EKey CV WIEG Bedienungsanleitung

ekey home

OPERATING INSTRUCTIONS

en 01

en│1

English

Translation of the original instructions –ID159/271/0/135

Table of contents

General ..........................................................................................2

Note ...........................................................................................2

Product liability and limitation of liability .........................................2

Warranty and manufacturer'swarranty ............................................2

Notices, symbols and abbreviations...............................................2

Safety information .........................................................................3

Life-threatening danger resulting from electricity .............................3

Safety against tampering ..............................................................3

Product description .......................................................................4

System overview..........................................................................4

Scope of delivery..........................................................................4

Proper use and area of application..................................................4

Wiegand converter .......................................................................5

Configuration tool.........................................................................6

Technical specifications .................................................................7

System setup variants ...................................................................7

variant........................................................................7ekey home

variant 1 .....................................................................8ekey multi

variant 2 .....................................................................8ekey multi

Converter configuration.................................................................9

Preparing for configuration ............................................................9

Carrying out the configuration ..................................................... 11

Configuration examples............................................................... 13

Installation and implementation..................................................15

Resetting default settings............................................................16

Maintenance ................................................................................16

Dismantling and disposal.............................................................16

Declaration of conformity ............................................................16

2│en

General

ekey biometric systems GmbH operates a quality management system in

compliance with EN ISO 9001:2008 and is certified accordingly.

This manual forms a component of the product. Ensure that it is stored in

a safe place. Please contact your dealer for further information about the

product.

Safe operation and function of the machine can be impaired in the

following situations. Liability due to malfunctioning is transferred to the

operator/user in such cases:

□The system devices are not installed, used, maintained and

cleaned in accordance with the instructions;

□The system devices are not used within the scope of proper use;

□Unauthorised modifications are carried out on the system

devices by the operator.

These operating instructions are not subject to updating. Subject to

optical and technical modifications, any liability for errors and misprints

excluded.

Our general terms and conditions apply as valid at the date of purchase.

http://www.ekey.net/files/AGB/dtAGB.pdf.

ekey biometric systems GmbH provides a 24-month warranty for material

or processing defects. This warranty is only valid in the country where the

product was purchased. The product may only be used with original ekey

spare parts and accessories.

Notices, symbols and abbreviations

NOTICE

Denotes additional information and useful tips.

DANGER

Denotes imminent danger which could lead to death or serious

injuries.

ATTENTION

Denotes possible property damage which cannot result in injuries.

Note

Product

liability and

limitation of

liability

Warranty and

manufacturer'

s warranty

en│3

Symbols:

Step-by-step instructions

Reference to sections of this manual

Reference to the mounting instructions

Reference to the wiring diagram

□

Listing without specified order, 1st level

ekey home FS UP

Product names

MENU ITEM

Menu items

Button

Buttons

Abbreviations:

Converter

OEM

Original Equipment Manufacturer

WIEG

Wiegand

Safety information

DANGER

All devices are to be operated with safety extra-lowekey home

voltage (SELV). Only use power supplies rated protection class 2

according to VDE 0140-1.

Failure to do so will result in life-threatening danger due to

electric shock.

Only certified electricians are authorised to carry out the electrical

installation!

Mount the converter in a safe internal area. This prevents tampering from

the outside.

Life-

threatening

danger

resulting from

electricity

Safety against

tampering

4│en

Product description

Fig. 1: Overview of the system

1Third-party Wiegand system

2ekey RS485 bus

3Power supply

4Control panel

5Wiegand converter

6Distributor

7Motorised lock

8Cable transfer

9Finger scanner

□Wiegand converter;

□Mounting set;

□Operating instructions, mounting instructions and wiring

diagram;

□Optional: Finger scanner, control panel, USB converter, software

CD, cable transfer, power supply, connection cable, covers,

etc.).

This product is an accessory for a finger scan access control system. The

device is integrated into the system. The system is comprised of a finger

scanner, control panel, converter and third-party Wiegand system. It is

available in various makeups and component combinations. The converter

converts the internal ekey RS485 protocol to a Wiegand protocol. Data is

transmitted in one direction from the system toekey home or ekey multi

the third-party Wiegand system, and never the other way round.

The system is used to establish a data connection between the ekey home

or system and a third-party Wiegand system.

ekey multi

System

overview

Scope of

delivery

Proper use

and area of

application

en│5

Function of the converter

The converter reads out the sent information at the ekey RS485 bus. It

converts this data into a predefined Wiegand protocol. The converter

sends the generated data to the third-party Wiegand system for further

processing. The predefined data format can be adapted to the third-party

system using the configuration tool and a USB converter.

Controls and visual signals on the converter

1Status LED

2Button

Fig. 2: Overview of

ekey home CV

WIEG RS485

The converter has a status LED for displaying operating statuses. There is

a button for resetting the device to its default settings.

Button operation

Function

Press and hold button for 4

seconds.

Resets default settings.

Table 1: Button operation of ekey home CV WIEG RS485

Display

Description

Status LED flashes green.

Normal mode.

Status LED lights up green.

Data is being sent.

Status LED flashes red.

Default setting/

incorrect connection.

Table 2: Visual signals for ekey home CV WIEG RS485

Wiegand

converter

6│en

Wiegand protocol

The converter is delivered from the factory with the widely-used 26-bit

Wiegand format. The binary Wiegand ID is comprised of even parity,

facility code, user ID and odd parity.

Bit assignment: P FFFFFFFF UUUUUUUUUUUUUUUU P

Letter

Name

Bit length

Binary code

Even parity

0-1

Facility code

0-255

User ID

0-65535

Odd parity

0-1

Table 3: 26-bit Wiegand format

Parity

The parity bit is used to check the sent data.

Facility code (unique device code)

The facility code uniquely defines the finger scanner in the third-party

Wiegand system. The default code is 1. The code can be changed using

the configuration tool.

User ID (unique user number)

The user ID is made up of the user number and the finger number. In an

system, this is calculated as follows:ekey home

User ID * 10 + finger number

e.g.: User number 15 with finger number 7: 15 * 10 + 7 = 157

In an system, the user ID is calculated as follows:ekey multi

(User ID - 1) * 10 + finger number

e.g.: User number 15 with finger number 7: (15 - 1) * 10 + 7 = 147

You can change the length of the Wiegand ID using the configuration tool.

An additional OEM code can also be defined during configuration. This is

added before the facility code.

The configuration tool is integrated in the software. Thisekey FWupdate

can be found on the CD supplied with the and is alsoekey converter USB

available to download from the ekey homepage. Click on the following link

to go to the download area:

http://www.ekey.net/downloads/cat/Software.

NOTICE

An is required in order to establish a connectionekey converter USB

between the Wiegand converter and the PC.

Configuration

tool

en│7

Function of the configuration tool

The configuration tool is used to configure the converter. The ID is

entered in decimal values.

Software requirement

The software only operates on MS Windows operating systems.

Technical specifications

Description

Unit

Value

Supply

VAC/VDC

8-24/8-30

Power input

approx. 1

Temperature range

°C

-25 to+70

Baud rate at RS485

115200

Protection class

Table 4: Technical specifications: ekey home CV WIEG RS485

System setup variants

There are three setup variants for connecting an orekey home ekey multi

system to a third-party Wiegand system.

Fig. 3: Overview of the variantekey home

1Finger scanner

2ekey RS485 bus

3Wiegand converter

4Third-party Wiegand system

5Control panel

6Wiegand connection cable

The variant comprises a finger scanner, a control panel, aekey home

converter and a Wiegand interface to the third-party system. The

converter transmits the sent data from the finger scanner to the third-

party Wiegand system.

ekey home

variant

8│en

Fig. 4: Overview of variant 1ekey multi

1Finger scanner 1-4

2Third-party Wiegand system

3Wiegand connection cable

4ekey RS485 bus

5Wiegand converter

6Control panel

variant 1 comprises up to four finger scanners, a control panel,ekey multi

a converter and a Wiegand interface to the third-party system. The

converter transmits the sent data from each finger scanner to the third-

party Wiegand system. With this system setup, the converter is connected

to a Wiegand interface for the third-party system. The third-party system

must therefore be able to recognise various facility codes.

Fig. 5: Overview of variant 2

ekey multi

1Finger scanner 1-4

2Wiegand converter 1-4

3Third-party Wiegand system

4ekey RS485 bus

5Wiegand connection cable 1-4

6Control panel

variant 2 comprises up to four finger scanners, a control panelekey multi

and the same number of converters and Wiegand interfaces to the third-

party system as there are finger scanners. Each converter transmits the

sent data from one finger scanner to the third-party Wiegand system.

With this system setup, the individual converters are connected to

different Wiegand interfaces for the third-party system.

ekey multi

variant 1

ekey multi

variant 2

en│9

Converter configuration

NOTICE

In an system, the converter only needs to be configured if aekey home

26-bit Wiegand format cannot be used.

NOTICE

In an system, the converter must be configured, as theekey multi

individual finger scanners require a unique facility code. Configuration is

not absolutely essential in the following system setups if a 26-bit Wiegand

format can be used:

□Only one finger scanner is used in the system;

□Only one converter is used in the system and a

distinction between the individual finger scanners does not need to

be made in the third-party Wiegand system. ( variant 1)ekey multi

The following components are required to configure the converter:

□;ekey converter USB

□USB connection cable;

□RS485 connection cable;

□Power supply;

□PC with MS Windows operating system and USB-2.0 interface;

□software with configuration tool.ekey FWupdate

If you have already implemented your system, disconnect it from the

power supply. Dismantle the toekey home converter Wiegand RS485

enable it to be configured.

Preparing for

configuration

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung

eKey CV WIEG Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken