Ednet 84292 Bedienungsanleitung
ednet Smart Home
Quick Installation Guide
84291˙ 84292
Safety Precautions
Only use the ednet smart home devices within the specified
temperature range for:
Indoor Camera: 0 ~ 40°C
Outdoor Camera: -20 ~ 60°C
Sensors: 0 ~ 40°C
Actors: 0 ~ 40°C
When not in use, store the product in a clean and dry place in
temperatures between 0°C and 40°C
The switches and operating elements must always be freely
accessible. Please do not cover the camera and all other ednet
Smart Home products.
Do not let the indoor devices come into contact with liquids.
ednet Smart Home does not replace adult supervision. Safeguard
the health of your children, family members or pets by regularly
looking after them
Ensure that the indoor devices are only used inside. These
devices are not intended for outdoor use and can be damaged. In
this case use the specified outdoor models.
Protect the sensors and actors from electrical and other HF
devices generating interferences (microwaves, mobile phones,
etc.)
Keep the devices, network cable and power cord outside the
reach of children, since these components can be dangerous
Never try to repair ednet smart home system by yourself. Repair
and maintenance work must be carried out by specialists.
EN
In case of problems contact our customer service.
Personal Information
Read and accept the privacy policy for using the ednet smart
home systems under http://ednet-europe.eu/en/ednet-smart-
home/datenschutzerklaerung-fuer-das-kameraportal-und-apps/
Select a password with a high degree of safety for your ednet
smart home account to protect it from unauthorized access.
The password should contain at least 8 characters; we recommend
case-sensitive letters and alphanumeric characters.
Furthermore, the standard password of the camera should be
changed to avoid unauthorized access here as well.
Live stream, push notification and further services are available
via a cloud server. Despite backup solutions, system stability
and bandwidth management the uninterrupted availability of the
system cannot be guaranteed.
What's in the box
84291 84292
1 x Indoor Power Plug 1 x Outdoor Power Plug
1 x Quick Installation Guide 1 x Quick Installation Guide
Thank you for choosing ednet Smart Home, which can be up-and-
running quick and easy without complicated network settings.
Preparation
84291 and 84292 are the additional Power Plugs (actors) that you
can add onto your ednet.home Starter Kit (84299) or the IP camera
gateway (84302) as accessories.
Before starting, please make sure the following items are prepared
beforehand:
1. A Starter Kit (84299) or an IP Camera gateway (84302).
2. ednet.home App downloaded to your Android or iOS device.
Outdoor Power Plug
Indoor Power Plug
84291 84292
Actors Connections
Power Plug
Please insert the Power Plug to your Power Socket with AC 100-
240V to power on.
ON/OFF & Learning Button:
- Short press: every short press can be used to power-ON or
power-OFF the Power Plug.
- Long press: press the “Learn” button and hold it for more than
5 seconds, this would trigger the Power Plug to enter
“Learning” mode. You will see the LED blinking on the Power
Plug to indicate entering pairing mode.
ON/OFF &
Learn Button
Power Status LED indicator:
- LED On: Power Plug is switched ON
- LED Off: Power Plug is switched OFF
Factory Default:
- Long press the “Learn” button for more than 15 seconds to
reset.
Add Actors to the Gateway
ednet Smart Home system provides Sensors (Transmitters)
and Actors (Receivers).
Transmitter sensors are Motion sensors and Contact sensors.
Receiver devices are Siren, Power plug and others which can be
activated in relation with the event triggered by Transmitter sensors
such as motion sensor.
So let’s try to setup the Receiver device:
After pressing the "Sensor/Actor"
icon on the camera live-view
page, you will enter the sensor/
actor list. (1)
Please press the “+” sign on the
top right corner to add the Power
Plug (84291 and 84292) as the
Receiver device.
Please select the “type” as
“Power Plug” to add on the
App side. (2)
2
1
Please give a Name to the Power
Plug. Then press the “Learn
Sensor/Actor” button. (3)
Before pressing “Learn” on the App
side, please make sure your Power
Plug is powered and entered
“Learning” mode already. Please
long press the “Learn” button on the
Power Plug (84291 or 84292) for
5 seconds until you see the flashing
LED on the Power Plug to enter the
Learning Mode. (4)
Please press “Yes” if you hear the
power on & off clicking sound from
the Power Plug to indicate that the
“Learning” is successful. (5)
3
4
5
Then you can enter the just-added
Power Plug on the App to control
Power-ON or Power-OFF by
pressing the icons on the App. (6)
6
Trademarks
ednet is a registered trademark of ASSMANN Electronic GmbH.
Apple, Apple App Store are registered trademarks of Apple Inc.
Android, Google, Google play are registered trademarks of Google Inc.
AVM Fritz!Box is a registered trademark of
AVM Computersysteme Vertriebs GMBH.
Telekom Speedport is a registered trademark of Deutsche Telekom AG.
Note:
All other trademarks not listed here, are the property of their respective
owners.Trademarks or trade names mentioned in this manual are used to
describe the operating steps and do not imply that they are freely available. In
any case they are the property of the respective holder of the rights.
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance
with the requirements of Directive 2014/53/EU and the Directive 2011/65/EU for
RoHS compliance. The complete declaration of conformity can be requested by
post under the below mentioned manufacturer address or download under
following link:
http://ftp.assmann.com/pub/ednet/84291___4054007842916/84291_ce_mul_
DOC_20180801.pdf
Warning:
This device is a class B product. This equipment may cause some radio
interference in living environment. In this case, the user can be requested to
undertake appropriate measures to prevent interference.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
Andere Handbücher für 84292
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere Ednet Hausautomation Handbücher
