Ei Electronics Ei 176 Optical Bedienungsanleitung

Shannon Free Zone, Shannon, Co. Clare, Ireland.

Ph.+353 61 471277 Fx.+353 61 471053

Web: www.eielectronics.com

E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. Ei176 DataSht RevA

Model Ei 176 Optical

Complete smoke alarm system

Includes high intensity strobe, optical smoke alarm

and vibration pad

Rechargeable battery back up

Test button

Continuous monitoring of wiring

Interconnectable to other Ei alarms

Auxiliary sockets

Low power cell warning

Complies with BS415:1990 electrical safety

5 year guarantee

Product Description

The Ei176 is a complete smoke alarm system designed

for the deaf and hard of hearing. The system includes

the Ei173 control panel, Ei174 vibrating pad and

Ei105CD optical smoke alarm.

The Ei173 control panel includes a high intensity Xenon

strobe, a sealed lead-acid rechargeable battery for

standby use in the event of mains failure and all the

required circuitry to connect to the Ei105CD smoke

alarm and Ei174 vibrating pad

The Ei173 control panel also incorporates a Test button

and circuitry to continuously monitor the system wiring

The Ei174 vibrating pad is designed to be placed under

the mattress or pillow to waken people who fail to

respond to the strobe alarm

Up to 11 other smoke/heat alarms (Ei100C/105C/103C)

can be interconnected to the master smoke alarm

Ei100CD. The smoke alarms are all powered from the

control panel and in the event of mains failure the

rechargeable battery in the panel will power the entire

system, including the smoke alarms, for one week.

Operation

The green indicator will illuminate to show mains power

is present

The red indicator will flash once every second to show

that the mains supply is off and the system is running

on battery backup power

The red indicator will go off as the battery becomes

depleted (with mains off)

The slide switch on the control panel disconnects mains

and battery power from the control panel and

extinguishes both LED indicators

The “Test” button will check the strobe, vibration pad

and panel

When the Ei105CD optical smoke alarm is activated,

the Ei173 control panel will flash the strobe at 1Hz and

activate the vibrating pad

The interconnect wiring from the smoke alarm to the

control panel is monitored so that if the smoke alarm is

not connected or if it is open/short circuit, then the

strobe will flash and the vibrating pad will turn on

An auxiliary socket allows the connection of an extra

strobe or vibrating pad

MAINS POWERED 230V~

For the deaf and hard of hearing

Shannon Free Zone, Shannon, Co. Clare, Ireland.

Ph.+353 61 471277 Fx.+353 61 471053

Email. [email protected]

Web: www.eielectronics.com

E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. Ei176 DataSht RevA

Model Ei176 Optical

Placement Information

Alarms should be placed in accordance with the general guidelines shown in

the diagram above. These recommendations are based on the problem of

areas of “dead air” close to corners of rooms and apexes of ceilings, which

could result in the prevention of smoke reaching the smoke detector

Important Precaution:

Do not install the actual smoke/heat

alarm itself in new or renovated

buildings until all work is completed

(including floor coverings) and the

building has been fully cleaned.

The wiring can be installed when

appropriate. (Excessive dust and

debris from building work can

contaminate the smoke chamber

and cause problems, and it will also

invalidate the guarantee). If it must

be installed, cover it completely,

particularly around the edges, with

a dust cover (eg. a plastic bag),

until all cleaning is finished..

Connect wires to the unit as in

wiring diagram. All wiring must

comply with local codes.

Technical Specification

Sensor Optical, uses light scatter from

smoke

Sensitivity: Complies with BS 5446 Part 1:

2000

Source: Contains no radioactive material

Airspeed: Essentially immune to the effect

of airspeed.

Ambient Light: Chamber housing design and

compensation overcomes

problems with stray light

Button Test: Tests strobe, vibration pad and

panel

Fault Monitor: Open/short circuit

Supply Voltage: 230V AC standby 8mA, alarm

40mA

Battery back up: Sealed Rechargeable lead acid

battery

Auxiliary socket: Provides 12V/200mA in alarm

Power-On Indicator: Continuous green LED

Alarm: Xenon tube strobe (1Hz)

Temperature Range: 0 to 40°C

Humidity Range: 0% to 90% Relative Humidity

Interconnect: Up to 12 interconnected

Ei100C/105C/103C smoke/heat

alarms

Fixing: Screw fixings supplied

Plastic material: UL94VO flame retardant

Warranty: 5 year (limited) warranty

Approvals: BS 415:1990 electrical safety

Specifications are subject to change

Inhaltsverzeichnis

Andere Ei Electronics Rauchmelder Handbücher

Ei Electronics

Ei Electronics EI129 Bedienungsanleitung

Ei Electronics

Ei Electronics Ei141 Ionisation Bedienungsanleitung

Ei Electronics

Ei Electronics Ei650 Series Bedienungsanleitung

Ei Electronics

Ei Electronics Ei166R Bedienungsanleitung

Ei Electronics

Ei Electronics Ei 175 Ionisation Bedienungsanleitung

Ei Electronics

Ei Electronics Ei140RC Series Bedienungsanleitung

Ei Electronics

Ei Electronics Ei 3105TY Bedienungsanleitung

Ei Electronics

Ei Electronics Ei175 Ionisation Bedienungsanleitung

Ei Electronics

Ei Electronics Heat Alarm Ei 103R Bedienungsanleitung

Ei Electronics

Ei Electronics aico Ei146e Bedienungsanleitung

Ei Electronics

Ei Electronics Ei141EK Bedienungsanleitung

Ei Electronics

Ei Electronics Ei127 Bedienungsanleitung

Ei Electronics

Ei Electronics Ei141 Ionisation Bedienungsanleitung

Ei Electronics

Ei Electronics Ei154TL Bedienungsanleitung

Ei Electronics

Ei Electronics Ei 3105TYCH Optical Bedienungsanleitung

Ei Electronics

Ei Electronics Ei2110 Bedienungsanleitung

Ei Electronics

Ei Electronics Ei166R Bedienungsanleitung

Ei Electronics

Ei Electronics Ei100TY Bedienungsanleitung

Ei Electronics

Ei Electronics Ei3024 Bedienungsanleitung

Ei Electronics

Ei Electronics Ei 405C Handbuch

Ei Electronics

Ei Electronics Ei650 Series Bedienungsanleitung

Ei Electronics

Ei Electronics Ei161RC Ionisation Bedienungsanleitung

Ei Electronics

Ei Electronics Ei 105C Optical Handbuch

Ei Electronics

Ei Electronics Ei100R Bedienungsanleitung

Beliebte Rauchmelder Handbücher anderer Marken

x-sense

x-sense SD19-W Bedienungsanleitung

BRK electronic

BRK electronic First Alert P1010 Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-622 Bedienungsanleitung

teko

teko Astra-42A Bedienungsanleitung

Safetec

Safetec SDS-2/6 Betriebsanleitung

Siemens

Siemens PE-11C Bedienungsanleitung

System Sensor

System Sensor DH500ACDC Bedienungsanleitung

Resolution Products

Resolution Products RE612 CryptiX Bedienungsanleitung

First Alert

First Alert PC900V Bedienungsanleitung

Eminent

Eminent EM6590 E-Domotica Bedienungsanleitung

Carrier

Carrier Kidde Quell Q301 Bedienungsanleitung

VESDA

VESDA VLF-500 Bedienungsanleitung

ELRO

ELRO FS8110 Bedienungsanleitung

Heiman

Heiman SMOKI NS-626PHS Bedienungsanleitung

Regin

Regin SDD-S65 Bedienungsanleitung

Family Gard

Family Gard FG225 Bedienungsanleitung

Greystone

Greystone DSD120 Bedienungsanleitung

Aparton

Aparton ASD-10 Bedienungsanleitung