Eizo FlexScan MX300W Bedienungsanleitung
Important
Please read this User’s Manual carefully to
familiarize yourself with safe and effective
usage procedures.
Please retain this manual for future
reference.
FCC Declaration of Conformity................................ 31
SAFETY SYMBOLS ...................................................2
PRECAUTIONS.....................................................3
1. Introduction.............................................................7
1-1. Features ............................................................ 7
1-2. Buttons and Indicators ...................................... 8
1-3. Utility Disk ......................................................... 9
2. Installation.............................................................10
2-1. Environmental Settings ................................... 10
2-2. Making Use of USB (Universal Serial Bus) ..... 12
3. Screen Adjustment and Settings ..........................13
3-1. Basic Operation and Functions ....................... 13
3-2. Color Adjustment............................................. 15
3-3. Power-save Setup ........................................... 18
3-4. Off Timer ......................................................... 19
3-5. Locking the Settings........................................ 19
3-6. Power Indicator Setting ................................... 20
3-7. Displaying Lower Resolutions ......................... 20
3-8. Setting the Orientation of the Adjustment Menu .... 21
3-9. Displaying EIZO logo....................................... 21
4.Troubleshooting .....................................................22
5. Reference .............................................................24
5-1. Attaching an Arm............................................. 24
5-2. Cleaning .......................................................... 25
5-3. Specifications .................................................. 26
5-4. Glossary.......................................................... 29
2
SAFETY SYMBOLS
SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them carefully.
WARNING
Failure to abide by the information in a WARNING may result in serious injury and can
be life threatening.
CAUTION
Failure to abide by the information in a CAUTION may result in moderate injury and/or
propertyor product damage.
Indicates a prohibited action.
Indicates to ground for safety.
Copyright© 2007 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be
reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic,
mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information
confidential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION's receipt
of said information. Although every effort has been made to ensure that this manual provides up-to-date
information, please note that EIZO monitor specifications are subject to change without notice.
Macintosh is registered trademarks of Apple Inc.
VGA is a registered trademark of International Business Machines Corporation.
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards Association.
Windows is a registered trademark of Microsoft Corporation.
PowerManager and RadiCS are trademarks of EIZO NANAO CORPORATION.
ScreenManager, FlexScan and EIZO are registered trademarks of EIZO NANAO CORPORATION
Product specifications may vary depending on the region.
Confirm the specifications in the manual written in the language of the region of purchase.
• It shall be assured that the final system is in compliance to IEC60601-1-1 requirement.
• Power supplied equipment can emit electromagnetic waves, that could influence, limit or result in
malfunction of the monitor.
Install the equipment in a controlled environment, where such effects are avoided.
• This is a monitor intended for use in a medical image system.
PRECAUTIONS
3
PRECAUTIONS
IMPORTANT!
• This product has been adjusted specifically for use in the region to which it was originally shipped.
If operated outside the region to which it was originally shipped, the product may not perform as
stated in the specifications.
This product is designed for use in Japan only and cannot be used in any other countries.
• To ensure personal safety and proper maintenance, please read this section and the caution statements
on the unit (refer to the figure below).
[Location of the Caution Statements]
[Symbol on the Unit]
Symbol Location This symbol indicates
Front Power switch
Touch to turn the monitor’s power on or off.
Rear
Name Plate Alternating current
Rear Alerting electrical hazard
Rear Caution
Refer to SAFETY SYMBOLS section in this manual.
WARNING
If the unit begins to emit smoke, smells like something is burning, or makes
strange noises, disconnect all power connections immediately and contact
your dealer for advice.
Attempting to use a malfunctioning unit may result in fire, electric shock, or
equipment damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.
4
PRECAUTIONS
WARNING
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing covers may
result in fire, electric shock, or equipment damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet or
spillage into the cabinet may result in fire, electric shock, or equipment damage. If an
object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit
checked by a qualified service engineer before using it again.
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or equipment
damage.
If the unit falls, disconnect the power immediately and ask your dealer for advice.
Do not continue using a damaged unit. Using a damaged unit may result in fire or
electric shock.
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
• Do not place outdoors.
• Do not place in the transportation system (ship, aircraft, trains, automobiles,
etc.)
• Do not place in a dusty or humid environment.
• Do not place in a location where the steam comes directly on the screen.
• Do not place near heat generating devices or a humidifier.
• Do not place in an inflammable gas environment.
To avoid danger of suffocation, keep the plastic packing bags away from
babies and children.
Use the enclosed power cord and connect to the standard power outlet of your
country.
Be sure to remain within the rated voltage of the power cord.Not doing so may result
in fire or electric shock.
Power supply: 100-120/200-240 Vac, 50/60 Hz
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Not doing so may cause in fire or electric shock.
Use the correct voltage.
• The unit is designed for use with a specific voltage only. Connection to another
voltage than specified in this User's Manual may cause fire, electric shock, or
equipment damage.
Power supply: 100-120/200-240 Vac, 50/60 Hz
• Do not overload your power circuit, as this may result in fire or electric shock.
OK
PRECAUTIONS
5
WARNING
Handle the power cord with care.
• Do not place the cord underneath the unit or other heavy objects.
• Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may
result in fire or electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user's manual of the arm
stand and install the unit securely.
Not doing so may cause the unit to come unattached, which may result in injury or
equipment damage. When the unit is dropped, please ask your dealer for advice.
Do not continue using a damaged unit. Using a damaged unit may result in fire or
electric shock. When reattaching the tilt stand, please use the same screws and
tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal which leaks from the panel is poisonous if it enters the eyes or
mouth.
If any part of the skin or body comes in direct contact with the panel, please wash
thoroughly. If some physical symptoms result, please consult your doctor.
Lamps contain mercury, dispose according to local, state or federal laws.
CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with
the cord attached is dangerous. It may result in injury.
Carry or place the unit according to the correct specified methods.
• When carrying the unit, grasp and hold firmly as shown in the illustration below.
• Do not unpack or carry the unit only by a single person, since the large size unit
is so heavy.
Dropping the unit may result in injury or equipment damage.
Do not block the ventilation slots on the cabinet.
• Do not place any objects on the ventilation slots.
• Do not install the unit in a closed space.
• Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may result in fire, electric
shock, or equipment damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
6
PRECAUTIONS
CAUTION
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in fire.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric shock.
If you plan to leave the unit unused for an extended period, disconnect the
power cord from the wall socket after turning off the power switch for the
safety and the power conservation.
Notice for this monitor
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a
monitor in lower brightness is recommended.
The LCD panel is manufactured using high-precision technology. However, note that the appearance of any
missing pixels or lit pixels does not indicate damage to the LCD monitor.
Percentage of effective pixels : 99.9994% or higher.
The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker,
please contact your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There
will be prints left on the screen if the pressed image is dark or black. If pressure is repeatedly applied to the
screen, it may deteriorate or damage your LCD panel. Leave the screen white or black to decrease the prints.
When the screen image is changed after displaying the same image for extended periods of time, an
afterimage may appear. Use the screen saver or timer to avoid displaying the same image for extended
periods of time.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew
condensation may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until
dew condensation disappears, otherwise it may cause some damages to it.
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in
damage to the panel. Do not attempt to brush with tissues as this may scratch the LCD panel.
To use the monitor comfortably
An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to
the environmental conditions.
Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
1. Introduction
7
1. Introduction
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
•29.8 inch class wide screen format LCD
•WQXGA (2560 × 1600) display compliant
•HDCP signal (SIGNAL2) compliant
•Dual-display compliant by introducing dual-input system (DVI-D × 2 connectors)
•DVI digital input (TMDS) compliant
•Horizontal scan frequency: 31 - 100 kHz
•Vertical scan frequency: 25.5 - 61 Hz (VGA TEXT: 69 - 71 Hz)
•Resolution: 2560 dots × 1600 lines
•Compatible with frame synchronization mode (59 - 61 Hz)
•Smoothing (soft - sharp) function
•DICOM mode (CAL Switch function)
•CAL Switch function for selecting an optimal calibration mode
•The quality control software "RadiCS LE" (for Windows) used to calibrate the monitor is
included(refer to the EIZO LCD Utility Disk).
•The utility software "ScreenManager Pro for Medical" (for Windows) to control the monitor from
a PC with mouse/keyboard is included (refer to the EIZO LCD Utility Disk).
•Portrait/Landscape display available (rotate 90 degrees clockwise)
Tips
•This monitor supports the Portrait/Landscape display. This function allows you to change the
orientation of the Adjustment menu when using the monitor screen in vertical display position.
(Refer to "3-8. Setting the Orientation of the Adjustment Menu" on page 21.)
•If you use the monitor with“ Portrait” position, the setting may be required to change
depending on the graphics board used in your PC. Refer to the manual of the graphics board for
details.
8
1. Introduction
1-2. Buttons and Indicators
1. Input Signal Selection button
2. Mode button
3. Enter button
4. Control buttons (Left, Down, Up, Right)
5. Power button
6. Power indicator
Indicator status Operation status
Blue The screen is displayed
Orange Power saving
Off Power off
*ScreenManager®is an EIZO's nickname of the Adjustment menu.
Buttons
Adjustment menu
(ScreenManager ®*)
1. Introduction
9
1-3. Utility Disk
An "EIZO LCD Utility Disk" (CD-ROM) is supplied with the monitor. The following table shows the
disk contents and the overview of the application software programs.
Disk contents and software overview
The disk includes a monitor information file, application software programs for adjustment, and User’s
Manual. Refer to "Readme.txt” or the "Readme" file on the disk for software startup procedures or file
access procedures.
Item Overview For Windows For Macintosh
A “Readme.txt” or “Readme” file √ √
Color Profiles
(ICC Profiles)
Color profiles - √
RadiCS LE RadiCS LE is quality control software used to calibrate
the monitor and manage the calibration history.
(A PC must be connected to the monitor with the
supplied USB cable.) Refer to the description later.
√ -
ScreenManager
Pro for Medical
A utility software program to control monitor adjustments
from a PC using its mouse and keyboard.
(A PC must be connected to the monitor with the
supplied USB cable.) Refer to the description later.
√ -
User’s Manual (PDF file)
To use RadiCS LE or ScreenManager Pro for Medical
Refer to the corresponding User's Manual on the CD-ROM disk in order to install and use the software.
When using this software, you will need to connect a PC to the monitor with the supplied USB cable.
For more information refer to the "2-2. Making Use of USB (Universal Serial Bus)" (page 12).
10
2. Installation
2. Installation
2-1. Environmental Settings
Depending upon your operating environment, it may be necessary to set the frequency that corresponds
to your graphics board. If you install it for the first time or change environment, set the monitor.
NOTE
•Factory default settings are for single display mode and Dual Link.
•Use RadiCS/RadiCS LE only in single display mode in landscape orientation. This software cannot be
used with dual display mode or in portrait orientation.
•Refer to the manual of the graphics board.
•These environment described below can be set regardless of whether or not the computer is running.
Displaying Two Screens Simultaneously
It is possible to display two screens on a single monitor at the same time by using one graphics board
with DVI-D2 type output or two graphics boards with DVI-D output on the same computer.
Dual display with 1280 × 1600 resolution is the maximum display size.
How to set
1
Connect the [SIGNAL1] signal input connector and the computer using the
[DD200DL-BK] signal cable.
2
Connect the [SIGNAL2] signal input connector and the computer using the
[FD-C39] signal cable.
After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.
Connectors on the PC Signal cable Connectors on the
monitor
Signal cable (DD200DL-BK) SIGNAL1
Signal cable (FD-C39) SIGNAL2
FD-C39
DD200DL-BK
Andere Handbücher für FlexScan MX300W
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Eizo Monitor Handbücher
Eizo
Eizo FlexScan EV3285 Bedienungsanleitung
Eizo
Eizo DuraVision FDS1921T-GY Bedienungsanleitung
Eizo
Eizo ColorEdge CG232W Bedienungsanleitung
Eizo
Eizo RadiForce RX360 Bedienungsanleitung
Eizo
Eizo FLEXSCAN L367 Bedienungsanleitung
Eizo
Eizo FLEXSCAN L567 Bedienungsanleitung
Eizo
Eizo RadiForce RX 650 Bedienungsanleitung
Eizo
Eizo FlexScan EV2450-BK Bedienungsanleitung
Eizo
Eizo eClient 630L LCD Monitor Integrated Windows-based... Bedienungsanleitung
Eizo
Eizo Radiforce GX550-P Bedienungsanleitung
Eizo
Eizo RadiForce RX240 Bedienungsanleitung
Eizo
Eizo FLEXSCAN T765 - Bedienungsanleitung
Eizo
Eizo COLOREDGE CG301W Benutzerhandbuch
Eizo
Eizo FlexScan EV2795 Bedienungsanleitung
Eizo
Eizo FlexScan MH240W Bedienungsanleitung
Eizo
Eizo DuraVision FDU2101 Benutzerhandbuch
Eizo
Eizo FlexScan S1501 Benutzerhandbuch
Eizo
Eizo FlexScan EV2480-BK Bedienungsanleitung
Eizo
Eizo DuraVision FDF2382WT-A Bedienungsanleitung
Eizo
Eizo DuraVision FDS1904 Bedienungsanleitung
