EI Ei3024 Bedienungsanleitung
Ei3024 / 3016 / 3014
Alarms
Instruction Manual
Mains Powered
Read and retain carefully for as long as the product is being used. It contains vital
information on the operation and installation of your Alarm. The leaflet should be
regarded as part of the product.
If you are just installing the unit, the leaflet MUST be given to the householder. The
leaflet is to be given to any subsequent user.
Contents
Installer Guide 4
1. Introduction 4
1.1 Overview 6
1.2 Technical Specifications 8
2. Installation 10
2.1 Important Safety Instructions 11
2.2 Where to locate the Alarm? 12
2.3 Which Alarm in what room? 16
2.4 Where in the room? 18
2.5 Locations to avoid 19
2.6 Mounting and wiring 21
2.7 Interconnecting Alarms 25
2.8 Removing the Alarm 27
2
3
User Guide 28
3. Testing 28
3.1 Testing and maintaining your Alarm 29
3.2 Cleaning your Alarm 31
4. What to do in case of alarm 33
5. Troubleshooting and Indicator summary tables 35
6. Important safeguards 43
7. Limitations of Fire Alarms 45
8. Service and Guarantee 47
8.1 Getting your Alarm serviced 48
8.2 Guarantee 48
4
1
Introduction
Installer Guide
5
The Ei3024 is a Multi-Sensor Fire Alarm with heat enhanced optical smoke sensor and automatic dust
compensation, delivering a faster response to a wider range of fires. It detects both smoke and heat
from a fire and is ideal for hallway, landing, living room and bedroom areas.
The Ei3016 is an Optical Smoke Alarm, with a proven optical sensor and automatic dust compensation
delivering a fast response to smouldering fires. It is ideal for hallway, landing and living room areas.
The Ei3014 is a Heat Alarm with a Class A1 heat detection sensor. It can only to be used as part
of a fire detection system, i.e. interconnected with Ei Electronics mains powered Multi-Sensor Fire
or Smoke Alarms. It is ideal for kitchens, garages, boiler houses and other areas where there are
normally high levels of fumes, smoke or dust i.e. places where Smoke Alarms cannot be installed
without the risk of excessive nuisance alarms.
Up to 12 Alarms can be interconnected so that if one senses fire, all Alarms sound. It can be a
hardwired interconnection, a wireless interconnection or a mixture of both (for the wireless option
an Ei3000MRF SmartLINK module needs to be added to each Alarm – sold separately).
The Ei3000 series is supplied with a mounting plate that allows very quick and simple installation
of the Alarm. The mains and battery power is automatically connected as the Alarm slides onto the
mounting plate. Each Alarm comes with built-in rechargeable backup batteries to power the Alarm
in the event of a mains failure.
AudioLINK
The Ei3000 series Alarms are AudioLINK enabled. This feature allows the user to download information
from the Alarm through the use of a mobile App. For more information on using this feature, please
refer to the relevant section on www.eielectronics.com or www.aico.co.uk.
6
1.1 Overview
Red LED
Alarm Indicator
Yellow LED
Fault Indicator
Green LED
Power Indicator
Test / Hush Button Alarm Sounder
Ei3014 Heat AlarmEi3016 Optical Alarm
Heat Sensor
(Thermistor)
RF Module
LED Indicator
RF Module
Learn Switch
Alarm
Removal
Latch
Smoke Entry
Vents
RF Module
LED Indicator
RF Module
Learn Switch
Alarm
Removal
Latch
Heat Sensor
(Thermistor)
Smoke Entry
Vents
RF Module
LED Indicator
RF Module
Learn Switch
Alarm
Removal
Latch
Ei3024 Multi-Sensor Fire Alarm
7
Red LED
Alarm Indicator
Yellow LED
Fault Indicator
Green LED
Power Indicator
Test / Hush Button Alarm Sounder
Ei3014 Heat AlarmEi3016 Optical Alarm
Heat Sensor
(Thermistor)
RF Module
LED Indicator
RF Module
Learn Switch
Alarm
Removal
Latch
Smoke Entry
Vents
RF Module
LED Indicator
RF Module
Learn Switch
Alarm
Removal
Latch
Heat Sensor
(Thermistor)
Smoke Entry
Vents
RF Module
LED Indicator
RF Module
Learn Switch
Alarm
Removal
Latch
Ei3024 Multi-Sensor Fire Alarm
8
Optical Sensor Optical (Ei3024 and Ei3016)
Heat Sensor Thermistor Class A1 Detection (Ei3014 and Ei3024)
Power Supply 100-250V AC, 50Hz, 0.25W
Battery Backup
Built-in 10-year rechargeable Vanadium Pentoxide Lithium cells. Fully
charged, the battery will provide up to 6 months (without module
fitted) or 3 months (with module fitted) back-up without mains power
Alarm Sounder Piezoelectric Horn
Alarm Sound Level 85dB(A) at 3 meters (min)
Memory Feature Indicates that the Alarm has previously detected fire
Self Test Sensors, batteries and electronics are automatically tested periodically
Test/Hush Button Checks sensors, electronics, interconnection and sounder.
If the unit is in alarm when pressed, it silences the alarm for 10min
Visual indicators Green LED – Power supply Yellow LED – Fault, EOL
Red LED – Memory or alarm (if coincides with horn sounding)
AudioLINK Enabled
Operational Life 10 years
1.2 Technical Specifications
9
Interconnection Up to 12 units can be interconnected via a hardwired or wireless
system (using optional Ei3000MRF SmartLINK module)
Fixings Supplied with Easi-fit anti-tamper mounting plate with integral
terminal block and wiring cover, includes screws and wall plugs
Operating Temperature Normal: -10°C to +40°C (Storage: -10°C to +40°C)*
Humidity Range 15% to 95% RH (non-condensing)
Plastic Material UL94V-0 flame retardant rated
Dimensions
Ei3024 and Ei3014: Product: - Ø150mm x 66mm
Package - 155mm x 155mm x 70mm
Ei3016: Product: - Ø150mm x 63mm
Package - 155mm x 155mm x 65mm
Weight 350g (including packaging)
Warranty 5 year (limited)
Approvals KM522831, KM83678, EN14604:2005+AC 2008, BS5446-2:2003
* Temperature and Humidity conditions are for normal operation and storage. Units will function outside
these ranges as required by the specific product Standards. Extended exposure to conditions outside
these ranges can reduce product life. For advice on prolonged operation outside these ranges consult
the manufacturer.
10
2
Installation
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere EI Sicherheitssystem Handbücher
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung