Effekta MKD 700 Bedienungsanleitung

UPS

Uninterruptible Power Supply

MKD 700 / 1000

19“ Rack

Manual

Item number: ACX11MKR70000000

ACX11MKR1K000000

Version V1.1 November 2008

UPS MKD700/1000 Manual

MKD Series

Page 2 of 41

Content

1Presentation 4

2Warranty conditions 5

2.1 Limitation of liability 6

3Safety 7

3.1 General safety instruction 7

3.2 Transport and storage 7

3.3 Placement 7

3.4 Connection 8

3.5 Operation 8

3.6 Handling batteries 9

3.7 Maintenance, servicing and faults 10

4Introduction 11

5System description 12

6Description of MKD series 13

6.1 Handling elements on the front side 13

6.1.1 LCD display 14

6.1.2 Buttons 15

6.1.3 LED display 16

6.2 Elements on the back side 17

6.3 Acoustic alert signs of the UPS 19

7Storage and unpacking 20

7.1 Storage of the UPS 20

7.2 Unpacking the equipment 20

8Installation and connecting of the UPS 21

8.1 Connecting the UPS 22

8.2 Communicational interface of the UPS 23

8.3 Connection sequence 23

9Operating and controlling the equipment 24

9.1 Operating of the UPS 24

9.1.1 Operating modes and signals 24

9.1.2 Measured value display 27

9.2 Instruction manual of the UPS 28

9.2.1 Switching-on and starting the UPS 28

9.2.2 Switching-off and power down the UPS 28

9.2.3 Changing the basic setting 29

9.2.4 Starting the testing mode 30

9.2.5 Communication 30

10 Setting-up of the UPS 31

11 Troubleshooting 32

UPS MKD700/1000 Manual

MKD Series

Page 3 of 41

12 Software 34

13 Maintenance and service 35

13.1 Measuring and autonomy time 35

13.2 Replacing the batteries 35

13.3 Service- log 36

13.4 Service - hotline: 37

13.5 Maintenance and service contracts 37

14 Technical data 38

14.1 Specifications 38

14.2 Scope of delivery / optional accessory 39

14.3 List of wearing parts 40

15 Requirements for the declaration of conformity 41

UPS MKD700/1000 Manual

MKD Series

Page 4 of 41

1 Presentation

In this instruction manual, the abbreviation UPS stands for Uninterruptible

Power Supply. The following pictograms are used in this instruction manual:

Denotes information which, if disregarded, poses a risk

to health, functionality or safety.

Warning about the handling of batteries.

Warning about dangerous electrical voltage.

Denotes additional information and tips.

Recycling symbol.

Denotes components that are governed by the

electronic scrap ordinance.

Denotes components or parts that must be disposed of

in a specific manner. Never throw these components

into the regular refuse.

This instruction manual is protected by copyright law.

The copyright owner is EFFEKTA Regeltechnik GmbH.

Trademarks:

All trademarks used are the property of their respective owners.

EFFEKTA®is a registered trademark of EFFEKTA Regeltechnik GmbH.

We reserve the right to make technical and visual changes, and we are not liable for typographical

errors (E&OE).

UPS MKD700/1000 Manual

MKD Series

Page 5 of 41

2 Warranty conditions

The delivery receipt is considered to be the initial proof of purchase and should

be stored carefully. It is required for all warranty claims. If the product is

transferred to another user, then the latter is entitled to claim under the

warranty for the remainder of the warranty period. The purchase receipt and

this declaration should be transferred to the possession of the new owner.

We guarantee that this equipment is in a functional state and corresponds in

technical terms to the descriptions in the enclosed documentation.

The warranty period for special equipment corresponds to the minimum period

prescribed by legislation.

This warranty is not valid for the following cases:

Defects due to: damage during transportation, accidents, natural disasters,

misuse, vandalism, inappropriate use, maintenance errors or incorrect

repairs by third parties.

Modifications, unauthorized tampering, incorrect operation, another device

or accessory, incorrect installation, or any modification not approved by us.

Disregard for the instructions in the supplied documentation.

Incompatibility of the product as a result of technical innovations or

regulations that may come into effect after the purchase.

Incompatibility or malfunction caused by product components not used by

us.

Appearances associated with normal ageing of the product (wearing parts).

Defects caused by external appliances.

The warranty period for parts replaced and/or repaired within the scope of this

warranty expires with the original warranty for the product.

Equipment sent in without accessories will be replaced without accessories.

Equipment returned will only be accepted if it is returned in the original

packaging.

Incidental transportation costs are generally excluded from the provisions of

the warranty.

UPS MKD700/1000 Manual

MKD Series

Page 6 of 41

EFFEKTA GmbH does not give any express or implied warranties in relation to

this equipment and its quality, performance, merchantability or suitability for a

specific purpose. In some countries, the exclusion of implied warranties is not

permitted by law. In this case, the validity of all express and implied warranties

is restricted to the warranty period. When this period expires, all warranties

cease to be valid. In some countries, a limitation of the validity period of implied

warranties is not permitted by law, in which case the above restriction is not

effective.

2.1 Limitation of liability

Compensation claims are excluded unless they are based on deliberate acts or

gross negligence of EFFEKTA GmbH or its employees. Liability under the

Product Liability Act remains unaffected. Under no circumstances will we be

held liable for:

Claims for losses or damage made by third parties against you.

Loss of or damage to your records or data or the cost of their recovery.

Financial consequential damage (including loss of earnings or savings) or

incidental damage, even in the event that we were informed of the

possibility of such damage.

Under no circumstances whatsoever will EFFEKTA GmbH be held responsible

for any coincidental, indirect, special, consequential or other damage of any

kind (including, without limitation, damage relating to loss of profit,

discontinuation of business, loss of business information or any other loss)

arising from use of the equipment or in any connection with the equipment,

whether based on a contract, compensation, negligence, strict liability, or other

claims, even if EFFEKTA GmbH was informed in advance about the possibility

of such damage. This exclusion also applies for any liability arising from claims

of third parties against the initial purchaser.

In some countries, the exclusion or limitation of coincidental or consequential

damage is not legally permitted, in which case the above declaration is not

effective.

UPS MKD700/1000 Manual

MKD Series

Page 7 of 41

3 Safety

3.1 General safety instruction

Read and observe the user manual and safety instructions in this chapter before

taking any further action (transportation, storage, connection, start-up etc.).

Since the UPS equipment uses mains voltage and has a suitable energy

accumulator (high-capacity batteries) installed either inside or outside the

device, the instructions in this chapter are very important for all users and

personnel. For this reason, appropriate safety instructions on the topic of

batteries and battery packs are also dealt with here. When using external battery

packs, you must also follow the safety instructions in the accompanying

instruction manual.

Work on the UPS equipment may only be performed by authorized technical

personnel.

3.2 Transport and storage

When storing equipment, make sure that it is also securely positioned.

The equipment must not be transported or stored upside down.

Position the equipment securely during transportation taking its centre of

gravity into account. Due to its weight, UPS equipment with integrated batteries

may drop suddenly if its position shifts slightly.

When storing equipment, make sure that it is also securely positioned.

3.3 Placement

The UPS is intended for use in ventilated rooms.

During setup or installation, the installation location prescribed by the

manufacturer must be observed.

There is a risk of condensation where the UPS is exposed to extreme and

rapid temperature changes. Before taking any further steps, the equipment

should be allowed to acclimatize for at least 2 hours.

Never set up or operate the equipment in a damp environment.

Keep fluids away from the equipment.

The UPS must not be set up near heat sources.

Ensure that the vents of the equipment are not blocked and that the circulation

of air is not impeded.

UPS MKD700/1000 Manual

MKD Series

Page 8 of 41

3.4 Connection

Only connect the UPS to an earthed shock-proof socket or, where a terminal

clamp is used, be sure to connect the protective earth conductor. Under no

circumstances should the equipment be operated without a protective earth

conductor.

The house installation socket must be easily accessible and located in the

vicinity of the UPS. In the case of a fixed connection, ensure that the shortest

possible cable lengths are used.

In case of generator mode, there hast o be a polarized connection of the UPS.

Only use VDE-tested and CE-labeled electrical cables to connect the

consumer load to the UPS. In the case of a fixed connection to the consumer

load, a suitable cable must be used.

The fuse protection for the consumer load must always be installed directly in

front of it, and never centrally in front of the UPS.

Do not operate any household appliances and power tools, e.g. fan heaters,

vacuum cleaners, drills, hairdryers, toasters etc., via the UPS.

Do not connect any consumer loads to the UPS which could overload the

equipment (e.g. laser printers).

The sum of the earth fault currents of all consumer loads connected to the UPS

must not exceed 3.5mA.

Keep the connecting cables as short as possible and always lay these

correctly. Avoid the dangers of laying connecting cables in locations where

they may be tripped over, crushed or torn open etc.

3.5 Operation

The mains power cable must never be disconnected during the operation of

the UPS, otherwise the protective earthing of the UPS and the connected

consumer loads will be lost.

Before connecting consumer at the output, the basic configuration (9.2.3) has

to be made. The output voltage with regard to the consumer and the output

frequency during battery service are very important.

The UPS equipment contains an energy accumulator (batteries). This means

that the output of the UPS may be live even if it is not connected on the line

side.

To switch off the UPS completely, first press the switch on the front of the

equipment (OFF position), wait until the UPS has switched off then disconnect

the power supply (switch off the mains input externally or disconnect the UPS

from the mains, e.g. by unplugging it).

Make sure that no fluids or foreign bodies enter the UPS.

UPS MKD700/1000 Manual

MKD Series

Page 9 of 41

To protect the UPS, avoid constant load of the output over 80% (especially

during battery service). The display of the output load is just supposed to be a

reference value. Separate measurements are necessary to ascertain the exact

output load.

3.6 Handling batteries

Warning –danger of electric shocks and burns.

Batteries can cause electric shocks and are capable of producing high short-

circuit currents which can also inflict burns.

Unauthorized persons must be kept away from batteries.

Do not place batteries against heat sources and do not throw them into a fire as

they might explode!

Do not open or destroy batteries. The electrolyte thereby released is extremely

dangerous to persons and to the environment (danger of chemical burns to skin

and eyes, toxic).

Defective batteries must be disposed of in an environmentally-friendly manner

Never throw batteries into the regular refuse.

The local waste disposal regulations must be observed.

UPS MKD700/1000 Manual

MKD Series

Page 10 of 41

3.7 Maintenance, servicing and faults

Warning –danger of electric shocks.

The UPS remains connected to the battery circuit even after it has been

disconnected from the mains power supply and has a dangerous voltage

potential. Therefore always disconnect the battery circuit before carrying out

servicing or maintenance work and make sure that the equipment is isolated

from the supply

Work on batteries may only be performed and monitored by personnel with

appropriate technical knowledge about the required precautions.

Unauthorized persons must be kept away from batteries.

When working on the UPS, the following precautions must be taken:

Remove wristwatches, rings and other metallic objects

Only use electrically-insulated tools

The UPS must not be deconstructed.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Effekta UPS Handbücher

Effekta

Effekta MH RM 6000 Bedienungsanleitung

Effekta

Effekta ACX11OFS40000000 Bedienungsanleitung

Effekta

Effekta TRITON M3 Bedienungsanleitung

Effekta

Effekta MKD 6 kVA RT Bedienungsanleitung

Effekta

Effekta THOR RM Bedienungsanleitung

Effekta

Effekta ADIRA T Bedienungsanleitung

Effekta

Effekta MI-Series Stücklistenhandbuch

Effekta

Effekta Adira 6kVA XL Bedienungsanleitung

Effekta

Effekta ME 400 Bedienungsanleitung

Effekta

Effekta RMH 700 Bedienungsanleitung

Effekta

Effekta ACX11CIS70000000 Bedienungsanleitung

Effekta

Effekta PEGASUS II 10 KVA Bedienungsanleitung

Effekta

Effekta ME 1500 Bedienungsanleitung

Effekta

Effekta ME 1000 Bedienungsanleitung

Effekta

Effekta MTD 2000 Bedienungsanleitung

Effekta

Effekta ADIRA Series Bedienungsanleitung

Effekta

Effekta TRITON PF1 Bedienungsanleitung

Effekta

Effekta MH6000 Bedienungsanleitung

Effekta

Effekta MTD-XL Bedienungsanleitung

Effekta

Effekta MKD 3000 XL Bedienungsanleitung

Effekta

Effekta THOR II T50 Bedienungsanleitung

Effekta

Effekta MT 3200 Bedienungsanleitung

Effekta

Effekta USV MTX Series Bedienungsanleitung

Effekta

Effekta Triton Series Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung