ELAN Lighting PSD 518 Bedienungsanleitung

PSD 518

Thank you for purchasing PSD 518. Every suit has been thoroughly tested and shipped in

perfect condition. Carefully check the shipping carton for damage that may have occurred

during shipping. If the carton appears to be damaged, carefully inspect your unit for any

damage and be sure all accessories necessary to operate the unit has arrived intactly. In

the case damage has been found or parts are missing, please contact the manufacturer

or your dealer for further instructions. Do not return this unit to your dealer without any

warning.

USER’S MANUAL

1. Safety .......................................................................... 3

2. Set Up ......................................................................... 4

3. Operating Instructions ................................................. 4

4. Cleaning ...................................................................... 6

5. Troubleshooting ........................................................... 7

Index

FOR YOUR OWN SAFETY, PLEASE READ

THIS USER MANUAL CAREFULLY BEFORE

POWERING OR INSTALLING. SAVE IT FOR

FUTURE REFERENCE

1. Safety

Warning! To prevent or reduce the risk of

electrical shock or re, do not expose this

unit to rain or moisture.

PLEASE consider that damages caused

by manual modications to the device

are not subject to warranty.

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself; doing

so will void your manufactures warranty. In the unlikely event your unit may require service please contact

the manufacturer or your dealer.

PLEASE recycle the shipping carton when ever possible

To optimise the performance of this product, please read these operating instructions carefully to

familiarise you with the basic operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please keep this manual with the unit, for

future reference.

• To reduce the risk of electrical shock or re, do

not expose this unit to moisture.

• Do not spill water or other liquids into or on to

your unit.

• Be sure that the local power outlet match that of

the required voltage for your unit,

• Do not attempt to operate this unit if the power

cord has been frayed or broken.

• Do not attempt to remove or break o the

ground prong from the electrical cord. This

prong is used to reduce the risk of electrical

shock and re in case of an internal short.

• Disconnect from main power before making any

type of connection.

• Do not remove the cover under any conditions.

There are user serviceable parts inside.

• Never operate this unit when its rear cover is

removed.

• Never plug this unit into a dimmer pack.

• Always be sure to mount this unit in an area

that will allow proper ventilation. Allow about 6”

(15cm) between this device and a wall.

• Do not attempt to operate this unit, if it

becomes damaged.

• This unit is intended for indoor use only; use of

this product outdoors voids all warranties.

• During long periods of non-use, disconnect the

units main power.

• Always mount this unit un safe and stable

matter.

• Power-supply cords should be routed so that

they are not likely to be walked on or pinched

by items placed upon or against them, paying

particular attention to the point they exit from

the unit.

• Cleaning unit should be cleaned only as

recommended by the manufacturer. See

‘Cleaning” for details.

• Heat –The appliance should be situated away

from heat sources such as radiators, heat

registers, stoves, or other appliances (including

ampliers) that produce heat.

• The unit should be serviced by qualied service

personnel when:

A. The power-supply cord or the plug has been

damaged.

B. Objects have fallen, or liquid has been

spilled into the appliance.

C. The appliance has been exposed to rain or

water.

D. The appliance does not appear to operate

normally or exhibits s marked change in

performance.

General Instructions

Safety Precautions

2. Set Up

3. Operating Instructions

Before plugging your unit in, be sure the source voltage in your area matches the voltage required for your

every suit. Every unit is available in 100v and 240v version. Because line voltage may vary from venue to

venue, you should be sure your unit voltage matches the wall outlet voltage before attempting to operate

you unit.

To ensure proper DMX data transmission, when using several DMX units try to use the shortest cable path

possible. The order in which units are connected in a DMX line does not inuence the DMX addressing.

For example; a unit assigned a DMX address of 1 may be placed anywhere in a DMX line, at the

beginning, at the end, or anywhere in the middle. When a unit is assigned a DMX address of 1, the DMX

controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX

chain.

You can use the suit in 3 ways:

1. Auto Mode-The unit will automatically chase through the dierent colors.

2. DMX control mode – This function will allow you to control each individual units traits with a standard

DMX 512 controller.

3. Master-slave mode – One unit will work as the master in the one of the above three modes, other

units in the chain will work in synchronization towards the master.

• Multi-Colors

• Master/Slave synchronization

• Color Strobe

• LED operation menu with function buttons

• Electronic Dimming 0-100%

• DMX-512 protocol

• Daisy Chain Units Together in DMX Mode

There are four touch buttons under the LED display: Menu, Up,

Down, Enter. Normally, the LED will display the current DMX ad-

dress code of the xture. At this time, presses up and down to

choose the functions you want

LED Operation Menu: LED screen with four touch buttons (MENU, UP, DOWN and ENTER).

Press MENU to return to the upper menu; Press UP or DOWN to scroll into the menu options or to adjust

the values. Press ENTER to conrm.

Features

Power Supply

DMX Linking

Touch Buttons

Led Display

DMX Setup

After power on and initialization, it will show the status before last power o. Then, the unit is ready for

setting and working. Please see the following table for setting information.

Main Menu Value Functions

d001 001-511 To set the DMX address code

CF01 01-99 Fade in & out (slow to fast)

CC01 01-99 Change Color (slow to fast)

C501 01-99 Macro

dENo / Auto run

bEAr / No Function

SLAU / Master and slave

d001 5 Channels RGBWA

d.001 9 Channels RGBWA, Dimmer, Strobe, Macro,

Auto Run

DMX Modes

d001

d.001

Channel Function Value

1 R 0-255

2 G 0-255

3 B 0-255

4 W 0-255

5 A 0-255

Channel Function Value

1 R R 0-255

2 G G 0-255

3 B B 0-255

4 W W 0-255

(5CH)

(9CH)

5 A A 0-255

6 Dimmer Dimmer (all o to all on) 0-255

7 Strobe No function 0-1

Strobe (slow to fast） 2-255

8 Marco

R 0-32

R+G (R same, G bri-

ghter) 33-65

Co R+G (G same, R

less bright) 66-96

G+B (G same, B bri-

ghter) 97-129

G+B (B same, G less

bright) 130-160

R+B (B same, R brigh-

ter) 161-191

R+G+B (R and B are

same, G brighter) 192-224

R+G+B+W+A (R, G

and B are same, W and

A brighter)

225-254

All on 255

9 Auto run

No function 0-9

R+B 10-63

Co R+G 64-127

G+B 128-191

R+G+B+W+A 192-255

Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried out

periodically to optimize light output.

1. Use normal glass cleaner and a soft cloth to wipe o the outside casing.

2. Clean the external optics with glass cleaner and a soft cloth every 20 days.

3. Always be sure to dry all parts completely before plugging the unit back in.

Cleaning frequency depends on the environment in which the unit operates (i.e. smoke, fog residue, dust,

dew).

4. Cleaning

5. Troubleshooting

Listed below are a few common problems the user may encounter, with solutions.

Unit not responding to DMX:

Check that the DMX cables are connected properly and are wired correctly (pin 3 is “hot”; on some other

DMX devices pin 5 may be “hot”). Also, check that all cables are connected to the right connectors; it

does matter which way the inputs and outputs are connected.

For any additional inquiries, please contact your local dealer for product support.

IMPORTANT INFORMATION!

In order to optimize the recovery and recycling of the materials that old appliances con-

tain and reduce the impact on human health and the environment, please make sure that

this product is recycled at the end of its life.

Importer:

ACSON COMERCIAL

C/Pallars, 405

08019 Barcelona

www.acson.com

[email protected]

PLEASE Note: All information is subject to change without notice.

Inhaltsverzeichnis

Andere ELAN Lighting DJ-Equipment Handbücher

ELAN Lighting

ELAN Lighting CITYCOLOR-551-UV Bedienungsanleitung

ELAN Lighting

ELAN Lighting PSD-218 Bedienungsanleitung

ELAN Lighting

ELAN Lighting CABLED-150-BEAM Bedienungsanleitung

ELAN Lighting

ELAN Lighting CABLED-150-SPOT-MKII Bedienungsanleitung

ELAN Lighting

ELAN Lighting ARC-418 Bedienungsanleitung

ELAN Lighting

ELAN Lighting PSD-312 Bedienungsanleitung

ELAN Lighting

ELAN Lighting PSD 512 II Bedienungsanleitung

ELAN Lighting

ELAN Lighting Classicbar-661 Bedienungsanleitung

ELAN Lighting

ELAN Lighting A2500RGB Bedienungsanleitung

ELAN Lighting

ELAN Lighting MYTHIC Bedienungsanleitung

ELAN Lighting

ELAN Lighting CABLED-60S-MINI Bedienungsanleitung

ELAN Lighting

ELAN Lighting LED-BLINDER-260-RGBW Bedienungsanleitung

ELAN Lighting

ELAN Lighting CAB-5R-BEAM Bedienungsanleitung

ELAN Lighting

ELAN Lighting CAB-330-MULTI Bedienungsanleitung

ELAN Lighting

ELAN Lighting CLASSICBAR 1831 MATRIX Bedienungsanleitung

ELAN Lighting

ELAN Lighting CITYCOLOR-551-IP Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung