Ego Power+ HT2600 Bedienungsanleitung

WARNING: To reduce the risk of injury, the user must read and understand the

Operator’s Manual before using this product. Save these instructions for future reference.

OPERATOR'S MANUAL

56-VOLT

LITHIUM-ION

CORDLESS

HEDGE TRIMMER

MODEL NUMBER HT2600/HT2600-FC

Español p. 63

Français p. 29

56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC2

TABLE OF CONTENTS

Safety Symbols......................................................4

Safety Instructions ................................................ 5-12

Introduction .......................................................13

Speciﬁcations......................................................13

Description ..................................................... 14-16

Assembly .........................................................17

Packing List .......................................................17

Operation ...................................................... 18-23

Maintenance.................................................... 24-25

Troubleshooting ....................................................26

Warranty....................................................... 27-28

56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC 3

READ ALL INSTRUCTIONS!

WARNING: Drilling, sawing, sanding or machining wood products can expose

you to wood dust, a substance known to the State of California to cause cancer. Avoid

inhaling wood dust or use a dust mask or other safeguards for personal protection. For

more information go to www.P65Warnings.ca.gov/wood.

WARNING: Some dust created by power cutting contains chemicals known to

the state of California to cause cancer, birth defects or other reproductive harm. Some

examples of these chemicals are:

◾Lead from lead-based paints.

◾Crystalline silica from bricks, cement, and other masonry products.

◾Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending upon how often you do this type of

work. To reduce your exposure to these chemicals:

◾Work in a well-ventilated area.

◾Work with approved safety equipment, such as dust masks that are specially

designed to ﬁlter out microscopic particles.

◾Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,

and other construction activities. Wear protective clothing and wash exposed areas

with soap and water. Allowing dust to get into your mouth or eyes or to lie on the

skin may promote absorption of harmful chemicals.

56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC4

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The

safety symbols and the explanations with them deserve your careful attention and

understanding. The symbol warnings do not, by themselves, eliminate any danger. The

instructions and warnings they give are no substitutes for proper accident prevention

measures.

WARNING: Be sure to read and understand all safety instructions in this

Operator’s Manual, including all safety alert symbols such as “DANGER”, “WARNING”,

and “CAUTION” before using this machine. Failure to follow all instructions listed below

may result in electric shock, ﬁre, and/or serious personal injury.

The deﬁnitions below describe the level of severity for each signal word. Please read

the manual and pay attention to these symbols.

This is the safety alert symbol. It is used to alert you to

potential personal injury hazards. Obey all safety messages

that follow this symbol to avoid possible injury or death.

DANGER DANGER indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

WARNING WARNING indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION CAUTION, used with the safety alert symbol, indicates a hazardous

situation which, if not avoided, will result in minor or moderate injury.

DAMAGE PREVENTION AND INFORMATION MESSAGES

These inform the user of important information and/or instructions that could lead

to equipment or other property damage if they are not followed. Each message is

preceded by the word “NOTICE”, as in the example below:

NOTICE: Equipment and/or property damage may result if these instructions are not

followed.

56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC 5

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may appear on this product. Read,

understand, and follow all instructions on the machine before attempting to assemble

and operate.

Caution Indicates a potential personal injury hazard.

Read the

Operator’s

Manual

To reduce the risk of injury, user must read

operator’s manual.

Eye Protection

Always wear safety goggles or safety glasses

with side shields and a full face shield when

operating this product.

Danger- Keep

Hands Away

from Blades

Contact with blade will result in serious

personal injury.

Recycle Symbol

This product uses lithium-ion (Li-lon)

batteries. Local, state, or federal laws may

prohibit disposal of batteries in ordinary

trash. Consult your local waste authority for

information regarding available recycling and/

or disposal options.

IP...

Ingress

Protection

Degree

Classiﬁes the degree of protection provided

by an enclosure, for electrical equipment.

VVolt Voltage

mm Millimeter Length or size

in. Inch Length or size

56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC6

Direct Current Type or a characteristic of current

n0No-Load Speed Rotational speed, at no load

SPM Strokes Per

Minute Stroke speed, at no load

kg Kilogram Weight

lb Pound Weight

56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC 7

GENERAL MACHINE SAFETY WARNINGS

WARNING: Read all safety warnings, instructions, illustrations and

specications provided with this machine. Failure to follow all instructions listed

below may result in electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference.

The term “machine” in the warning refers to your mains-operated (corded) machine or

battery-operated (cordless) machine.

WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate machines in explosive atmospheres, such as in the presence of

ammable liquids, gases or dust. Machines create sparks which may ignite the

dust or fumes.

Keep children and bystanders away while operating a machine. Distractions

can cause you to lose control.

ELECTRICAL SAFETY

Machine plugs must match the outlet. Never modify the plug in any way. Do

not use any adapter plugs with earthed (grounded) machines. Unmodiﬁed plugs

and matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric shock if

your body is earthed or grounded.

Do not operate the machine in rain or wet conditions.Water entering the

machine may increase the risk of electric shock or malfunction that could result in

personal injury.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging

the machine. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

When operating a machine outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric

shock.

56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC8

If operating a machine in a damp location is unavoidable, use a GFCI protected

supply. Use of a GFCI reduces the risk of electric shock.

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when operating

a machine. Do not use a machine while you are tired or under the inuence of

drugs, alcohol or medication. A moment of inattention while operating machines

may result in serious personal injury.

Use personal protective equipment. Always wear eye protection. Protective

equipment such as a dust mask, non-skid safety shoes, hard hat or hearing

protection used for appropriate conditions will reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in the off-position before

connecting to power source and/or battery pack, picking up or carrying the

machine. Carrying machines with your ﬁnger on the switch or energizing machines

that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the machine on. A wrench

or a key left attached to a rotating part of the machine may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables

better control of the machine in unexpected situations.

Dress properly. Do not wear loose clothing or jewelry. Keep your hair and

clothing away from moving parts. Loose clothes, jewelry or long hair can be

caught in moving parts.

If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust collection

can reduce dust-related hazards.

Do not let familiarity gained from frequent use of machines allow you to

become complacent and ignore machine safety principles. A careless action can

cause severe injury within a fraction of a second.

MACHINE USE AND CARE

Do not force the machine. Use the correct machine for your application.

The correct machine will do the job better and safer at the rate for which it was

designed.

56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC 9

Do not use the machine if the switch does not turn it on and off. Any machine

that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/or remove the battery pack,

if detachable, from the machine before making any adjustments, changing

accessories, or storing machines. Such preventive safety measures reduce the

risk of starting the machine accidentally.

Store idle machines out of the reach of children and do not allow persons

unfamiliar with the machine or these instructions to operate the machine.

Machines are dangerous in the hands of untrained users.

Maintain machines and accessories. Check for misalignment or binding of

moving parts, breakage of parts and any other condition that may affect the

machine’s operation. If damaged, have the machine repaired before use. Many

accidents are caused by poorly maintained machines.

Keep cutting machines sharp and clean. Properly maintained cutting machines

with sharp cutting edges are less likely to bind and are easier to control.

Use the machine, accessories and machine bits, etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the machine for operations different from those intended could

result in a hazardous situation.

Keep handles and grasping surfaces dry, clean and free from oil and grease.

Slippery handles and grasping surfaces do not allow for safe handling and control of

the machine in unexpected situations.

BATTERY MACHINE USE AND CARE

Recharge only with the charger specied by the manufacturer. A charger that

is suitable for one type of battery pack may create a risk of ﬁre when used with

another battery pack.

Use machines only with specically designated battery packs. Use of any other

battery packs may create a risk of injury and ﬁre.

When battery pack is not in use, keep it away from other metal objects, like

paper clips, coins, keys, nails, screws or other small metal objects, that can

make a connection from one terminal to another. Shorting the battery terminals

together may cause burns or a ﬁre.

56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC10

Under abusive conditions, liquid may be ejected from the battery; avoid

contact. If contact accidentally occurs, ush with water. If liquid contact eyes,

additionally seek medical help. Liquid ejected from the battery may cause irritation

or burns.

Do not use a battery pack or machine that is damaged or modied. Damaged or

modiﬁed batteries may exhibit unpredictable behavior resulting in ﬁre, explosion or

risk of injury.

Do not expose a battery pack or machine to re or excessive temperature.

Exposure to ﬁre or temperature above 265 °F (130 °C) may cause explosion.

Follow all charging instructions and do not charge the battery pack or

machine outside the temperature range specied in the instructions. Charging

improperly or at temperatures outside the speciﬁed range may damage the battery

and increase the risk of ﬁre.

SERVICE

Have your machine serviced by a qualied repair person using only identical

replacement parts. This will ensure that the safety of the machine is maintained.

Never service damaged battery packs. Service of battery packs should only be

performed by the manufacturer or authorized service providers.

HEDGE TRIMMER SAFETY WARNINGS

Keep all parts of the body away from the blade. Do not remove cut material or

hold material to be cut when blades are moving. Blades continue to move after

the switch is turned off. A moment of inattention while operating the hedge trimmer

may result in serious personal injury.

Carry the hedge trimmer by the handle with the blade stopped and taking

care not to operate any power switch. Proper carrying of the hedge trimmer

will decrease the risk of inadvertent starting and resultant personal injury from the

blades.

When transporting or storing the hedge trimmer, always t the blade cover.

Proper handling of the hedge trimmer will decrease the risk of personal injury from

the blades.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Ego Power+ Trimmer Handbücher

Ego Power+

Ego Power+ HTA2000 Bedienungsanleitung

Ego Power+

Ego Power+ HTX6500 Bedienungsanleitung

Ego Power+

Ego Power+ ST1500E-F Bedienungsanleitung

Ego Power+

Ego Power+ HT5100E Bedienungsanleitung

Ego Power+

Ego Power+ HT2400-FC Bedienungsanleitung

Ego Power+

Ego Power+ HT2600-FC Bedienungsanleitung

Ego Power+

Ego Power+ ST1400E-ST Bedienungsanleitung

Ego Power+

Ego Power+ STA1500 Bedienungsanleitung

Ego Power+

Ego Power+ STA1500 Bedienungsanleitung

Ego Power+

Ego Power+ HT2400 Bedienungsanleitung

Ego Power+

Ego Power+ STX3800 Bedienungsanleitung

Ego Power+

Ego Power+ HTX6500/4215 Bedienungsanleitung

Ego Power+

Ego Power+ ST1620E-T Bedienungsanleitung

Ego Power+

Ego Power+ STX3800 Bedienungsanleitung

Ego Power+

Ego Power+ ST1520 Bedienungsanleitung

Ego Power+

Ego Power+ HT2401E Bedienungsanleitung

Ego Power+

Ego Power+ ST1300E-S Bedienungsanleitung

Ego Power+

Ego Power+ HT2410E Bedienungsanleitung

Ego Power+

Ego Power+ HT2600E Bedienungsanleitung

Ego Power+

Ego Power+ ST1610E-T Bedienungsanleitung

Ego Power+

Ego Power+ STA1600 Bedienungsanleitung

Ego Power+

Ego Power+ HT2410E Bedienungsanleitung

Ego Power+

Ego Power+ PPX1000 Bedienungsanleitung

Ego Power+

Ego Power+ HT2500 Bedienungsanleitung

Beliebte Trimmer Handbücher anderer Marken

MTD

MTD HT 51 E Bedienungsanleitung

McCulloch

McCulloch T22 LS Bedienungsanleitung

COCKRAFT

COCKRAFT PRO HL36-S Bedienungsanleitung

Grizzly

Grizzly CT 1800 Li Bedienungsanleitung

Peco

Peco Z Trimmer ZT-3000 Bedienungsanleitung

Solo

Solo 116 Bedienungsanleitung

Stiga

Stiga ST 1200 Bedienungsanleitung

Echo

Echo GT-225 - 10-09 Bedienungsanleitung

RedMax

RedMax BT17 Bedienungsanleitung

GreenWorks

GreenWorks STA806 Bedienungsanleitung

Parkside

Parkside PHSL 900 A3 Bedienungsanleitung

Gardeo

Gardeo PRO GPTHT2560 Bedienungsanleitung

Park

Park DT-810870 Bedienungsanleitung

Worx

Worx WG209 Bedienungsanleitung

Gardenline

Gardenline 43671/HTKS26 Bedienungsanleitung

Makita

Makita 3710 Bedienungsanleitung

Champion

Champion 100683 Bedienungsanleitung

Stihl

Stihl FS 311 Bedienungsanleitung