ElectrIQ EiQ-32M4K144FS Bedienungsanleitung

USER MANUAL

32 INCH LED MONITOR

eiQ-32M4K144FS

Thank you for choosing electriQ

Please read the user manual before using this monitor and keep it safe for future reference

Visit www.electriQ.co.uk to view our entire range of Intelligent Electricals

CONTENTS

SAFETY

PARTS LIST

STAND ASSEMBLY

CONNECTIONS AVAILABLE

GETTING STARTED

MONITOR CONTROLS

INITIAL SET UP

SHORTCUT BUTTONS

MENU OPTIONS

INPUT SOURCE

PICTURE

COLOUR SETTINGS

ADVANCE SETTINGS

ULTRA HDR

AUDIO

QUICK LINK

OTHER

TECHNICAL SPECIFICATION

TROUBLESHOOTING

SUPPORT

SAFETY INFORMATION

•

Read these instructions - All the safety and operating instructions should be

read before this product is operated.

•

Keep these instructions - The safety and operating instructions should be

retained for future reference.

•

Heed all warnings - All warnings on the appliance and in the operating

instructions should be adhered to.

•

Follow all instructions - All operating and usage instructions should be followed.

•

Do not use this equipment near water, or in humid environments - The

appliance should not be used near water or moisture e.g. in a wet basement or

near a swimming pool.

•

Clean only with a dry cloth. Do not use solvents or petroleum-based fluids.

•

Do not block any ventilation openings.

•

Do not install near any heat sources such as radiators, stoves or other apparatus

(including amplifiers) that produce heat.

•

Do not tamper with the supplied plug. This plug is a BS1363 standard plug.

•

Protect the power cord from being walked on or trapped, particularly at the plug

and at the point where it exits from the appliance.

•

Only use attachments/accessories specified by the manufacturer.

•

Use only with a cart, stand, tripod, bracket or table specified by the

manufacturer or sold with the apparatus. When a cart or stand is used, use

caution when moving it to avoid any injuries or damage from it tipping over.

•

Unplug the apparatus during lightning storms or when unused for long periods

of time.

•

Refer all servicing to qualified personnel. Servicing is required when the

apparatus has been damaged in any way, such as if the power supply cord or

plug is damaged, liquid has been spilled or objects have fallen into the

apparatus or it has been exposed to rain or moisture, it does not operate

normally or has been dropped.

•

Please keep the unit in a well-ventilated environment.

•

The monitor should only be connected to a mains power supply as rated on the

back of the equipment.

•

To prevent overload, do not share the same power supply socket with too many

other electronic components.

•

Do not place any connecting wires where they may be stepped on or tripped

over.

•

Do not place heavy items on the cable as this may cause damage.

•

When removing from a socket hold by the plug and not the wires.

•

Disconnect the power immediately and seek professional help if the plug or

cable is damaged, liquid has spilt onto the unit, if accidentally exposed to water

or moisture, if anything accidentally penetrates the ventilation slots or if the

unit does not work normally.

•

Do not remove the safety covers. There are no user serviceable parts inside.

Trying to service the unit yourself is dangerous and may invalidate the product's

warranty. Only qualified personnel should service this apparatus.

•

Do not block ventilation slots on the back cover. The monitor can be placed in a

cabinet but ensure at least 5cm (2") clearance all around. Do not tap or shake

the screen, this may damage internal components.

•

Due to our continuous product development, the operation and or features of

the product received may vary slightly from the information provided within the

manual.

•

WARNING: To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture. The apparatus shall not be exposed to dripping or

splashing and objects filled with liquids, such as vases, shall not be placed on the

apparatus.

•

WARNING: The wall plug socket is used as a disconnection device and should

remain readily accessible.

•

Although every effort is made to maintain the accuracy of the manual, due to

continuous product development, some variation from the manual is possible.

•

The availability of features and settings may vary depending on the input source,

method of connection as well as the quality and specification of the cables used.

AT FULL VOLUME, PROLONGED LISTENING MAY DAMAGE THE

USER’S HEARING.

This warning sign is to

warn of dangerous

voltage inside the

product.

CAUTION: To reduce the risk of electric

shock, DO NOT remove the cover (or

back). No user serviceable parts inside.

Refer servicing to qualified service

personnel.

This warning sign is to alert

you of important

instructions accompanying

the product.

WHAT’S INCLUDED

USER MANUAL POWER SUPPLY POWER CABLE HDMI

NOTES:

⚫Due to the heavy weight and dimensions of the LCD screens and their fragile nature, we recommend

that they are unpacked and assembled by 2 people.

⚫electriQ and its distributors and dealers are not liable or responsible for damage or injury caused by

improper installation, improper use or failure to observe these safety instructions. In such cases any

guarantee will expire.

⚫The stand can be removed from the rear of the monitor by pressing the quick release button on the

rear of the monitor.

STAND ASSEMBLY

1. Open the package, take out the Styrofoam and place it flat on a table.

2. Remove the upper foam, remove the film bag from the monitor, and place the display on the lower

foam.

3. Take out stem and base, Lock them with 1 screws (KM4*12mm).

4. Insert the stem to the slot of back cover. Push the button on the stand board to remove.

5. Carefully hold the stand while lifting the monitor to an upright position (Note: During the process of

standing up the monitor, please do not pinch the screen directly with your hand to prevent the

screen from breaking)

CONNECTIONS AVAILABLE ON THE MONITOR

GETTING STARTED

MONITOR CONTROLS

Enter the Main OSD Menu and Select submenu

Go Up within the Main Menu or increase the value of the selected

item

Go Down within the Main Menu or decrease the value of the selected

item

Select signal source or Exit the menu

Turn the monitor On or Off

1. HDMI 2 (HDMI 2.1)

2. HDMI 1 (HDMI 2.1)

3. DP 2 (DP 1.4)

4. DP 1 (DP 1.4)

5. Audio Out

6. Power

INTIAL SETUP

Connect the monitor to a power outlet.

1. Press the power button on the monitor or to turn it on (The indicator will be blue).

2. Connect the relevant cable to the corresponding input on the monitor. The source will be

automatically detected.

3. To change between inputs, press the “Source” button to enter the source menu. Use the “ ” and

“ ”buttons to choose the input source between Auto Select,DP1,DP2 and HDMI1,HDMI2.

MENU OPTIONS

The menu for the monitor can be accessed by pressing the menu button on the control panel. This

menu is separated into the following sub menus: INPUT SOURCE, PICTURE, COLOUR SETTINGS,

ADVANCE SETTINGS, ULTRA HDR, AUDIO, QUICK LINK, OTHER, details of each menu can be

found in the following section. You can navigate through these menus by using the arrow buttons on

your monitor.

Input

DP1

DP2

HMDI1

HMDI2

OSD MENU

INPUT SOURCE

Signal

Switch the signal input or select the source between DP1, DP2,

HDMI1, HDMI2.

PICTURE

Brightness

Adjust the brightness of the display between 0 and 100.

Contrast

Adjust the contrast of the display between 0 and 100.

Sharpness

Adjust the sharpness value between 0-4.

Backlight

Adjust the backlight of the display between 0 and 100.

Inhaltsverzeichnis

Andere ElectrIQ Monitor Handbücher

ElectrIQ

ElectrIQ eiQ-49SUWD144FSH Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-27MF75I Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-27CVQHD165IFSGHLD Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-24FHD75IS-V2 Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-25FHD280TFSGH Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-49SUWD144FSHQ-V2 Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-43SUWD120FSHDR600 Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-34SUWD144FSHQ Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-274K144IFSGHUCA Bedienungsanleitung

ElectrIQ

ElectrIQ EIQ-244KMHDR Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-34SUWD144FSHQ-V3 Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-15FHDPM-V2 Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-35CMUWQ100GAFSH Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-274K144IFSGHUCA Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-49CV5UWD120FSHQA Bedienungsanleitung

ElectrIQ

ElectrIQ EIQ-284KMB Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-27MF75I-V2 Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-27MQ95FSHDRU Bedienungsanleitung

ElectrIQ

ElectrIQ EIQ-27MF144FSHDR Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-25FHD165TFSGH Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-32MCV4KAFSHDR Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-24FHD75IS Bedienungsanleitung

ElectrIQ

ElectrIQ 24FHD75IS Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-15FHDPM Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

ElectrIQ eiQ-32M4K144FS Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken