Eiki EIP-1 Einrichtungshandbuch

Table of Contents

1. Safety Instructions ··················································································· 2

2. The Projector ···························································································· 3

2.1 Features 3

2.2 Accessories 4

2.3 Appearance 5

3. Setting up the Projector ·········································································· 6

3.1 How to connect the projector 6

3.2 Turning on/off the projector 8

3.3 Adjusting the altitude of projected images 9

3.4 Adjusting the focus and zoom 10

3.5 Projected image size 11

4. How to use the Projector······································································· 12

4.1 Initial image adjustment 12

4.2 Control panel and remote controller 12

5. Menu ········································································································· 16

5.1 Image (VGA mode) 16

5.2 Image (Video mode) 17

5.3 Display (VGA mode) 18

5.4 Display (Video mode) 20

5.5 Audio 22

5.6 Management 23

5.7 Language 24

6. Maintenance ·····························································································25

6.1 Replacing the lamp 25

6.2 Cleaning lens 25

7. Appendix ·································································································· 26

7.1 Common problems & trouble-shooting 26

7.2 Specifications 28

1. Safety instructions

Before you use the projector, please read this manual thoroughly and

comply with the safety instructions hereunder. Improper use may cause fire,

electric shock, injuries, or reduce the life of your projector.

Warning: Please ensure the projector is grounded properly by connecting the

power cord to a grounded AC outlet. Do not defect the safety purpose of the

grounding type plug.

Warning: Do not cover the lens while the lamp lights.

Warning: To protect your eyes, please do not look at the projector’s light

source.

Warning:To replace the lamp, please turn off and unplug the projector first;

then wait for 1 hour before replacing the lamp. Please refer to

page 25 “Replacing the lamp” for the operation procedure.

Warning: Please use the power cord that comes with your projector. Please

use the grounded jack for safety.

Warning: Please do not block the openings around the projector for safety.

Warning: Do not place any drinks on top of the projector. The projector can

be damaged if wet.

Warning: Do not place the projector in excessively warm or humid areas.

Please avoid direct sunshine.

Warning: To avoid electric shock, please do not dismantle the projector by

yourself if it is not working.

Warning: To prevent your projector from dropping, please be careful when

you move or carry it.

2. The projector

2.1 Features

• With the modularized structure of the product, all you need is the main

body when conducting a presentation, thereby making your job easier.

• XGA model can receive signals with resolution up to 1280x1024. To

ensure the output quality, please adjust the setup of your computer

display card to be less than or equal to 1280 x 1024.

• Compact size, only 3.5 lbs.

• Incorporated TI single chip 0.7” DLPTM technology.

• Users may replace 150W (VIP R150/E20) lamp easily.

• Compatible with Mac / IBM PC 98.

• Compatible with NTSC/NTSC4.43/PAL/PAL-M/PAL-N/HDTV.

• Compatible with most interfaces comprising YCbCr, YPbPr, S-Video,

Composite Video/Audio.

• Fully functional remote controller, can be used as a mouse

• DVI connector can be connected to digital or standard image signals.

• Soft carrying case

2.2 Accessories

Please check if following accessories are in the box. If any items are missing,

please contact your dealer immediately.

Projector with lens cap Power cord M1DA-VGA+USB cable

Video/Audio cable PC Audio in/out cable S-video cable

VGA cable USB mouse cable Remote controller w/

AAA battery x 2

Soft Carrying Case

2.3 Appearance

Control panel

Speaker

Video Enhanced

Ada

Lens cover

Focus Ring

Zoom Ring

Screw

Main Body

Infra Red Remote Receiver

Outlet Grille

Warning Do keep the flow out of Outlet Grille free.

3. Setting up the projector

3.1 How to connect the projector

Depending on your purpose, you can select any of the following connection

methods.

1) For displaying data only

Find the M1DA-VGA+USB cable; connect M1DA connector to the main body;

and connect VGA and USB connectors to the computer. Then you can start

presentation. Under such circumstance, video and audio function won’t be

available.

Foot Adjuster button

Foot Adjuster

2) For playing video with audio effects

Connecting with the Video Enhanced Adaptor; and choose terminals below to

connect.

1. Power cord

2. VGA signal in port

3. USB mouse control

4. S-Video signal in port

5.6 Composite Video signal in port

7.8 PC Audio In/Out port

Notes

1. Please make sure that both projector and computer are

shutdown.

2. Plug USB cable into computer.

3. Plug one end of the VGA cable into the projector.;

4. Plug the other end into the computer.

5. Plug the power cord into the power connector on the side

of projector; and plug into the socket.

6. Turn on projector first, then computer.

Connecting to a Compute

3.2 Turning on/off the projector

Turning on the projector

1. Remove the lens cover.

2. Make sure the signal cables are connected.

3. Plug-in the power cord. LED indicator flashes slowly.

4. Press the Power key on the remote controller or control panel to turn on the

projector. LED indicator lights up consistently at this time.

5. The message “Warming up! Please wait.” appears on the screen of the

projector. Please wait for 20 seconds, the projector will detect the input signal

source automatically.

6. If the message “No Signal!” appears on the screen, please check if the signal

source has been activated or the signal cables have been connected.

7. To have the best image performance, press “Auto/Enter” each time when you

turn on the projector.

Caution When power is on, the projector will automatically detect if the

projector is overheated internally. If yes, the LED indicator flashes

rapidly and the fan cools down automatically after 8 seconds. The

Power key does not function under this situation.

Turning off the projector

1. Press the Power key to power off the projector lamp.

2. When you press the Power key, you’ll see the message “Press Power Key

again to power off lamp”. Then you can press the Power key to shutdown the

projector; or this message will disappear automatically after 5 seconds.

3. As soon as the lamp is off, the LED indicator flashes rapidly. The Power key

doesn’t function at this time.

Notes: Please wait at least 120 seconds before you turn on the projector again. You

should turn on the projector only after the LED indicator flashes slowly.

4. Unplug the power cord.

Caution To protect the lamp, please do not pull out the power cord right after the

lamp is off. Please wait at least 120 seconds when the fan stops.

3.3 Adjusting the altitude of the projected image

Please use the foot adjuster to adjust the height of projector.

Higher

1. Hold the foot adjuster button.

2. Raise the projector to the height you like; and then release the foot adjuster to

fix the projector.

Lower

1. Hold the foot adjuster.

2. Lower projector to the height you like; and then release the foot adjuster to fix

the projector.

Foot Adjuster Button

Foot Adjuster

Inhaltsverzeichnis

Andere Eiki Projektor Handbücher

Eiki

Eiki EK-100 series Bedienungsanleitung

Eiki

Eiki EIP-HDT20 Bedienungsanleitung

Eiki

Eiki EIP-UHS100 Bedienungsanleitung

Eiki

Eiki EK-610UA Bedienungsanleitung

Eiki

Eiki LC-WGC500 Bedienungsanleitung

Eiki

Eiki LC-7000U Einrichtungshandbuch

Eiki

Eiki Multimedia Projector LC-XG400 Bedienungsanleitung

Eiki

Eiki 3870A Bedienungsanleitung

Eiki

Eiki LC-XSP2600 Bedienungsanleitung

Eiki

Eiki LC-WAU200i Bedienungsanleitung

Eiki

Eiki EK-600U Bedienungsanleitung

Eiki

Eiki EK-815U Bedienungsanleitung

Eiki

Eiki LC-XT1 Einrichtungshandbuch

Eiki

Eiki LC-XB250A Bedienungsanleitung

Eiki

Eiki NST-1 Einrichtungshandbuch

Eiki

Eiki LC-XBL25 Bedienungsanleitung

Eiki

Eiki LC-XB27 Bedienungsanleitung

Eiki

Eiki LC-XB41 Bedienungsanleitung

Eiki

Eiki LC-X8 Bedienungsanleitung

Eiki

Eiki LC-X985 Montage- und Bedienungsanleitung

Eiki

Eiki LC-XB21A Bedienungsanleitung

Eiki

Eiki LC-XB42 Bedienungsanleitung

Eiki

Eiki EK-610U Bedienungsanleitung

Eiki

Eiki EK-810U Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung