Eikon ES500 Bedienungsanleitung
LEGEND
1Voltage and Preset(s) Selection
2Bluetooth Activation
3OLED Display
4Onboard Footswitch
5Preset Settings
6Jumpstart
7C1 - Machine Port
8C2 - Footswitch/Machine Port
9 USB5v(AppleDeviceCertied)
10 USB 5v (Universal)
11 Magnetic and Sticky Foot Base
12 Power Input
13 Eikon Bluetooth (Foot)Switch™
11 3
910
11 12
13 Eikon Bluetooth (Foot)Switch™
Top Bottom
5 1 4
7 8
ES500 Power Supply - Quick Start Guide
Download the User Manual at www.es500.eikondevice.com/user-manual
216
NEED HELP?
PAIR YOUR
(FOOT)SWITCH
1. PRESS Bluetooth button.
Wait until READY TO PAIR is
displayed on the screen.
2. PRESS and HOLD the Eikon
Bluetooth (Foot)Switch (13).
3. When the ES500 interface
ashes,RELEASE and wait one
second,andPRESS again.
Device is paired when
BLUETOOTH PAIRED
is displayed.
RUN TWO
MACHINES
1. PRESS and HOLD Onboard
Footswitch button for three
seconds.
2. PRESS Down Arrow to
access the Dual Channel menu.
3. PRESS Down Arrow to
activate Dual Channel mode.
4. PRESS the Preset button
to switch between C1 and C2
machine ports.
ROTATE YOUR
DISPLAY
1. PRESS and HOLD Jumpstart
for three seconds.
2. PRESS Up Arrow.
3. PRESS any of the four Arrows
to set the direction of the
ES500 display.
ES500 Power Supply - Quick Start Guide
QUICK TIPS
USE THE (FOOT)SWITCH
PRESS Bluetooth button to
activate Bluetooth (Foot)Switch (13).
SET VOLTAGE
PRESS or PRESS and HOLD Up
and Down Arrows to change
voltage setting.
0.5v JUMPSTART
PRESS Jumpstart button to
turn on the Jumpstart mode.
SLEEP MODE
Sleep mode is activated after
30 minutes of inactivity.
Andere Eikon Stromversorgung Handbücher
