Eizo CuratOR EX3220 Bedienungsanleitung

Important

Please read this Installation Manual, and “Instructions for Use”

(separate volume) carefully to familiarize yourself with safe and

effective usage.

•Refer to the Instructions for Use for information on the installation /

connection of the monitor.

•The latest Installation Manual is available for download from our web

site:

http://www.eizoglobal.com

Color LCD Monitor

Installation Manual

This product has been adjusted specically for use in the region to which it was originally shipped. If

operated outside this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless

prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every

effort has been made to ensure that this manual provides up-to-date information, please note that EIZO

monitor specications are subject to change without notice.

CONTENTS

CONTENTS............................................................. 3

Chapter 1 Basic Adjustment / Setting.............. 4

1-1. Loading the Monitor Settings...................... 4

1-2. Switching Input Signals ............................... 5

1-3. Using Function Buttons ............................... 6

Chapter 2 Advanced Adjustment / Setting ...... 7

2-1. Operation via the Main Menu....................... 7

2-2. Individual Functions of Main Menu............. 8

●Input Cong ..................................................... 8

●Video Cong ...................................................10

●System Cong ................................................11

●Function ..........................................................13

●Window Cong ...............................................14

●Remote ...........................................................16

●Control ............................................................19

Chapter 3 Troubleshooting.............................. 20

3-1. No Picture Displayed .................................. 20

3-2. Imaging Problems........................................21

3-3. Other Problems............................................21

Chapter 4 Reference ........................................ 22

4-1. Main Default Settings ................................. 22

4-2. PinSpecications....................................... 23

Appendix.............................................................. 24

LIMITED WARRANTY............................................. 24

Trademark ............................................................... 25

License .................................................................... 25

Recycling Information ........................................ 26

4Chapter 1 Basic Adjustment / Setting

Chapter 1 Basic Adjustment / Setting

This chapter describes the basic functions that can be adjusted and set by pressing the buttons on the front

of the monitor.

1-1. Loading the Monitor Settings

It is possible to switch to PRESET, FACTORY, or the USER settings that have been set in advance.

PRESET Basic settings are made in advance at the factory. The settings of PRESET cannot be

changed.

FACTORY Returns to settings when shipped from the factory.

USER Various settings including menus can be made for personal use. For details, see “Preset”

(page 11).

1. Press (PRESET).

The preset menu is displayed.

Press to select the PRESET number, FACTORY, or USER number to

load, and then press (ENTER).

The pre-made settings are loaded and the settings are changed. The selectable settings are as

follows.

• PRESET1 to PRESET5

• FACTORY

• USER1 to USER10

Note

• The “PRESET” menu will disappear after ve seconds have elapsed if no operation is performed.

• is displayed for the USER number that has already been registered.

• When selecting a USER number that has not yet been registered, “No Data” is displayed.

• For information about the main default settings, see “4-1. Main Default Settings” (page 22).

Chapter 1 Basic Adjustment / Setting

1-2. Switching Input Signals

Select the signal input to the monitor and display it on the screen.

1. Press (INPUT).

The “Input Select” menu appears.

Press to select an input signal.

This switches to the selected input signal.

Press (INPUT).

The menu screen exits.

Note

• If you press (INPUT) while the “Input Select” menu is displayed in dual screen mode, the “Input Select” menu

of the subscreen is displayed.

• When RGB / YPBPR is selected, if the color is abnormal, set it correctly with “Input Cong” (page 8) on the

main menu.

• The “Input Select” menu will disappear after ve seconds have elapsed if no operation is performed.

6Chapter 1 Basic Adjustment / Setting

1-3. Using Function Buttons

Execute the functions assigned to the function buttons (F1 ( ), F2 ( ), F3 ( ), F4 ( ) and F5

( )). For information on how to set a function to each button, see “Function” (page 13).

1. Press F1 ( ), F2 ( ), F3 ( ), F4 ( ) or F5 ( ).

The function menu is displayed.

Press the button with the target function set while the function menu is

displayed.

Note

• In dual screen mode, press (INPUT) to select a screen for performing the target function.

• When the setting of “Function Display” (page 13) is “Off”, the “INVALID FUNCTION” message is displayed if

you press a function button that cannot operate.

• When the setting of “Function Display” (page 13) is “Off”, the “UNDEFINED” message is displayed if you press

a function key assigned to “Undef”.

Chapter 2 Advanced Adjustment / Setting

This chapter describes advanced monitor adjustment and setting procedures using the main menu.

2-1. Operation via the Main Menu

1. Menu display

1. Press (MENU).

The main menu is displayed.

2. Press to select the desired item, and then press .

Adjusting / setting

1. Press to select the desired item.

2. Press to set.

If “Next Menu” is displayed for items, press , and a next menu is displayed.

Exiting

1. If you repeatedly press (MENU), the menu screen exits.

8Chapter 2 Advanced Adjustment / Setting

2-2. Individual Functions of Main Menu

●InputCong

Setting for each input terminal.

Function Setting range Description

SDI Main Stream 1

Stream 2

Sets the picture on Main screen for dual-stream SDI

signal. This is also applied to the single screen mode.

SDI Sub Stream 1

Stream 2

Sets the picture on the subscreen for dual-stream SDI

signal.

RGB/YPBPRYPBPR

RGB-VIDEO

RGB-PC

Sets to match the connected signal at the Y/G, PB/B, PR/R

input terminal.

• “YPBPR”

Set to Y, PB/CB, or PR/CR signal.

• “RGB-VIDEO”

Set to RGB signals. Signal decision gives priority to

VIDEO system.

• “RGB-PC”

Set to RGB signals. Signal decision gives priority to

PC system.

HD15 RGB-VIDEO

RGB-PC

Sets to match signal connected to the HD15 input terminal.

• “RGB-VIDEO”

Signal decision gives priority to VIDEO system.

• “RGB-PC”

Signal decision gives priority to PC system.

Sync. Select (RGB) Auto

Sync on Green

VBS

Sets the synchronization signal input method for the RGB

input terminals.

• “Auto”

Automatically switches between SYNC input and

SYNC on G. When synchronized with SYNC input and

SYNC on G, SYNC input is given priority.

• “Sync on Green”

When synchronized with SYNC input and SYNC on G,

select this to synchronize with SYNC on G.

• “VBS”

Select this when connecting by synchronizing the

composite sync (VBS) signal with the SYNC input

terminal. E.g., when a non-synchronous R / G / B

image signal and a VBS signal output device are

connected to the monitor, connect the VBS signal to

the SYNC input terminal, and select VBS.

Chapter 2 Advanced Adjustment / Setting

Function Setting range Description

Sync. Select (HD15) Auto

Sync on Green

Sets the synchronization signal input method for the HD15

input terminal.

• “Auto”

Automatically switches between HD/VD input and

SYNC on G. When HD/VD input and SYNC on G are

synchronous, HD/VD input is given priority.

• “Sync on Green”

When HD/VD input and SYNC on G are synchronous,

select this to synchronize with SYNC on G

Analog

Adjustment

Auto Setup - Automatically adjusts “H Position”, “V Position”, and “Dot

Clock” when the PC signal is input.

H Position 0 to 300 To move screen left and right.

V Position 0 to 100 To move screen up and down.

Dot Clock 0 to 100 When a striped pattern is displayed, adjust so that noise

will decrease when the synchronous striped pattern (noise)

is produced.

Clock Phase 0 to 31 When inputting RGB signals and PC signals, adjust

for ease of viewing if bleeding or blurring of the screen

contour occurs.

Signal Format 4:3

Wide

Sets signal type for unidentiable signals.

10 Chapter 2 Advanced Adjustment / Setting

●VideoCong

Adjustments / settings for image display.

Function Setting

range Description

Color 0 to 100 Adjusts color depth of the image.

Tint 0 to 100 Adjusts skin tones.

Brightness 0 to 100 Adjusts image darkness (black).

Picture 0 to 100 Adjusts image intensity.

Sharpness 0 to 20 Adjusts image contour color denition.

Gamma 1.8 to 2.6

DICOM

Adjusts brightness.

Backlight 0 to 100 Adjusts brightness of backlight. In case of multiple windows,

select the main screen. The setting cannot be changed

when a screen other than the main screen is selected.

Color Temp 6500 K

9300 K

Off

Switches tone of the image.

R Gain 0 to 100 Adjusts the brightness of red in bright portions.

G Gain 0 to 100 Adjusts the brightness of green in bright portions.

B Gain 0 to 100 Adjusts the brightness of blue in bright portions.

R Bias 0 to 100 Adjusts the brightness of red in dark portions.

G Bias 0 to 100 Adjusts the brightness of green in dark portions.

B Bias 0 to 100 Adjusts the brightness of blue in dark portions.

Color Gamut sRGB

Native

Sets the Color Gamut.

Input Range 0 to 255

16 to 235

The dynamic range is modulated in accordance with the

input signals from the DVI-D terminal.

• “0 to 255”

Use this setting when connecting PC format source.

• “16 to 235”

Use this setting when connecting video format source.

NTSC Setup 0

7.5

Select set up level for NTSC signals. Note that the standard

level for NTSC signals varies between countries.

• “0”

Set when the dark parts of the screen are too dark.

(0 IRE)

• “7.5”

Set when the dark parts of the screen are too bright.

(7.5 IRE)

Noise Reduction Off

Light

Middle

Heavy

Select Noise Reduction level for picture.

Andere Handbücher für CuratOR EX3220

Inhaltsverzeichnis

Andere Eizo Monitor Handbücher

Eizo

Eizo FlexScan L660 Bedienungsanleitung

Eizo

Eizo FlexScan S2000 Benutzerhandbuch

Eizo

Eizo FlexScan S2133 Bedienungsanleitung

Eizo

Eizo FLEXSCAN EV2315W - Bedienungsanleitung

Eizo

Eizo FC-2090C Bedienungsanleitung

Eizo

Eizo RadiForce G21-S Bedienungsanleitung

Eizo

Eizo RadiForce RX240 Bedienungsanleitung

Eizo

Eizo FlexScan EV2457 Bedienungsanleitung

Eizo

Eizo FlexScan EV2303W Bedienungsanleitung

Eizo

Eizo ColorEdge CG19 Bedienungsanleitung

Eizo

Eizo FlexScan EV2785-BK Bedienungsanleitung

Eizo

Eizo RadiForce RX320 Bedienungsanleitung

Eizo

Eizo EIZO FlexScan P1700 Bedienungsanleitung

Eizo

Eizo DuraVision FDF2304W-IP Bedienungsanleitung

Eizo

Eizo RadiForce RS210 Bedienungsanleitung

Eizo

Eizo FlexScan T1781 Bedienungsanleitung

Eizo

Eizo ColorEdge CS2400R Bedienungsanleitung

Eizo

Eizo FORIS FS2434 Bedienungsanleitung

Eizo

Eizo FlexScan T966 Bedienungsanleitung

Eizo

Eizo FlexScan EV2333WH Bedienungsanleitung

Eizo

Eizo ColorEdge CX271 Bedienungsanleitung

Eizo

Eizo ColorEdge CS2731 Bedienungsanleitung

Eizo

Eizo RadiForce R22 Bedienungsanleitung

Eizo

Eizo DURAVISION FDX1001 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung