Electcom ELC-1910 Bedienungsanleitung
2.0 CH DVD HDMI PLAYER
Instruction Manual
Important safety instructions: read carefully and keep for future reference.
Features
Thank you for purchasing our product. Please read this manual carefully before
connection and operation. Please keep this manual for future reference.
DVD player is a new generation home player which can produce high quality
video and audio. Its performance is much better that of any previous home
video playing equipment. As the best signal source of home theatre system, It
will give you the uppermost enjoyment !
MPEG4, DIVX, PCM, MPEG etc.digital audio decoder
HHi, 96 kHz/24bit audio digital processor.
Software intelligent upgrade.
High-resolution component video output future video equipment
HDMI output, support 720P.1080I.1080P.
Super compatible with DIVX/DVD/DVD+RW/DVD-RW/DVD+R/DVD-
R/HDCD/VCD/CD/CD-R/MP3/MP4/KODAK/PICTURE.
Latest the forth generation servo, decoding on single-chip technology,
high reliability and stability and super error correction.
For Your Attention
IMPORTANT NOTES:
Please read through the manual carefully before connecting and operation.
Do not open the cover or touch any internal components for non-professional.
Turn off the power when the unit is not being used. (Unplug the power cord if
the unit is not used for a long time.)
Do not expose the unit to direct sunlight Keep away the heating sources or
equipments.
Do not expose the unit to moisture.
Place the unit on a horizontal level. Keep the unit ventilated. Don't block the
heat hole. Overheat may cause malfunction.
Clean the cabinet with soft cloth Detergent or alcohol is forbidden.
This book is only a guide for user's operation not a criterion for configuration.
This apparatus shall not be exposed to dripping or splashing and that no
object filled with liquids, such as vases, shall be placed on the apparatus.
The lightning flash is intended to alert the user to the presence of dangerous
voltages within the product's enclosure, and touching the inner parts may result
in a risk of electric shockto persons.
The exclamation mark is intended to alert the user to the presence of important
operating instructions.
To reduce the risk of electric shock or fire, do not open the cover.
Refer servicing to qualified service personnel.
This mark indicates that this unit contains a class 1 laser product. The laser
beam may produce harmful radiation if it directly touches the human body.
Panel
Front panel
Back panel
Remote control
Remote control operation
MENU
1
20
2
21
3
22
23
4
24
5
25
6
26
7
27
8
28
9
10
11
29
12
13
30
14
31
15
32
16
33
17
34
18
19
Connection
Video system connection
Composite Video
Use the AV cable (yellow terminal) to
connect composite video output of this
unit to the TV/monitor video input.
Component Video
Use 3-core AV cable to connect the
component output terminals of this unit
to the corresponding TV/monitor input.
HDMI (Option)
Use a HDMI cable to connect the HDMI output to the TV/monitor HDMI input
terminal.
Note:
Which connection depends on the TV/monitor input terminal.
Do not use the all connections at one time, otherwise the picture will be
affecred.
Only the physical connection conforms to the video setting can produce the
normal picture (reference to the Video Setup in System Setup).
Connection
Audio connection system
Stereo Audio
Use a pair of AV cables (red for right/white for left)
to connect the stereo audio output of this unit to the
TV if you want to have sound from the TV.
Note:
The physical connection should match with audio output setup
of this unit. Please refer to Audio Setup in System Setup.
System Setup
Basic Operation
Press SETUP on the remote control unit to setup the initial setting.
select related[SETUP PAGE] with the directional buttons.
Menu Operations
You can setup the mode of audio and video output, initial setup, parental
control level, etc. You can also select the aspect ratio of the playback picture
to your TV screen.
Press SETUP to display the setup menu and the system will automatically
stop play.
System Setup
Press SETUP and select system setup page.
TV SYSTEM: Use up/down arrow buttons to make TV system selection.
There are four TV output systems to choose from: NTSC, PAL, PAL- M
and AUTO.
SCREEN SAVER: Use up/down arrow buttons to select the status of the
screen saver.
On: When enabled, if the unit has been idle(e.g.in stop/pause state are
waiting for user input for about 180 seconds), a screen saver will bounce
around the screen to protect screen.
Off: Setting without screen saver.
HD OUTPUT: Use up/down arrow buttons to set video resolution, there
are five resolution(720P, 10801,1080P).
VIDEO: There are five video output modes to choose from:
INTERLACE-YUV: Use Y Cb Cr terminals to output signals.
P-SCAN YPBPR: Use Y Cb Cr terminals to output signals and convert to
progressive output.
TV TYPE: Using left/right arrow button to select TV aspect ratio.
4:3/PS:
Pan & Scan video output for a normal TV set. The screen displays the wide
picture on the wide screen with a left and right portion automatically cut Off.
4:3/LB:
Letter Box video output for a normal TV set. The screen displays the wide
picture with bands displayed on the upper and lower portions of the Screen.
16:9:
Wide screen video output for a wide screen TV set.
PASSWORD
The initial setting of this item is under locked status. You can not set the rating
and also can not change password . Input initial password: 0000 and press
[ENTER] to confirm and then you can set rating and change password.
RATING
Playing some DVD discs can be limited depending on the age of the users.
The parental control function allows playback limitation level to be set by the
parent from level 1 to level 8. The level is from high to low. Level 1 is the lowest
level and level 8 is the highest lever. This function is only valid for some DVD
discs that have the limit level. And you should set the password first and make
sure the password lock is locked.
DEFAULT
Use the right arrow button to select [RESTORE] and press [ENTER] to return
all the settings of the system to the original settings.
POWER RESUME
Use up/down arrow buttons to set resume play.
Language Setup
OSD LANGUAGE: Use up/down arrow buttons to select desired OSD
language and press [ENTER] to confirm.
The unit includes OSD languages: ENGLISH.
AUDIO LANGUAGE: Use up/down arrow buttons to select desired AUDIO
language and press [ENTER] to confirm.
SUBTITLE LANGUAGE: Use up/down arrow buttons to select desired
SUBTITLE language and press [ENTER] to confirm.
MENU LANGUAGE: Use up/down arrow buttons to select desired MENU
language and press [ENTER] to confirm.
Audio Setup
AUDIO OUT: Use right arrow button to sdect the audio output way.
This is the way for you to select SPDIF/OFF, SPDIF/RAW, SPDIF/PCM.
KEY： Press ▲ ▼ to adjust the tone level.
Video Setup
BRIGHTNESS: Use ▲ ▼ to adjust the brightness of the video output.
CONTRAST: Use ▲ ▼ to adjust the contrast value of the video output.
HUE: Use ▲ ▼ to adjust the HUE value of the video output.
SATURATION : Use ▲ ▼ to adjust the saturation value of the video output.
SHARPNESS: Use ▲ ▼ to adjust the sharpness value of the video output.
Speaker Setup
DOWN MIX LT/RT : When you play a disc that has logic effect, you can
choose LT/RT output. The disc information will be decoded and show better
effect.
STEREO: When 2ch output is selected, normal stereo signals may be
played from the L & R output socket.
Digital Setup
OP MODE
LINE OUT: The input signals are linear compressed and the volume is lower.
You should rather choose LINE OUT setting at night.
RF REMOD: The volume is higher and adapt to daytime use.
DYNAMIC RANGE: When you choose LINE OUT mode, select
DYNAMIC RANGE to adjust the compression ratio and you can get different
effects. When you adjust to FULL, the compression ratio will be set to the
lowest level. When adjust is OFF, the compression ratio will be set to the
lowest level.
DUAL MONO: You can set the audio output mode for Lor R channel. There
are four modes: STEREO, MONO L, MONO R, and MIX MONO.
Play
Basic Operation
Press OPEN/CLOSE button, the disc into tray opens. Place the disc on the
tray with the title facing up. Press OPEN/CLOSE again to close the disc tray.
When playing, press STANDBY button, the machine will be power-off and
go to standby state. Press STANDBY again, the machine will be power-on
and start playing.
Warning : The power is not fully cut off at the standby state. If the machine
will not be used for a long time, turn off the power by pressing the 'Power'
button on the front panel.
When playing DVD. Press TITLE button to return to the title menu.
When playing DVD discs press MENU once to return to submenu.
Press MENU again to return to the main menu. When playing VCD discs
press MENU button to turn on PBC, the VCD is played by menu, press
MENU button again to turn off PBC, then VCD is played in sequence.
Can choose the following resolution levels from the HDMI output.
When playing DVD with more than one audio stream, press LANGUAGE
to select what you desired.
When playing VCD or CD discs, press L/R button to select the left, right
channels or stereo.
Inhaltsverzeichnis
Andere Electcom DVD-Player Handbücher
