EINHELL WorkZone WZAW 150 Bedienungsanleitung

GB IRE WZAW 1500151 649 1500 1890 946 244 www.einhell.co.ukAFTER SALES SUPPORT

arC WEldEr

Quick Set-Up Guide

using tHE arC WEldEr

IMPORTANT: Read all the safety warnings in the User Instructions before you start welding.

Ensure you wear/use all the appropriate Gloves, Apron and Personal Protective Safety

equipment while you are using the welder.

Easy stEps to gEtting startEd

1) Unpack the Arc Welder

a) Open the carton carefully and

remove all items.

b) Ensure you have all items before

you discard the packaging.

Continued overleaf...

Fig 1

2) Assemble the Face Shield

Fig 2 K L M

S R

Fig 3 M

K L

Fig 4

Q Q

SFig 5

K, L, M

Fig 6 S

2. Fig 7 Fig 8

Fig 9

GB IRE WZAW 1500151 649 1500 1890 946 244 www.einhell.co.ukAFTER SALES SUPPORT

5) Refer to the User Instructions for all other information.

IMPORTANT: Keep the electrode away from any item connected to the earth

terminal, when you switch on the welder.

Easy stEps to gEtting startEd - ContinuEd

• Place the welding glass (l) and the transparent safety glass (m) over it in the frame for

the safety glass (k) (Fig. 3).

• Press the safety glass retaining pins (q) into the holes in face shield frame (s) from the

outside (Fig. 4).

• Place the frame for the safety glass (k) with the welding glass (l) and transparent safety

glass (m) from the inside into the recess in the face shield frame (s), press the safety

glass retaining bushes (n) onto the safety glass retaining pins (q) until they engage to

secure the frame for the safety glass (k). The transparent safety glass (m) must be on

the outside (Fig. 5).

• Bend the top of the face shield frame (s) inwards (Fig. 6/1) and fold down the top

corners (Fig. 6/2).

Now bend the outer sides of the face shield frame (s) inwards (Fig. 6/3) and connect

them by pressing the top corners and outer sides together. When the retaining pins

engage, you should be able to hear 2 clear clicks on each side (Fig. 6/4).

• When the top corners of the face shield are connected as shown in Figure 7, place the

screws for the handle (p) from the outside through the three holes in the face shield

(Fig. 8).

• Turn over the face shield and place the handle (r) over the threads on the three screws

for the handle (p). Secure the handle (r) to the face shield using the three nuts for the

handle (o) (Fig. 9).

3) Connecting the earth Terminal

Connect the earth terminal (-) (2) directly to the part you wish to weld & Insert the

unsheathed end of the selected electrode into the electrode holder & adjust the

current setting on the welder to suit the welding electrode and materials to be

welded. The face shield must be used at all times for welding. It protects your

eyes from the radiation emitted by the arc whilst still enabling you to view the

welding process.

arC WEldEr

Quick Set-Up Guide

Inhaltsverzeichnis

Andere EINHELL Schweißsystem Handbücher

EINHELL

EINHELL BT-IW 100 Bedienungsanleitung

EINHELL

EINHELL LE-CEN 151 Bedienungsanleitung

EINHELL

EINHELL TC-IW 150 Bedienungsanleitung

EINHELL

EINHELL BT-EW 160 Bedienungsanleitung

EINHELL

EINHELL NSG 270 F Bedienungsanleitung

EINHELL

EINHELL TC-FW 100 Bedienungsanleitung

EINHELL

EINHELL 15.460.40 Bedienungsanleitung

EINHELL

EINHELL TC-EW 160 D Bedienungsanleitung

EINHELL

EINHELL BT-IW 150 Bedienungsanleitung

EINHELL

EINHELL TC-GW 190 D Bedienungsanleitung

EINHELL

EINHELL BT-EW 150 V Bedienungsanleitung

EINHELL

EINHELL BT-EW 150 V Bedienungsanleitung

EINHELL

EINHELL CEN 160 /1 F Bedienungsanleitung

EINHELL

EINHELL BT-GW 911D Bedienungsanleitung

EINHELL

EINHELL BT-EW 150 Bedienungsanleitung

EINHELL

EINHELL NSG 180 F Bedienungsanleitung

EINHELL

EINHELL 15.441.60 Bedienungsanleitung

EINHELL

EINHELL New Generation NSG 230 F Bedienungsanleitung

EINHELL

EINHELL BT-GW 170 Bedienungsanleitung

EINHELL

EINHELL TC-IW 110 Bedienungsanleitung

EINHELL

EINHELL CEN 160/1F Bedienungsanleitung

EINHELL

EINHELL BT-GW 190 D Bedienungsanleitung

EINHELL

EINHELL CEN 151/1 Bedienungsanleitung

EINHELL

EINHELL 15.749.90 Bedienungsanleitung

Beliebte Schweißsystem Handbücher anderer Marken

Berner

Berner PLASMACUT 54 Bedienungsanleitung

Pro Spot

Pro Spot PR-155 Bedienungsanleitung

Forney

Forney 210 Bedienungsanleitung

Thermal Arc

Thermal Arc 400S Bedienungsanleitung

Lincoln Electric

Lincoln Electric HANDYMIG 170I Bedienungsanleitung

GYS

GYS PROTIG 201 AC/DC Bedienungsanleitung

TAFA

TAFA 30*8B35 Bedienungsanleitung

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Bedienungsanleitung

ESAB

ESAB Buddy Arc 145 Bedienungsanleitung

CIGWELD

CIGWELD 636804 Kurzanleitung

Red-D-Arc

Red-D-Arc DC-400 Bedienungsanleitung

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung

Elettro

Elettro HI-MIG 3000 SYNERGIC Bedienungsanleitung

WIA

WIA Weldmatic 270 CP132-2 Bedienungsanleitung

Sonics

Sonics H520T Bedienungsanleitung

Miller

Miller Big Blue 400D Bedienungsanleitung

NewArc

NewArc RT2000 Kurzanleitung

Hypertherm

Hypertherm powermax1000 Bedienungsanleitung