Eizo CuratOR EX3141-3D Bedienungsanleitung

Important

Please read this “Installation Manual”, and “Instructions for Use”

(separate volume) carefully to familiarize yourself with safe and

effective usage.

Refer to the “Instructions for Use” for information on the installation /

connection of the monitor.

Color LCD Monitor

Installation Manual

This product has been adjusted specically for use in the region to which it was originally shipped. If

operated outside this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless

prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every

effort has been made to ensure that this manual provides up-to-date information, please note that EIZO

monitor specications are subject to change without notice.

CONTENTS

CONTENTS............................................................. 3

Chapter 1 Basic Adjustment / Setting.............. 4

1-1. Loading the Monitor Settings...................... 4

1-2. Switching Input Signals ............................... 5

1-3. Using Function Buttons ............................... 5

1-4. 3D/2D Switching............................................ 6

Chapter 2

Advanced Adjustments / Settings...

2-1. Operation via the Main Menu....................... 7

2-2. Functions of the Main Menu ........................ 8

●3D.................................................................... 8

●Video Cong.................................................... 9

●System Cong................................................10

●Window Cong...............................................12

●PRESET.........................................................13

●Control............................................................14

Chapter 3 Troubleshooting.............................. 15

3-1. No Picture Displayed...................................15

3-2. Imaging Problems........................................16

3-3. Other Problems............................................16

Chapter 4 Reference ........................................ 17

4-1. Main Default Settings ..................................17

4-2. PinSpecications........................................18

Appendix.............................................................. 19

Trademark ................................................................19

License .....................................................................19

LIMITED WARRANTY............................................. 20

Recycling Information ............................................21

English

CONTENTS

4Chapter 1 Basic Adjustment / Setting

Chapter 1 Basic Adjustment / Setting

This chapter describes the basic functions that can be adjusted and set by pressing the buttons on the front

of the monitor.

1-1. Loading the Monitor Settings

It is possible to switch to PRESET, FACTORY, or the USER settings that have been set in advance.

PRESET Basic settings are made in advance at the factory. Settings cannot be changed.

FACTORY Returns to settings when shipped from the factory.

USER Various settings including menus can be made for personal use. For details, see “PRESET”

(page 13).

1. Press (PRESET).

The preset menu is displayed.

Press to select the PRESET number, FACTORY, or USER number to

load, and then press (ENTER).

The pre-made settings are loaded and the settings are changed. The selectable settings are as

follows.

• PRESET1 to PRESET5

• FACTORY

• USER1 to USER10

Note

• The “PRESET” menu will disappear after ve seconds have elapsed if no operation is performed.

• is displayed for the USER number that has already been registered.

• When selecting a USER number that has not yet been registered, “No Data” is displayed.

• For information about the main default settings, see “4-1. Main Default Settings” (page 17).

Chapter 1 Basic Adjustment / Setting

1-2. Switching Input Signals

Select the signal input to the monitor and display it on the screen.

1. Press (INPUT).

The “Input Select” menu appears.

Press to select an input signal.

This switches to the selected input signal.

Press (INPUT).

The menu screen exits.

Note

• If you press (INPUT) while the “Input Select” menu is displayed in dual screen mode, the “Input Select” menu

of the subscreen is displayed.

• The Input Select menu will display for 7 seconds without input before it disappears.

1-3. Using Function Buttons

Execute the functions assigned to the function buttons (F1 ( ), F2 ( ), F3 ( ) and F4 ( )).

For information on how to set a function to each button, see

“Function” (page 10)

1. Press F1 ( ), F2 ( ), F3 ( ) or F4 ( ).

When the function menu is displayed, the function associated with the button that is pressed will run.

Note

• In dual screen mode, press (INPUT) to select a screen for performing the target function.

6Chapter 1 Basic Adjustment / Setting

1-4. 3D/2D Switching

Switch between 3D and 2D.

1. Press 3D/2D ( (ENTER) ) button.

3D and 2D are toggled each time this button is pressed.

Note

• 3D mode indicator ( ) is displayed on the upper left of the screen in 3D mode.

Chapter 2 Advanced Adjustments / Settings

This chapter describes advanced monitor adjustments and settings procedures using the main menu.

2-1. Operation via the Main Menu

1. Menu display

1. Press (MENU).

The main menu is displayed.

2. Press to select the desired item, and then press .

Adjustments / Settings

1. Press to select the desired item.

2. Press to set.

If “Next Menu” is displayed for any item, press to display the next item.

Exiting

1. Repeatedly press (MENU), to exit the menu screen.

8Chapter 2 Advanced Adjustments / Settings

2-2. Functions of the Main Menu

●3D

Adjustments / settings for 3D display.

Function Settings Description

3D/2D Selection 3D

Switches 3D/2D display.

Signal Format SIMUL

TOP AND BOTTOM

SIDE BY SIDE

LINE BY LINE

Sets the signal format in 3D mode.

• “SIMUL”

Displays in 3D mode by inputting left-eye signals from DVI-D 1

or SDI 1 and right-eye signals from DVI-D 2 or SDI 2. Displays in

3D mode by inputting Dual-stream signals (SDI 1 (LEVEL B) or

SDI 2 (LEVEL B)).

• “TOP AND BOTTOM”

Displays in 3D mode by inputting signals in TOP AND BOTTOM.

• “SIDE BY SIDE”

Displays in 3D mode by inputting signals in SIDE BY SIDE.

• “LINE BY LINE”

Displays in 3D mode by inputting signals in LINE BY LINE.

Left/Right Swap Off

Switches the displays of the left-eye signal and the right-eye signal.

H Parallax -62 to 62 Adjusts horizontal offset of the left-eye signal and the right-eye

signal. If you do not experience a 3D effect, this may be improved by

adjusting the parallax.

V Parallax -31 to 31 Adjusts vertical offset of the left-eye signal and the right-eye signal. If

you do not experience a 3D effect, this may be improved by adjusting

the parallax.

Attention

• The settings of “Signal Format”, “Left/Right Swap”, “H Parallax” and “V Parallax” cannot be changed in 2D

mode.

• When a 4K signal is input in 3D mode, only SIDE BY SIDE and LINE BY LINE signal formats are supported.

Note

• 3D mode indicator ( ) is displayed on the upper left of the screen in 3D mode.

Chapter 2 Advanced Adjustments / Settings

●VideoCong

Adjustments / settings for image display.

Function Settings Description

Color 0 to 100 Adjusts image color depth.

Tint 0 to 100 Adjusts skin tone.

Brightness 0 to 100 Adjusts dark (black) areas of the image.

Picture 0 to 100 Adjusts image contrast.

S.R.S.C. 0 to 20 Adjusts picture crispness.

Gamma 1.8 to 2.6

DICOM

HLG

Adjusts brightness variation.

Backlight 0 to 100 Adjusts backlight brightness. In case of multiple screens,

select the main one. This setting cannot be changed when

a screen other than the main screen is selected.

Color Temp 6500 K

9300 K

Off

Switches tone of the image.

R Gain 0 to 100 Adjusts the intensity of red in bright areas.

G Gain 0 to 100 Adjusts the intensity of green in bright areas.

B Gain 0 to 100 Adjusts the intensity of blue in bright areas.

R Bias 0 to 100 Adjusts the intensity of red in dark areas.

G Bias 0 to 100 Adjusts the intensity of green in dark areas.

B Bias 0 to 100 Adjusts the intensity of blue in dark areas.

Color Gamut sRGB

Native

BT2020

Sets the color reproduction range.

Input Color Format RGB

YUV422

YUV444

Auto

Sets the color format when there is a DisplayPort input.

Input Range 0-255

16-235

16-255

Modulates the available gradation range in accordance with

the input signal.

• “0-255”

Use this setting when connecting to a PC format

device.

• “16-235”

Use this setting when connecting to a video format

device or PC format device.

• “16-255”

Use this setting when connecting to a video format

device or PC format device.

YUV Color Matrix BT601

BT709

BT2020

Auto

Sets the transformation matrix used when transforming the

YUV signal to an RGB signal. Use when images cannot be

displayed correctly due to an input signal problem.

Noise Reduction Off

Light

Middle

Heavy

Select picture noise reduction level.

10 Chapter 2 Advanced Adjustments / Settings

●SystemCong

Settings for devices.

Function Settings Description

Function F1 POP

Display Direction

Scan Size

Gamma Select

Color Gamut

Noise Reduction

Zoom

H Parallax

V Parallax

Signal Format

Undef

Sets functions assigned to function buttons.

• “POP”

Switches between dual screen (P out P: Splits screen

horizontally) and single screen display.

• “Display Direction”

Rotates / ips the screen.

• “Scan Size”

Switches between the setting values of “Video Cong”

and “Noise Reduction” in sequence.

• “Gamma Select”

Switches the setting values of “Video Cong” -

“Gamma” in sequence.

• “Color Gamut”

Modulates the color reproduction range.

• “Noise Reduction”

Switches between the setting values of “Video Cong”

and “Noise Reduction” in sequence.

• “Zoom”

Expands the current view on the display.

• “H Parallax

Adjusts Horizontal Parallax.

• “V Parallax”

Adjusts Vertical Parallax.

• “Signal Format”

Sets signal format when in 3D mode.

• “Undef”

No function assigned.

SDI Main Stream 1

Stream 2

Sets the picture on main screen for dual-stream SDI signal.

This is also applied to the single screen display.

SDI Sub Stream 1

Stream 2

Sets the picture on the subscreen when dual-stream SDI

signal is input.

Status Display Continue

3Sec

Off

Whether information about the current input signal and

terminal name is displayed.

Information about the resolution at the PC signal input is

also displayed.

Power On Setup Last

PRESET1 to

PRESET5

FACTORY

USER1 to USER10

Settings when switching on can be set in advance.

• “Last”

Starts with last saved status.

• “PRESET1” to “PRESET5”

Start up with 5 types of preset settings, stored in

advance in the monitor as xed data.

• “FACTORY”

Returns to factory settings.

• “USER1” to “USER10”

Starts up with status saved to USER. It is possible to

store 10 types of data for each USER.

Inhaltsverzeichnis

Andere Eizo Monitor Handbücher

Eizo

Eizo L985 EX Bedienungsanleitung

Eizo

Eizo FORIS FS2332 - Bedienungsanleitung

Eizo

Eizo FlexScan EV2736WFS3 Bedienungsanleitung

Eizo

Eizo ColorEdge CG2420 Bedienungsanleitung

Eizo

Eizo ColorEdge CS2410 Bedienungsanleitung

Eizo

Eizo FlexScan EV2450-BK Bedienungsanleitung

Eizo

Eizo FlexScan EV2750 Bedienungsanleitung

Eizo

Eizo FP-301 Bedienungsanleitung

Eizo

Eizo ColorEdge CS270 Bedienungsanleitung

Eizo

Eizo FlexScan S1934 Bedienungsanleitung

Eizo

Eizo FlexScan S2233W Bedienungsanleitung

Eizo

Eizo ColorEdge CS230 Bedienungsanleitung

Eizo

Eizo RadioForce RX650 Bedienungsanleitung

Eizo

Eizo FlexScan EV2760 Bedienungsanleitung

Eizo

Eizo COLOREDGE CG2730 Bedienungsanleitung

Eizo

Eizo FlexScan L367 Bedienungsanleitung

Eizo

Eizo FlexScan L560T-CB Bedienungsanleitung

Eizo

Eizo FlexScan S2133 Bedienungsanleitung

Eizo

Eizo L557-AS Bedienungsanleitung

Eizo

Eizo FlexScan S2100 Bedienungsanleitung

Eizo

Eizo ColorEdge CG248-4K Bedienungsanleitung

Eizo

Eizo FlexScan EV2495-WT Bedienungsanleitung

Eizo

Eizo FLEXSCAN F931 - Bedienungsanleitung

Eizo

Eizo EIZO ColorEdge CG241W Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung