EGO CS1400E Bedienungsanleitung

WARNING: To reduce the risk of injury, the user must read and understand the

Operating Manual before using this product. Save these instructions for future reference.

OPERATING MANUAL

56V LITHIUM-ION

CORDLESS CHAIN SAW

MODEL NUMBER CS1400E

56V LITHIUM-ION CORDLESS CHAIN SAW2

TABLE OF CONTENTS

Read All Instructions ......................................3

Safety Symbols ..........................................4

Safety Instructions.....................................5-16

Introduction ............................................17

Specications ..........................................18

Unpacking .............................................19

Description .........................................20-22

Assembly ...........................................23-26

Operation ...........................................27-37

Maintenance ........................................38-44

Troubleshooting ......................................45-46

Warranty ...........................................47-48

Parts List ...........................................49-50

56V LITHIUM-ION CORDLESS CHAIN SAW 3

READ ALL INSTRUCTIONS!

This chain saw has many features for making its use more pleasant and enjoyable.

Safety, performance, and dependability have been given top priority in the design of this

product making it easy to maintain and operate.

DANGER: People with electronic devices, such as pacemakers, should consult

their physician(s) before using this product. Operation of electrical equipment in close

proximity to a heart pacemaker could cause interference or failure of the pacemaker.

WARNING: To ensure safety and reliability, all repairs and replacements should

be performed by a qualied service technician.

WARNING: Some dust created by power cutting contains chemicals known

to cause cancer, birth defects or other reproductive harm. Some examples of these

chemicals are:

 Lead from lead-based paints

 Crystalline silica from bricks and cement and other masonry products, and

 Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of

work. To reduce your exposure to these chemicals: work in a well ventilated area, and

work with approved safety equipment, such as those dust masks that are specially

designed to lter out microscopic particles.

56V LITHIUM-ION CORDLESS CHAIN SAW4

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The

safety symbols and the explanations with them deserve your careful attention and

understanding. The symbol warnings do not, by themselves, eliminate any danger.

The instructions and warnings they give are no substitutes for proper accident

prevention measures.

WARNING: Be sure to read and understand all safety instructions in this

Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,”

and “CAUTION” before using this tool. Failure to following all instructions listed below

may result in electric shock, re, and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION.

May be used in conjunction with other symbols or pictographs.

WARNING! The operation of any power tools can result in foreign objects being

thrown into your eyes, which can result in severe eye damage.

Before beginning power tool operation, always wear safety goggles

or safety glasses with side shields and a full face shield when

needed. We recommend a Wide Vision Safety Mask for use over

eyeglasses or standard safety glasses with side shields.

56V LITHIUM-ION CORDLESS CHAIN SAW 5

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may appear on this product. Read,

understand, and follow all instructions on the machine before attempting to assemble

and operate.

Safety Alert Indicates a potential personal injury hazard.

Read the

Operator’s

Manual

To reduce the risk of injury, user must read

operator’s manual.

Wear Eye

Protection

Always wear safety goggles or safety glasses

with side shields and a full face shield when

operating this product.

Wear Ear

Protection

Always wear ear protection when operating this

product.

Wear Head

Protection

Wear an approved safety hard hat to protect

your head.

Wear

Protective

Gloves

Protect your hands with gloves when handling

saw and saw chain. Heavy-duty, nonslip gloves

improve your grip and protect your hands.

Be Aware of

Kickback

Contact of the guide bar tip with any object

should be avoided

Guide Bar Tip

Kickback

Tip contact can cause the guide bar to move

suddenly upward and backward, which can

cause serious injury.

56V LITHIUM-ION CORDLESS CHAIN SAW6

Two Handed

Hold

Always use two hands when operating the

chain saw

Do Not Expose

To Rain

Do not use in the rain or leave outdoors while it

is raining.

V Volt Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

WWatt Power

min Minutes Time

Alternating

Current Type of current

Direct Current Type or a characteristic of current

n0No Load Speed Rotational speed, at no load

... /min Per Minute Revolutions per minute

56V LITHIUM-ION CORDLESS CHAIN SAW 7

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and instructions. Failure to follow the

warnings and instructions may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated (corded) power

tool or battery-operated (cordless) power tool.

WORK AREA SAFETY

 Keep work area clean and well lit. Cluttered or dark areas invite accidents.

 Do not operate power tools in explosive atmospheres, such as in the

presence of ammable liquids, petrol or dust. Power tools create sparks

which may ignite the dust or fumes.

 Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

ELECTRICAL SAFETY

 Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adaptor plugs with earthed (grounded) power tools.

Unmodied plugs and matching outlets will reduce risk of electric shock

 Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

 Do not expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock.

 Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords increase the risk of electric

shock.

 When operating a power tool outdoors, use an extension cord suitable

for outdoor use. Use of a cord suitable for outdoor use reduces the risk of

electric shock.

 If operating a power tool in a damp location is unavoidable, use a

Ground-fault circuit interrupter protected supply. Use of GFCI reduces the

risk of electric shock.

56V LITHIUM-ION CORDLESS CHAIN SAW8

PERSONAL SAFETY

 Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired

or under the inuence of drugs, alcohol, or medication. A moment of

inattention while operating power tools may result in serious personal injury.

 Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions will reduce personal injuries.

 Prevent unintentional starting. Ensure the switch is in the off-position

before connecting to power source and/or battery pack, picking up

or carrying the tool. Carrying power tools with your nger on the switch or

energizing power tools that have the switch on invites accidents.

 Remove any adjusting key or wrench before turning the power tool on.

A wrench or a key left attached to a rotating part of the power tool may result in

personal injury.

 Do not overreach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

 Dress properly. Do not wear loose clothing or jewelry. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewelry or long

hair can be caught in moving parts.

 If devices are provided for the connection of dust extraction and

collection facilities, ensure these are connected and properly used. Use

of dust devices can reduce dust-related hazards.

POWER TOOL USE AND CARE

 Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and safer at the rate for

which it was designed.

 Do not use the power tool if the switch does not turn it on and off. Any

power tool that cannot be controlled with the switch is dangerous and must be

repaired.

 Disconnect the plug from the power source and/or the battery pack from

the power tool before making any adjustments, changing accessories,

or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

56V LITHIUM-ION CORDLESS CHAIN SAW 9

 Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to operate

the power tool. Power tools are dangerous in the hands of untrained users.

 Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power tool repaired before

use. Many accidents are caused by poorly maintained power tools.

 Keep cutting tools sharp and clean. Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

 Use the power tool, accessories and tool bits etc. in accordance with

these instructions, taking into account the working conditions and the

work to be performed. Use of the power tool for operations different from those

intended could result in a hazardous situation.

BATTERY TOOL USE AND CARE

 Recharge only with the charger specied by the manufacturer. A charger

that is suitable for one type of battery pack may create a risk of re when used

with another battery pack.

 Use power tools only with specically designated battery packs. Use of

any other battery packs may create a risk of injury and re.

 When battery pack is not in use, keep it away from other metal objects,

like paper clips, coins, keys, nails, screws or other small metal objects

that can make a connection from one terminal to another. Shorting the

battery terminals together may cause burns or a re.

 Under abusive conditions, liquid may be ejected from the battery;

avoid contact. If contact accidentally occurs, ush with water. If liquid

contacts eyes, additionally seek medical help. Liquid ejected from the

battery may cause irritation or burns.

SERVICE

 Have your power tool serviced by a qualied repair person using only

identical replacement parts. This will ensure that the safety of the power tool

is maintained.

56V LITHIUM-ION CORDLESS CHAIN SAW10

CHAIN SAW SAFETY WARNINGS

 Keep all parts of the body away from the saw chain when the chain saw

is operating. Before you start the chain saw, make sure the saw chain is

not contacting anything. A moment of inattention while operating chain saws

may cause entanglement of your clothing or body with the chain.

 Always hold the chain saw with your right hand on the rear handle and

your left hand on the front handle. Holding the chain saw with a reversed

hand conguration increases the risk of personal injury and should never be done.

 Hold the power tool by insulated gripping surfaces only, because the

saw chain may contact hidden wiring. Saw chains contacting a “live”

wire may make exposed metal parts of the power tool “live” and could give the

operator an electric shock.

 Wear safety glasses and hearing protection. Further protective

equipment for head, hands, legs and feet is recommended. Adequate

protective clothing will reduce personal injury by ying debris or accidental

contact with the saw chain.

 Do not operate a chain saw in a tree. Operation of a chain saw while up in a

tree may result in personal injury.

 Always keep proper footing and operate the chain saw only when

standing on xed, secure and level surface. Slippery or unstable surfaces

such as ladders may cause a loss of balance or control of the chain saw.

 When cutting a limb that is under tension be alert for spring back. When

the tension in the wood bers is released the spring loaded limb may strike the

operator and/or throw the chain saw out of control.

 Use extreme caution when cutting brush and saplings. The slender

material may catch the saw chain and be whipped toward you or pull you off

balance.

 Carry the chain saw by the front handle with the chain saw switched off

and away from your body. When transporting or storing the chain saw

always t the guide bar cover. Proper handling of the chain saw will reduce

the likelihood of accidental contact with the moving saw chain.

 Follow instructions for lubricating, chain tensioning and changing

accessories. Improperly tensioned or lubricated chain may either break or

increase the chance for kickback.

Andere Handbücher für CS1400E

Inhaltsverzeichnis

Andere EGO Gesehen Handbücher

EGO

EGO PSA1000 Bedienungsanleitung

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Makita

Makita BPB180 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Makita

Makita LS1018L Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung

Altrad

Altrad BELLE RANGER 450 Bedienungsanleitung

Porter-Cable

Porter-Cable 725 Bedienungsanleitung