Elation Design Spot 575B Bedienungsanleitung

Rev. 11/24/2009

Design Spot 575B

Elation Professional

6122 S. Eastern Ave

Los Angeles, Ca. 90040

Design Spot 575B™

©Elation Professional, Los Angeles CA. 2 Design Spot 575B™

Design Spot 575B™

©Elation Professional, Los Angeles CA. 3 Design Spot 575B™

CONTENTS

1. General Information……………………………………………………………………… 4

a. Introduction………………………………………………………………………. 4

b. Customer Support…………………………………………….………………… 3

c. Warranty Registration……………………………………………………..……. 5

d. Discharge Lamp Warning………………………………………………………. 5

2. Safety Instructions………………………………………………………........…………. 7

3. Features……………………………………………………………………………………9

4. General Guidelines………………………………………………………………………. 10

5. Lamp Installation…………………………………………………………………………. 11

a. Lamp installation…………………………………………………….………….. 11

b. Lamp optimization……………………………………………………..…………12

6. Mounting and Installation………………………………………………………….……. 14

a. Mounting Positions……………………………………………………………… 14

b. Mounting Points…………………………………………………………………. 15

c. Securing………………………………………………………………………….. 16

7. Understanding DMX……………………………………………………………………... 17

a. DMX Linking……..………………………………………………………………. 17

b. DMX Cable Requirements..……………………………………………………. 17

c. DMX Termination………..………………………………………………………. 19

d. DMX Addressing………………………………………………………………… 19

8. Fixture Menu……………………………………………………………………………… 21

a. Menu functions………………………………………………………………….. 23

9. Menu Functions.…………………………………………………………………………. 24

10. DMX Addressing…………………………………………………………………………. 32

11. Operation…………………………………………………………………………………. 34

12. Working with Built-In Programs……………………………………………………...…. 36

13. DMX Channel Traits………………………………………………………………..….… 39

14. Fuse Replacement………………………………………………………………………..43

15. Error Codes………………………………………………………………………………..44

16. Cleaning and Maintenance……………………………………………………………… 47

17. Warranty…………………………………………………………………………………... 48

18. Photometric Data………………………………………………………………………… 50

19. Gobo Patterns……………………………………………………………..……………... 51

20. Dimensional Drawings………………………………………………….……………….. 52

21. Circuit Schematic………...………………………………………………………………. 53

22. Technical Specifications…………………………………………...………….………… 54

Design Spot 575B™

©Elation Professional, Los Angeles CA. 4 Design Spot 575B™

1. GENERAL INFORMATION

INTRODUCTION: Congratulations, you have just purchased one of the most innovative and

reliable lighting fixtures on the market today! The Design Spot 575B,™ has been designed to

perform reliably for years when the guidelines in this booklet are followed. Please read and

understand the instructions in this manual carefully and thoroughly before attempting to

operate this unit. These instructions contain important information regarding safety during

use and maintenance.

UNPACKING: Thank you for purchasing the Design Spot 575B™ by Elation Professional

Every Design Spot 575B™ has been thoroughly tested and has been shipped in perfect

operating condition. Carefully check the shipping carton for damage that may have occurred

during shipping. If the carton appears to be damaged, carefully inspect your unit for damage

and be sure all accessories necessary to operate the unit have arrived intact. In the event

damage has been found or parts are missing, please contact our customer support team for

further instructions. Please do not return this unit to your dealer without first contacting

customer support at the number listed below.

CUSTOMER SUPPORT: Elation Professional

provides a customer support line, to provide

set up help and to answer any question should you encounter problems during your set up or

initial operation. You may also visit us on the web at www.elationlighting.com for any

comments or suggestions. For service related issue please contact Elation Professional

Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time.

Voice: (323) 582-3322

Fax: (323) 832-9142

E-mail: sup[email protected]

Forum: www.ElationLighting.com/forum

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to

rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs

yourself, doing so will void your manufactures warranty.

Design Spot 575B™

©Elation Professional, Los Angeles CA. 5 Design Spot 575B™

Please do not discard the shipping carton in the trash, keep for warranty repair. Please

recycle whenever possible.

WARRANTY REGISTRATION: The Design Spot 575B™ carries a two year (730 days)

limited warranty. Please fill out the enclosed warranty card to validate your purchase. All

returned service items whether under warranty or not, must be freight pre-paid and

accompany a return authorization (R.A.) number. The R.A. number must be clearly written on

the outside of the return package. A brief description of the problem as well as the R.A.

number must also be written down on a piece of paper and included in the shipping container.

If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Items

returned without a R.A. number clearly marked on the outside of the package will be refused

and returned at customer’s expense. You may obtain a R.A. number by contacting customer

support at (323) 213-4593.

DISCHARGE LAMP WARNING: This fixture is fitted with a discharge

lamp, which is highly susceptible to damage if improperly handled.

Never touch the lamp with your bare hands, as the oil from your hands

will shorten lamp life. Also, never move the fixture until the lamp has

had ample time to cool. Remember, lamps are not covered under

warranty conditions.

UV RADIATION: This fixture emits intense UV radiation, which is harmful to the eyes and

skin. The intense luminance of the lamp can cause severe damage to the retina. Never

operate this fixture with the protective covers removed, these covers have been specially

designed to shield against UV radiation.

Epileptic Warning: Those suffering from epilepsy should avoid looking directly into the lamp

at all times.

Avoid switching the fixture on and off repeatedly in short intervals, as this will reduce lamp life

and intensity.

To achieve the intensity associated with discharge lamps, these lamps use a gas sealed in a

Design Spot 575B™

©Elation Professional, Los Angeles CA. 6 Design Spot 575B™

high-pressure environment to emit a brilliant output. Due to the high pressure involved with

the construction of the lamp, the lamp may explode during prolonged extensive use. This risk

is increased with age; added care is encouraged when dealing with older lamps. Thus, lamp

should always be replaced at the end of their recommended duty cycle. Extreme caution

should be used when operated this or any fixture fitted with a gas discharge lamp.

Never open this fixture while in use!

During the initial operation of this fixture, a light smoke or smell may emit from the interior of

the fixture. This is a normal process and is caused by excess paint in the interior of the casing

burning off from the heat associated with the lamp and will decrease gradually over time.

This device falls under protection-class 1. Therefore it is essential that the device be

grounded properly.

Only qualified personnel should perform all electrical connections.

Be sure the available voltage matches the voltage requirements of the unit.

Be sure the power cord is never crimped or damaged. If the power cord is damaged, replace

it immediately with a new one of similar power rating.

Always disconnect from main power before performing any type of service or any cleaning

procedure.

Only handle the power cord by the plug. Never pull out the plug by tugging the wire portion of

the cord.

Please be aware that damages caused by manual modifications to the device are not

subject to warranty.

Design Spot 575B™

©Elation Professional, Los Angeles CA. 7 Design Spot 575B™

2. SAFETY INSTRUCTIONS

The Design Spot 575B™ is an extremely sophisticated piece of

electronic equipment. To guarantee a smooth operation, it is

important to follow the guidelines in this manual. The

manufacturer of this device will not accept responsibility for

damages resulting from the misuse of this fixture due to the

disregard of the information printed in this manual.

1. Always be sure that the fan and the air inlets remain clean and are never blocked.

Allow about 6” (15cm) between this fixture and other devices or a wall to allow for

proper cooling.

2. Never touch the fixture during normal operation. This can cause severe personal

injuries and/or damage to the fixture.

3. Be sure to unplug the Design Spot 575B™ from the power outlet before performing

any service related issues.

4. Lamp Replacement; Allow at least 30 minutes after disconnecting main power

before you open the Design Spot 575B™. To prevent personal injury, never touch

the lamp if you are not absolutely sure it has cooled.

5. Never look directly into the lamp beam. You risk injury to your retina, which may

induce blindness.

6. Be sure to track and record the lamp running time. The lamp should be changed at

the end of the specified lamp life, regardless of lamp output. You may also have to

change the lamp if it shows any deformations or damage. The same is with all glass

components, color filters, lenses and mirrors.

7. For safe operation, follow the Installation guide described in chapter five of this

manual. Operating the Design Spot 575B™ without suited safety aids such as

safety cables or clamps can increase the risk of damage and/or personal injury.

8. Qualified and certified personnel should only perform installation.

9. When mounting this fixture, use only the original rigging parts included with this

fixture. Any structural modification will void the original manufactures warranty and

Design Spot 575B™

©Elation Professional, Los Angeles CA. 8 Design Spot 575B™

may increase the risk of damage and/or personal injury.

10. To reduce the risk of fire or electric shock, do not expose this fixture to rain or

moisture.

11. Do not attempt to operate this fixture if the power cord has become damaged or

frayed.

Important Notice: Damages resulting from the disregard of safety and general user

instructions found in this user manual are not subject to any warranty claims.

Design Spot 575B™

©Elation Professional, Los Angeles CA. 9 Design Spot 575B™

3. FEATURES

•Pan 630°or 540˚ (User selectable) / Tilt 265°

•Built-In Macros (Gobo, Prism)

•3 operation mode: DMX Controlled, Stand-Alone or Sound Activated

•Color Wheel: 8 colors plus white (including UV, CTC, and CTO filters)

•Easy to Navigate On-Board LCD Menu (may be turned 180°)

•Two Gobos Wheels:

oWheel 1) Rotating gobo wheel with 6 rotating gobos plus open, all gobos can be

easily replaceable and gobo indexing

oWheel 2) Fixed gobo wheel with 6 rotating gobos plus open

•Strobe Effect: 0~10 flashes per second or random strobe

•Motorized Focus (Near to Far)

•Prism and Prism Rotation, with 16 prism macros (Indexable)

•Bright Phillips MSR 575/2 Lamp (575w / 7200K / 1000Hrs / 43,000Lm)

•Linear Dimmer from 0%~100%

•RDMX (Remote DMX addressing from any DMX console)

•Auto test for all functions

•Automatic Pan/Tilt Correction

•Built-in Iris (5% ~ 100% - Seamless), with Iris Pulse Effect

•Glass Dichroic Reflector for Even Lamp Output

•USITT DMX-512 Compliant

o15 DMX Channels (16bit Operation)

o13 DMX Channels (8bit Operation)

o20 DMX Channels (Extended)

•10 User Assignable Program Presets - Internal Program: Edit and save programs to

the incorporated EPROM. Maximum of 64 scenes.

Design Spot 575B™

©Elation Professional, Los Angeles CA. 10 Design Spot 575B™

4. GENERAL GUIDELINES

This fixture is a professional lighting effect designed for use on stage, in nightclubs, in

theatres, etc. Do not attempt operation or installation without a proper knowledge on how to

do so.

This fixture was designed for indoor use only.

Consistent operational breaks may ensure that the fixture will function properly for many

years to come.

Do not shake the fixture around. Avoid brute force when installing or operating the device.

While choosing an installation location, please be sure that the fixture will not be exposed to

extreme heat, moisture or dust. The minimum distance between the fixture and a wall or flat

surface should be at least 0.5 meter (about 1.5ft).

Always install the fixture with an appropriate safety cable. When installing the fixture in a

suspended environment always be sure to use mounting hardware no less than M10 x 25

mm, also be sure the hardware is insert in the pre-arranged screw holes in the base of the

fixture.

When using the quick release “Omega” cam-lock system, be sure the four quick lock

fasteners are locked in the quick lock holes correctly.

Do not attempt to operate this fixture until you have familiarized yourself with its functions.

Do not permit operation by persons not qualified for operating this type of theatrical fixture,

most damages are the result of operations by nonprofessionals.

If possible, please use the original packaging to transport the fixture in for service.

Inhaltsverzeichnis

Andere Elation Leuchte Handbücher

Elation

Elation Vision Scan 250 Bedienungsanleitung

Elation

Elation Color Spot 575 Bedienungsanleitung

Elation

Elation ProTron LED Bedienungsanleitung

Elation

Elation ELED QA Strip Bedienungsanleitung

Elation

Elation PRS022 Bedienungsanleitung

Elation

Elation TVL1000-II Bedienungsanleitung

Elation

Elation Platinum Beam 5R Extreme Bedienungsanleitung

Elation

Elation FUZ035 Bedienungsanleitung

Elation

Elation ELAR EX TRIBAR Bedienungsanleitung

Elation

Elation TVL F1WW Bedienungsanleitung

Elation

Elation ELAR DW BRICK Bedienungsanleitung

Elation

Elation PROTEUS HYBRID Bedienungsanleitung

Elation

Elation ELAR TRI PAR IP Bedienungsanleitung

Elation

Elation E SPOT III Bedienungsanleitung

Elation

Elation 60TM Bedienungsanleitung

Elation

Elation ELAR 180 PRO RGBAW Bedienungsanleitung

Elation

Elation Power Spot 575IE II Bedienungsanleitung

Elation

Elation COLOUR CHORUS 48 Bedienungsanleitung

Elation

Elation FUZE SFX WH Bedienungsanleitung

Elation

Elation FUZE PENDANT Bedienungsanleitung

Elation

Elation ZW19 Bedienungsanleitung

Elation

Elation PLATINUM WASH 16R PRO Bedienungsanleitung

Elation

Elation COLOUR PENDANT Bedienungsanleitung

Elation

Elation ACL BAR Bedienungsanleitung

Beliebte Leuchte Handbücher anderer Marken

Emos

Emos CLASSIC ZY1431T Bedienungsanleitung

Westinghouse

Westinghouse Outdoor Lighting Fixture Bedienungsanleitung

Hedler

Hedler C 12 silent Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Puck: CSI Bedienungsanleitung

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Bedienungsanleitung

Lightmaxx

Lightmaxx Shaft 5R Bedienungsanleitung

Triarch

Triarch 31083 Bedienungsanleitung

Philips

Philips 32614 Series Bedienungsanleitung

IKEA

IKEA TIVED Bedienungsanleitung

Lightolier

Lightolier LP200 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Bedienungsanleitung

Martin

Martin MAC 250 Krypton Bedienungsanleitung

Cooper Lighting

Cooper Lighting Halo L3232E Bedienungsanleitung

Stageline

Stageline ODW-2410RGBW Bedienungsanleitung

Light Sky

Light Sky Tornado Series Bedienungsanleitung

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung

Lightolier

Lightolier Lytespan 83ED17S Bedienungsanleitung

Lightolier

Lightolier Calculite CS8226 Bedienungsanleitung