ELCOM Uniq Tablet ll Bedienungsanleitung

Uniq Tablet ll 12.2”

User Manual

version 1.0

This manual was not subject to any language revision.

This manual or any part of it may not be copied, reproduced or otherwise distributed

without the publisher‘s consent.

CONTENTS

IMPORTANT NOTICES .............................................................................................................04

CONFORMITY DECLARATION.................................................................................................05

KEY LAYOUT AND DEFINITION ...............................................................................................06

USING THE DEVICE.................................................................................................................. 07

BEFORE USING THE DEVICE.................................................................................................. 10

LOGGING ON TO THE OPERATING SYSTEM........................................................................ 10

SWITCHING OFF....................................................................................................................... 10

RESTARTING ............................................................................................................................. 11

CONTROLLING.......................................................................................................................... 11

CARE........................................................................................................................................... 12

12.2” INDUSTRIAL GRADE LIGHTWEIGHT PORTABLE

RUGGED UNIQ TABLET ll

Thank you for your choosing the new Uniq tablet ll.

This guide serves to enable users to get to know and familiar with our product as soon as

possible. Here we have made a brief introduction to the key layout and definitions in figures

and words. And a brief explain for the basic operating functions.

IMPORTANT NOTICES

Please pay attention to the following notices. They will help you avoid possible damage to the device and

potential injury which could result from improper use of the device. With damage to the device caused by

non-observance of the procedures mentioned in these notices, the legal warranty expires due to improper

handling with the product.

• The device must be under permanent supervision while “ON“ or in “STAND BY“ mode until it is turned

“OFF“ by the central switch and disconnected from the electrical system.

• Do not leave the device unattended while charging.

• Use only the power adapter and cable approved by ELCOM. Unauthorized adapters or cables can cause

batteries to explode or damage the device.

• Improper adapter connection can seriously damage the device. Any damage caused by misuse is not

covered under warranty.

• Do not remove the battery before disconnecting the power adapter. This could damage the device.

• Do not charge the device when the power cord is damaged or if the electrical outlet is not grounded.

This may cause electric shock or fire.

• If the device overheats, starts to smoke, makes strange noises or strange smells, immediately turn off

the main power switch and unplug the device.

• Do not bend the power cord or place heavy objects on it. Stepping on the power cord or its disruption

with heavy object could result in electric shock or fire.

• During a storm or when the device is out of service for longer, unplug the power adapter from the

electrical outlet to prevent electric shock or fire.

• Install the product in a place where it will not be exposed to direct sunlight, unusual changes in tem-

perature (below 0°C and over 35°C) or high humidity. Installation in an unsuitable place could cause

damage to the casing and electrical components.

• Upon carrying the product from a cool environment to a warm one, or vice versa, do not switch it on

for at least 30 minutes.

• The product should be operated by a person with wet hands.

• Clean the external surface with a soft, dry cloth. Never use caustic cleaning agents. The use of such

chemicals could lead to damage to the product. Do not clean the product with sprayed water and do

not submerge the product in water.

• If the product is not working properly, take it to an authorized service center technician. Do not attempt

to repair the product yourself. Do not open the product!

• Use only the AC/DC adapter provided or an adapter recommended by an authorized dealer. The use of

other types of adapters may result in damage to the adapter or the product. First connect the power

cable to the Uniq PC, and only afterwards to the power source!

• Notice: The adapter is designated for interior use only!

• The use of sharp objects for operating the touch panel can cause serious damage or destroy the touch

panel.

• Electronic equipment producing interference, connected in the same power circuit, can cause the im-

proper functioning of the device. In such a case, use special anti-jamming aids recommended by the

producer.

• To completely disconnect the device from the electrical network, unplug the AC/DC adapter

from its electrical outlet.

• If the device is used in ways different than those described in these instructions, the dealer

cannot be responsible for any possible damage that may result.

• A symbol (a crossed-out waste basket) on the product or on its packaging indicates that

this product, upon completion of its use, should not be treated as common household waste.

Instead it should be handed over to a special take-back scheme for the recycling of electrical

equipment and electronic components. By ensuring the proper disposal of this product, you

will help preserve natural resources and will help prevent potential negative consequences on the

environment and on human health.

• The product contributes to environmental protection through the use of lead-free technology during

its production.

WARNING:

ELCOM notifies owners of the Uniq PC 190 (KD) device, that in case of intervention into the BIOS part and

subsequent system damage, the claim for warranty repair will be rejected. An owner will be obligated to

refund all costs associated with the device repair.

CONFORMITY DECLARATION

UNIQ Tablet ll meets the requirements of the directives for the European Union market. The complete

conformity declaration is available on the address of manufacturer: ELCOM, spoločnosť s ručením

obmedzeným, Prešov, Jesenná 2695/26, 080 01 Prešov, Slovensko.

Operation of device with built-in WiFi/3G module is possible under the conditions of the general license

issued by the national frequency regulatory body.

BRIEF INTRODUCTION

1. Device brief introduction

Product features: this product is 12.2” industrial grade lightweight portable rugged tablet

pc, meet international VESA desktop, cantilever type install, at the same time Equip with

a keyboard accessory, This is a 2 in 1 combined reinforcement laptop, with handle, easy to

take. Plentiful functions on whole product: 1D/2D configurations, NFC, GPS,WIFI,3G,LTE. Can

meet the needs of the vast majority of application scenarios.

2. Use of the previous note

(1), There will be explosion dangerous if use wrong model battery to replace, it must use

original battery.

(2), Avoid to drop machine on the floor or other strong shocks.

(3), Do not long-term use it in under cooling, over heating (<55 Centigrade),too wet, dusty

environment, do not exposure this machine in the sun for a long time .

(4), Try to avoid using it in Strong magnetic, strong electrostatic environment.

(5), Once the machine drop into water or other liquid, check the port immediately, also wipe

the machine and dry it for use.

(6), Do not use any Contain chemical cleaners, or other liquid to wipe this machine, to avoid

to cause damages because of Corrosion and damp, if it is necessary to clean, please use dry

soft cloth or paper towel to wipe

(7), Our company not responsible for data missing or deletion because of Human abnormal

hardware and software operation, maintenance or other accidents, also not responsible for

other losses for this reason.

(8), Please back-up copy your important data anytime to avoid missing.

(9), Please do not disassembly the machine by yourself, or will Lost the warranty rights.

(10), This product supports Most of the mainstream brands 3G DONGLE EVDO, 3G Dongle

may have difference, suggest you test it ok and then purchse

KEY LAYOUT AND DEFINITION

Earphone Jack: the jack support outputs the audio signal to the loudspeaker or Headset .

Micro USB/Type C port: you can read data out through this USB.

HDMI: High-Definition Multimedia Interface.

USB PORT: Standard USB 2.0/USB3.0 port, you can read data out through this USB.

RJ45 PORT: Use for LAN and ADSL Broadband Internet cable connection among user’s

network equipment.

Charging port: charge your tablet pc through DC port.

KEY: Reserve key for customer customized .

Voice sound -/ voice sound+: reduce / increase the volume .

Power button: to start or close touch screen panel. You can also let the computer to sleep or

wake up from hibernation mode.

Front camera: camera, video.

Touch screen: Corning Gorilla Glass , support Gloves/wet hands touch.

The docking interface: This interface and positioning hole to cooperate, convenient to align-

ment and steady the link tablet with a keyboard or docking.

DB9 port: Type D data interface connector, use for connect the port standard of electronic

device .

Removable battery: 13000mAh/3.7V big battery.

Rear camera: camera, video.

One-dimensional code scanner/ two-dimensional code scanner: to support one / two-di-

mensional code scanning.

Scan button: scan switch on/off shortcut key.

Speaker: built-in speaker, allow you can hear the sound without additional link equipmenter

Display 12.2”

Type of display IPS

Resolution 1920 x 1200 px

Aspect ratio 8 : 5

Horizontal angle of view 178°

Vertical angle of view 178°

CPU Intel Cherry Trail Z8300

RAM 4GB DDR3

Data storage eMMc 64GB

WiFi Yes

Bluetooth Yes

3G module Yes

GPS Yes

USB 2 x USB 2.0, 1 x USB 3.0

Audio in/out Yes

Microphone Yes (built-in)

Camera 5 Mpix (rear) + 2 Mpix (front)

Speakers Yes

Ports RS-232, RJ 45, mini HDMI

IP level IP65

Cooling Fanless (passive)

SIM card slot Yes

Dock connector Yes

G-sensor Yes

L-sensor Yes

Rechargeable battery 13 000 mAh / 3,7 V

AC Adapter Yes

Mounting Table stand (optional), wall mount (optional), arm

holder (optional), VESA 75 (optional)

Dimensions (L x W x D) 209,4 x 282,1 x 30,1 mm mm

Weight 1,6 kg with battery

Relative humidity 5% ~ 95% (non-condensing)

Operation temperature -20°C to 60°C

OS Compatibility Windows 10, Android 5.1

Table 1.0 Technical parameters and available configurations of the Uniq Tablet ll 12.2”

BEFORE USING THE DEVICE

Prior to using the device it is necessary to connect the power adapter if is the battery is dis-

charged. Connect the power cable to the power adapter. Connect the power cable plug from

the power adapter to the power connector. Plug the power cable into the electrical power

outlet (220V, 50 Hz).

Note: Working hours of the battery depends on the degree of processor load, power profile

selected in the operation, activities.

Note: Before using the Uniq Tablet ll it is a good idea to look over the sections devoted to

methods of controlling the device.

BEFORE USING THE DEVICE

After connecting to the power source press the POWER button on the front of the device for

approximately 3 seconds. The device switches on, which is indicated by the blue LED on the

front of the panel. After performing a quick system test, the operating system is launched.

LOGGING ON TO THE OPERATING SYSTEM

The welcome screen of the operating system differs according to its type and version. De-

pending on the type of the operating system it is possible that your operating system will

request the entry of a user name and password for the user account.

Enter the required information for logging on to the user account and press Enter or click the

button for logging on. If you are creating your own user account with a password, please re-

member the password, as without it you will not be able to log on to your account.

Note: If during logon procedure the computer does not respond to the touch panel controls,

connect an external keyboard and mouse, which will allow you to log on and subse

quently calibrate the touch panel according to the process described in the section

“Calibrating the touch panel“.

SWITCHING OFF

The device can be switched off according to the standard procedure of the operating system or by

touching the POWER button the Uniq Tablet ll go to sleep mode.

Inhaltsverzeichnis

Andere ELCOM Tablette Handbücher

ELCOM

ELCOM Uniq Tablet UT10 Bedienungsanleitung

Beliebte Tablette Handbücher anderer Marken

Laser

Laser MID-1060 Benutzerhandbuch

MUNBYN

MUNBYN IRT09J Kurzanleitung

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz Bedienungsanleitung

Dell

Dell Latitude ST Betriebsanleitung

Venturer

Venturer WT9L11 Bedienungsanleitung

EDUGEAR

EDUGEAR UnoBook Bedienungsanleitung

Philips

Philips PI3210G/58 Bedienungsanleitung

TwinMOS

TwinMOS TwinTAB-T102D1 Bedienungsanleitung

Archos

Archos 9.7 xenon Bedienungsanleitung

HANNspree

HANNspree HANNspad SN70T3 Bedienungsanleitung

Philips

Philips PI3105W2/55 Bedienungsanleitung

Zeki

Zeki TBDB763B Bedienungsanleitung

Ricoh

Ricoh eQuill Bedienungsanleitung

DT Research

DT Research DT365CT Montageanleitung

MaxWest

MaxWest Nitro Phablet 9 Bedienungsanleitung

LG LG-V935 Bedienungsanleitung

Aaeon

Aaeon RTC-1000A1 Bedienungsanleitung

Trevi

Trevi TAB 9 C8 Bedienungsanleitung