EGO ME0801 Bedienungsanleitung
WARNING: To reduce the risk of injury, the user must read and understand the
Operator’s Manual before using this product. Save these instructions for future reference.
Español p. 53
Français p. 26
OPERATOR'S MANUAL
EDGER
ATTACHMENT
MODEL NUMBER EA0800
EXCLUSIVELY FOR USE WITH
EGO POWER+ POWER HEAD PH1400
16-1107_EGO_EA0800_Edger Attachment_manual_NA_V1
EDGER ATTACHMENT—EA08002
TABLE OF CONTENTS
Safety Symbols ..........................................4
Safety Instructions......................................5-8
Introduction .............................................8
Specifications ...........................................9
Packing List .............................................9
Description .........................................10-11
Assembly ...........................................12-13
Operation ...........................................14-16
Maintenance ........................................17-22
Troubleshooting .........................................23
Warranty ...........................................24-25
EDGER ATTACHMENT—EA0800 3
READ ALL INSTRUCTIONS!
READ & UNDERSTAND
OPERATOR'S MANUAL
WARNING: Some dust created by power sanding, sawing, grinding, drilling
and other construction activities contains chemicals known to the state of California
to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
Lead from lead-based paints
Crystalline silica from bricks and cement and other masonry products, and
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
EDGER ATTACHMENT—EA08004
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols and the explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves, eliminate any danger.
The instructions and warnings they give are no substitutes for proper accident
prevention measures.
WARNING: Be sure to read and understand all safety instructions in this
Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,”
and “CAUTION” before using this tool. Failure to following all instructions listed below
may result in electric shock, fire, and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION.
May be used in conjunction with other symbols or pictographs.
WARNING! The operation of any power tools can result in foreign
objects being thrown into your eyes, which can result in severe eye
damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shield and a full face shield when
needed. We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields. Always use eye protection
which is marked to comply with ANSI Z87.1.
EDGER ATTACHMENT—EA0800 5
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may appear on this product. Read,
understand, and follow all instructions on the machine before attempting to assemble
and operate it.
Safety Alert Indicates a potential personal injury hazard.
Read &
Understand
Operator's
Manual
To reduce the risk of injury, user must read and
understand the operator’s manual before using
this product.
Eye Protection
Always wear safety goggles or safety glasses
with side shields and a full face shield when
operating this product.
Recycle Symbols
This product uses lithium-ion (Li-ion) batteries.
Local, state, or federal laws may prohibit disposal
of batteries in ordinary trash. Consult your
local waste authority for information regarding
available recycling and/or disposal options.
IPX4 Ingress Protection
Degree Protection from splashing water
V Volt Voltage
mm Millimeter Length or size
cm Centimeter Length or size
in. Inch Length or size
kg Kilogram Weight
lb Pound Weight
Direct Current Type or a characteristic of current
EDGER ATTACHMENT—EA08006
IMPORTANT SAFETY INSTRUCTIONS
WARNING! When using electric gardening appliances, basic safety precautions
should always be followed to reduce the risk of fire, electric shock, and personal injury,
including the following:
READ ALL INSTRUCTIONS
DANGER! Do not rely on the tool’s insulation against electric shock. To reduce
the risk of electrocution, never operate the tool in the vicinity of any wires or cables
which may carry electric current.
CAUTION! Wear appropriate personal hearing protection during use. Under some
conditions and durations of use, noise from this product may contribute to hearing loss.
Avoid Dangerous Environment – Don’t use appliances in damp or wet
locations.
Keep Children Away - All visitors should be kept at a distance away from work
area.
Dress Properly - Do not wear loose clothing or jewelry. They can be caught in
moving parts. Use of rubber gloves and substantial footwear is recommended
when working outdoors. Wear protective hair covering to contain long hair.
Use Safety Glasses - Always use face or dust mask if operation is dusty.
Use Right Appliance - Do not use appliance for any job except that for which it
is intended.
Don’t Force Appliance - It will do the job better and with less likelihood of a risk
of injury at the rate for which it was designed.
Don’t Overreach - Keep proper footing and balance at all times.
Stay Alert - Watch what you are doing. Use common sense. Do not operate the
edger when you are tired.
Do not operate the edger while under the influence of alcohol or drugs.
Keep guards in place and in working order.
Keep blades sharp. Replace dull or worn blade; do not attempt to sharpen.
Keep hands and feet away from the cutting area.
Never stand or have any part of your body in line with the path of the
edger blade.
Store Idle Appliances Indoors - When not in use, appliances should be stored
EDGER ATTACHMENT—EA0800 7
indoors in a dry and high or locked-up place with the battery pack removed- out
of reach of children.
Maintain Appliance with Care - Keep cutting edge sharp and clean for best
performance and to reduce the risk of injury. Follow instructions for lubricating
and changing accessories. Keep handles dry, clean, and free from oil and grease.
Check Damaged Parts - Before further use of the product, a guard or other part
that is damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, and any other condition
that may affect its operation. A guard or other part that is damaged should be
properly repaired or replaced by an authorized service center unless indicated
elsewhere in this manual.
Clear the area to be cut before each use. Remove all objects such as rocks,
broken glass, nails, wire, or string that can be thrown or become entangled in the
cutting attachment.
Always hold the edger firmly, with both hands on the handles, while
operating. Wrap your fingers and thumbs around the handles.
Avoid Accidentally Starting - Don’t carry the edger with your finger on the
trigger.
Do not operate the edger in gaseous or explosive atmospheres. Motors in
these appliances normally spark, and the sparks might ignite fumes.
Do not use the edger on or near graveled surfaces.
Damage to Edger - If you strike a foreign object with the edger, stop the tool
immediately, check for damage and have any damage repaired before further
operation is attempted. Do not operate with a broken guard or blade.
Replace a cracked, damaged or worn-out blade immediately, even if
damage is limited to superficial cracks. Such attachments may shatter at
high speed and cause serious or fatal injury.
Do not charge the battery pack in rain, or in wet locations.
Use only with the battery packs and chargers listed below:
BATTERY PACK CHARGER
BA1120, BA1400, BA2240,
BA2800, BA4200
CH2100
CH5500
Use Only With The 56V Lithium-Ion Power Head PH1400.
EDGER ATTACHMENT—EA08008
Do not dispose of the battery in a fire. The cells may explode. Check with
local codes for possible special disposal instructions.
Do not open or mutilate the battery. Released electrolyte is corrosive and
may cause damage to the eyes or skin. It may be toxic if swallowed.
Exercise care in handling batteries in order not to short the battery with
conducting materials such as rings, bracelets, and keys. The battery or
conductor may overheat and cause burns.
Replacement Parts - When servicing, use only identical EGO replacement parts.
Use of any other accessory or attachment may increase the risk of injury.
Battery tools do not have to be plugged into an electrical outlet;
therefore, they are always in operating condition. Be aware of possible
hazards even when the tool is not operating. Take care when performing
maintenance or service.
Remove or disconnect the battery pack before servicing, cleaning or
removing material from the product.
Do not wash with a hose; avoid getting water in motor and electrical
connections.
If situations occur that are not covered in this manual, use care and
good judgment. Contact the EGO Customer Service Center for assistance.
Save these instructions. Refer to them frequently and use them to instruct
others who may use this tool. If you lend this tool to someone else, also lend
these instructions to them to prevent misuse of the product and possible injury.
SAVE THESE INSTRUCTIONS!
NOTE: SEE YOUR POWER HEAD OPERATOR’S MANUAL FOR
ADDITIONAL SPECIFIC SAFETY RULES.
INTRODUCTION
Congratulations on your selection of the EGO EDGER ATTACHMENT. It has been
designed, engineered and manufactured to give you the best possible dependability
and performance.
Should you experience any problem you cannot easily remedy, please contact EGO
customer service center 1-855-EGO-5656.
EDGER ATTACHMENT—EA0800 9
This manual contains important information on to the safe assembly, operation and
maintenance of your product. Read it carefully before using the product. Keep this
manual handy so you can refer to it at any time.
SERIAL NUMBER _____________________ DATE OF PURCHASE _________________
YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP THEM IN A
SAFE PLACE FOR FUTURE REFERENCE
SPECIFICATIONS
Blade Length 8”
Edging Depth Up to 4”
Weight 4.99 lb. (2.26 kg)
PACKING LIST
PART NAME QUANTITY
Edger Attachment 1
Hex Wrench 1
Multi-function Wrench 1
Cotter Pin 2
Operator's Manual 1
Recommended Blade
PART NAME MODEL NUMBER
Edger Blade AEB0800
EDGER ATTACHMENT—EA080010
DESCRIPTION
KNOW YOUR EDGER ATTACHMENT (Fig.1)
The safe use of this product requires an understanding of the information on the tool and
in this operator’s manual, as well as knowledge of the project you are attempting. Before
using this product, familiarize yourself with all operating features and safety rules.
1
Multi-function Wrench
Hex Wrench
Edger Shaft
Depth-adjusting Guide Bar
Debris Flap
Screw to lock guide plate in place
Guide Plate
End Cap
Blade
Blade Guard Guide Wheel
Depth-adjusting Knob
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere EGO Kantenschneider Handbücher
