Keyboard mini Din 6 pin

PS/2 Mouse Mini Din 6 pin

VGA HDDB 15pin

PC selection On Screen Display Menu, Hot Key, Push Button

7 segment LED One Bank LED, Two PC Port LEDs

On Screen Display Control Yes

Scan Intervals 5~99 Sec.

Keyboard Emulation PS2

Mouse Emulation PS2

Mouse Conversion

(Only Console port to PC

port)

Console PS/2 to each PC port serial mouse

VGA Resolution 1920X1440

Bandwidth 200MHz

Daisy Chain MAX Level 8 levels

MAX PC Connection 120 128

Housing Metal

Power Adapter DC 12V 1A or DC 9V 1A

Operation Temperature 0~40℃

Storage Temperature -20 ~ 60℃

Humidity 0~80%, Non-Condensing

Size 19” Rack Mount / 1RU 19” Rack Mount/ 2RU

Weight (kg) 2.2kg 3.5kg

Dimension (cm) 41(L) X 16.5(W) X 4.4(H) 41(L) X 22.5(W) X 8.9(H)

System Requirements

Model No. 8 port KVM Switch

Console side One VGA Monitor

One PS/2 Keyboard

One PS/2 Mouse

Computer side 8 HDB 15 pin male to male VGA cables

8 PS/2 cables male to male for Keyboard

8 PS/2 cables male to male for Mouse

Model No. 16 port KVM Switch

Console side One VGA Monitor

One PS/2 Keyboard

One PS/2 Mouse

Computer side 16 HDB 15 pin male to male VGA cables

16 PS/2 cables male to male for Keyboard

16 PS/2 cables male to male for Mouse

Cable Diagrams

PS/2 Cable:

Mini Din 6 pin Male to Male

VGA Cable:

HDB15 pin Male to Male

AT to PS/2 keyboard adapter: (Optional)

Din 5 pin Male to Mini Din 6 pin Female

PS2 to DB9 adapter (Optional)

Mini Din 6 pin Female to DB 9 pin Female

Hardware Installation

Before installation, please make sure all of peripherals and computers have been turned off.

This example of installation is based on 8 port KVM Switch and 16 port KVM Switch have

the same installation procedures

Step 1

Find a convenient place to put your KVM Switch. Its 19” rack mount form factor makes it

ideal stackable on 19” rack. When stacking to a rack, attach the included brackets to the

sides of the KVM Switch. Take note of the length of your cables so that your computers,

KVM Switch, keyboard, mouse and monitor are distanced properly.

Step 2

Connect the monitor to the KVM Switch. Using the attached cable, or the one included with

your monitor, connect it to the HD DB-15 female port on the back of the KVM unit labeled

with the monitor symbol at the CONSOLE port connector.

Step 3

Connect the keyboard to the KVM Switch. If you have an AT type keyboard, you will need

an AT to PS/2 adapter.

Step 4

Connect the mouse to the KVM Switch.

Step 5

Now the PC connections will be made with the monitor (VGA) connections first. Connect a

VGA cable (15-pin HDDB Male / Male) with the Male side to both of the PC and the rear

panel of the KVM switch to the connector labeled VGA. Repeat this for all PCs.

The rear side of PC

Step 6

Connect the first computer’s mouse cable to the KVM Switch. If using a PS/2 cable,

connect one end to the PS/2 mouse port on the computer, and the other end to the PC1

PS/2 mouse port on the back of KVM Switch. If using a serial mouse cable (optional),

connect one end to a DB-9 serial port on the computer, and the other end to the PC1 DB-9

serial mouse port on the back of the KVM Switch. If you need Serial DB-9 to PS2 Mini Din 6

pin adapter, please contact your supplier.

The rear side of PC

Step 7

Connect the first computer’s keyboard cable to the KVM Switch. Using another PS/2 cable

connect one end to PS/2 keyboard port on the computer, and the other end to the PC1

keyboard port on the back of KVM unit. If your computer has an AT type keyboard port, you

will need a PS/2 to AT keyboard adapter.

The rear side of PC

Step 8

Double-check all of the connections. You can check the color of keyboard and mouse

connector to make sure the keyboard and mouse cables go to the corect ports.

Step 9

Repeat step 5 to 7 for the remainder of the computers.

Step 10

Attach the power supply to the KVM unit and plug the other end into an electrical receptacle.

Now you will see the LED for Port 1 light up, and you will hear a beep. Switch on your

monitor.

NOTE:

Please be remind to plug in power adapter. Although the PCs connected to KVM Switch

are able to support enough power to the stand alone switch, KVM Switch still needs a

power adapter for daisy chain more banks. If you forget to plug in power adapter on the

status of daisy chain, it may cause the unexpected status occurred.

Usage

The power on state of 8/16 port KVM switch:

When you power on KVM switch, it will ask you the password, the default password value

is eight zero –“ 00000000 “. Please key in eight zero and enter the same value at retype

field.

Note: Before you are not familiar with the operation of OSD menu, please don’t change the

password – i.e. keep default eight zero (00000000) value. Otherwise, if you have set the

password and unfortunately forget the password, you need send it back to your distributor

for maintaining the password.

The Push Buttons :

Pressing the button cyclically through all the ports.

8 port KVM Switch

1 2 3 4 5 6 7 8

7-Segment LED Indication :

You can press the button in order like mentioned-above diagram.

When you select one of eight PC ports and this PC is shut down or this PC port is

disconnected to the PC, the selected port LED will flash. When you select one of eight PCs

ports and this PC is powered on, the selected port LED is lit.

16 port KVM Switch

1 2 3 4 5 6 7 8

16 15 14 13 12 11 10 9

Reset Button ( (Bank Select) and (Port Select) ):

To press both “select” button and “bank” button of master bank simultaneously can reset

KVM switch. This reset action will not only return KVM switch back to initial state --- Check

the password, but also re-check all of slave banks which connected to mast KVM Switch.

If you add a new KVM Switch as a slave bank, please use reset button of master KVM

Switch to automatic assign a new ID to it. You can view this new slave bank go through

OSD menu. The PC ports of KVM Switch does not be reset by reset command.

Keyboard Hot Key Commands:

You can also conveniently command KVM switch by switching ports through simple key

sequences. To send commands to KVM switch, the “SCROLL LOCK” key must be

pressed twice within 2 seconds. You will hear a beep for confirmation and the keyboard

is in hot key mode. If you have not pressed any key in hot key mode within 2 seconds (It

means to key in any key follows up “Scroll Lock” “Scroll Lock” key ), the keyboard will back

to under Operation System control state.

Below are the different hot key commands:

within 2 seconds

+ + = PreviousChannel

Scroll

Lock

Scroll

Lock ↑

+ + = Next Channel

(Note:Youalsocouldpress“uparrowkey”or“downarrow

key” longer time to speed up selecting the destination

port)

Scroll

Lock

Scroll

Lock ↓

+ + = PreviousBank

Scroll

Lock

Scroll

Lock

Page

+ + = NextBank

To select PC port:

Scroll

Lock

Scroll

Lock

Page

Down

Port No.

1~8 (8port)

1~16 (16 port)

+ +

Scroll

Lock

Scroll

Lock

Bank

Port

+ + = Beeper

(Note: The default Beeper function is ON and beeper

control is only for available for Scan Mode )

Scroll

Lock

Scroll

Lock

Scroll

Lock

+ + = AutoScan

Scroll

Lock

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Edimax Schalten Handbücher

Edimax

Edimax GS-5654LX Bedienungsanleitung

Edimax

Edimax ES-5500G V3 Referenzhandbuch

Edimax

Edimax EK-UA2C Bedienungsanleitung

Edimax

Edimax EK-16RE Bedienungsanleitung

Edimax

Edimax ES-3305P V3 Bedienungsanleitung

Edimax

Edimax ES-3316P Bedienungsanleitung

Edimax

Edimax ES-5208P Bedienungsanleitung

Edimax

Edimax Rackmount Fast Ethernet Switch Bedienungsanleitung

Edimax

Edimax ES-5800G V2 Bedienungsanleitung

Edimax

Edimax GS-5424PLC V2 Bedienungsanleitung

Edimax

Edimax EK-PSK4 Bedienungsanleitung

Edimax

Edimax EK-16RE Bedienungsanleitung

Edimax

Edimax EU-HB4M Bedienungsanleitung

Edimax

Edimax 9-Port Desktop Ethernet Hub ER-5390S Bedienungsanleitung

Edimax

Edimax SP-1101W Bedienungsanleitung

Edimax

Edimax ES-3116P Bedienungsanleitung

Edimax

Edimax EK-PS2C Bedienungsanleitung

Edimax

Edimax EU-HB4P Bedienungsanleitung

Edimax

Edimax ES-5240G+ Bedienungsanleitung

Edimax

Edimax GS-1026 Bedienungsanleitung

Edimax

Edimax PS-3101P Bedienungsanleitung

Edimax

Edimax ES-5224RS+ Bedienungsanleitung

Edimax

Edimax USBH-004 Bedienungsanleitung

Edimax

Edimax EK-UA2C Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung