ElectrIQ EiQ-49CV5UWD120FSHQA-V3 Bedienungsanleitung

USER MANUAL

49” LED CURVED MONITOR

eiQ-49CV5UWD120FSHQA-V3

Thank you for choosing electriQ.

Please read the user manual before using this monitor and keep it safe for future

reference.

Visit our page www.electriQ.co.uk to view our entire range of Intelligent Electricals.

3
CONTENTS 
 
SAFETY INFORMATION................................................................................ 4 
WARNINGS............................................................................................... 5 
PREPARING THE MONITOR FOR USE ....................................................... 6 
ATTACHING THE STAND......................................................................... 7 
WALL MOUNTING..................................................................................... 8 
GETTING STARTED...................................................................................... 9 
CONNECTIONS AVAILABLE ON THE MONITOR................................... 9 
MONITOR CONTROLS............................................................................. 9 
INITIAL SETUP........................................................................................ 10 
NAVIGATING THE OSD............................................................................... 10 
GAME SETTINGS ................................................................................... 11 
PICTURE SETTINGS.............................................................................. 12 
COLOUR SETTINGS............................................................................... 13 
PIP (Picture in Picture) / PBP (Picture by Picture) .................................. 14 
OSD SETTINGS...................................................................................... 15 
OTHER SETTINGS ................................................................................. 16 
SPECIFICATION .......................................................................................... 17 
TROUBLESHOOTING.................................................................................. 18 
PRODUCT DISPOSAL ................................................................................. 19 
electriQ UK SUPPORT ................................................................................. 19 
 
 

SAFETY INFORMATION

⚫Read these instructions –All the safety and operating instructions should

be read before this product is installed or operated.

⚫Keep these instructions –The safety and operating instructions should

be retained for future reference.

⚫Heed all warnings –All warnings on the appliance and in the operating

instructions should be adhered to.

⚫Follow all instructions –All operating and usage instructions should be

followed.

⚫Do not use this equipment near water –The appliance should not be

used near water or moisture e.g. in a wet basement or near a swimming

pool.

⚫This monitor is designed for indoor use only.

⚫Clean only with a dry cloth. Do not use solvents or petroleum-based fluids.

⚫Do not block any ventilation openings.

⚫Do not install near any heat sources such as radiators, stoves or other

apparatus (including amplifiers) that produce heat.

⚫Do not tamper with the supplied plug. This plug is a BS1363 standard plug.

⚫Protect the power cord from being walked on or pinched, particularly at the

plug and at the point where it exits from the appliance.

⚫Only use attachments/accessories specified by the manufacturer.

⚫Unplug the apparatus during lightning storms or when unused for long

periods of time.

⚫Refer all servicing to qualified personnel. Servicing is required when the

apparatus has been damaged in any way, such as:

•The power supply cord or plug has been damaged.

•Liquid has been spilled or the monitor has been exposed to rain or

moisture.

•Objects have fallen into the apparatus.

•It does not operate normally or has been dropped.

⚫Please keep the unit in a well-ventilated environment.

⚫The monitor should only be connected to a mains power supply with AC

100-240V~ 50/60Hz.

⚫To prevent overload, do not share the same power supply socket with too

many other electronic components.

⚫Do not place any connecting wires where they may be stepped on or

tripped over.

⚫Do not place heavy items on the cable as this may cause damage.

⚫When removing from a socket grip the plug, not the cable.

⚫Disconnect the plug immediately and seek professional help if the plug or

cable is damaged, liquid has spilt onto the monitor, if accidentally exposed

to water or moisture, if anything accidentally penetrates the ventilation slots

or if the set does not work normally.

⚫Do not remove the safety covers. There are no user serviceable parts

inside.

⚫Do not block ventilation slots on the back cover. The monitor can be placed

in a cabinet but ensure the guidance on clearances (see next page) are

followed.

⚫Do not tap or shake the screen, this may damage internal components.

⚫Diagrams within the manual are for illustrative purposes only, and as such

there may be differences to the actual product received.

⚫This is a CLASS I product and as such requires an earth connection.

WARNINGS

Never place a monitor in an unstable location. A monitor may fall, causing

serious personal injury or death. Many injuries, particularly to children, can

be avoided by taking simple precautions such as:

⚫Use cabinets or stands recommended by the manufacturer of the

monitor.

⚫Only use furniture that can safely support the monitor.

⚫Ensure the monitor is not overhanging the edge of the supporting

furniture.

⚫Do not place the monitor on tall furniture (for example, cupboards or

bookcases) without anchoring both the furniture and the monitor to a

suitable support.

⚫Do not place the monitor on cloth or other materials that may be located

between the monitor and the supporting furniture.

⚫Educate children about the dangers of climbing on furniture to reach the

monitor or its controls.

If your existing monitor is being retained and relocated, the same

considerations as above should be applied.

AT FULL VOLUME, PROLONGED LISTENING MAY DAMAGE THE

USER’S HEARING.

This warning sign is to

warn of dangerous

voltage inside the

product.

CAUTION: To reduce the risk of

electric shock, DO NOT remove the

cover (or back). No user serviceable

parts inside. Refer servicing to

qualified service personnel.

This warning sign is to alert

you of important instructions

accompanying the product.

WHAT IS SUPPLIED

Monitor Power Cable DP Cable Bolts

User Manual Stand Remote Control Extension Bolts

(For Wall Mounting)

PREPARING THE MONITOR FOR USE

Place the monitor on a firm and flat

surface, leaving a space of at least

10cm around the unit and 30cm from

the top of the unit to the ceiling or

cabinet. Ensure the monitor is

positioned close to the wall to avoid it

falling when pushed.

When twisting the monitor, do

not hold by the top, you should

twist from the base.

When lifting the monitor, do not

use one hand to handle it, you

should lift the monitor using two

hands, ensuring pressure is not

put on the screen itself.

10cm

30cm

10cm

ATTACHING THE STAND

⚫Due to the heavy weight and dimensions of the screens and their fragile nature, we recommend

that they are unpacked and assembled by 2 people.

⚫electriQ and its distributors and dealers are not liable or responsible for damage or injury

caused by improper installation, improper use or failure to observe these safety instructions. In

such cases any guarantee will be void.

⚫Keep the foam underneath the monitor before attaching the stand.

⚫To avoid damage, do not touch the screen when moving the monitor.

1. Open the packaging, take out the monitor with foam still attached and gently place it on a

desk or table.

2. Take out the two main parts of the stand. Then use a screwdriver (not included) and bolts to

fasten the base to the stem.

3. Align the stand stem bracket with the opening on the back of the monitor and carefully insert

the top of the bracket into the monitor, before pressing the base of the bracket into position,

which should securely click into place.

HOW TO REMOVE THE STAND

Before removing the stand, remove the port cover from the rear of monitor. Ensure that the monitor

is laid with the screen facing downwards, while suitably supported (Ideally in the original

polystyrene) Press the switch down to release the monitor from the bracket.

WALL MOUNTING

•The monitor is provided with mounting holes for

a VESA approved wall mounting bracket (not

supplied).

•The VESA mounting pattern is: 75x75mm and

the size of the screws is 4 x M6 x 10 (not

supplied)

•Do not use screws longer than specified or

damage will occur to the internal components.

NOTE: As the monitor is considered heavy, please consult with a professional wall mount installer to

perform the installation. 1. Open the package, take out the product with the foam still

attached, and gently place it on a desk or table. Remove

the accessories and the foam covering the rear of the

monitor. If the monitor was already attached to the stand,

remove the stand.

2. Remove the original

bolts x 4 from the

opening in the back

of the monitor.

Follow the directions

received with your

mount, stand, or

accessory and install

the monitor on the wall or fixture as desired. Remember to use the included bolts when

attaching anything to the back of the monitor. Do not discard the original bolts as these may

be needed for future use.

NOTES:

⚫Do not pinch the screen directly with your hand when hanging the product to prevent the

screen from breaking.

⚫Due to the heavy weight and dimensions of LCD screens and their fragile nature, we

recommend that they are unpacked and assembled by 2 people and professional installers are

used to wall mount them (wall mounting is optional).

⚫If you do not understand the instructions, or are unsure how to install this product, please

contact a professional for assembly advice and assistance.

⚫Careful consideration should be made regarding the location the monitor is to be wall mounted

as some walls are not suitable for installation. If the monitor is to be mounted on drywall, the

mount must be anchored into a wooden stud, concrete block or brick behind the drywall.

Installing on drywall alone may not support the weight of the display.

⚫When drilling holes, it is particularly important to take care of electrical cables, water or gas

pipes in the wall. Please follow the instructions provided by the wall bracket manufacturer and

ensure that all fixing bolts supplied are used.

⚫electriQ and its distributors and dealers are not liable or responsible for damage or injury

caused by improper installation, improper use or failure to observe these safety instructions. In

such cases any guarantee will expire.

GETTING STARTED

CONNECTIONS AVAILABLE ON THE MONITOR

Audio Output: Insert an Audio cable into the monitor to output sound to a

device, such as headphones or speakers.

DP (Display Port) 1.4 (x2): Insert one end of the DP cable into the

computer’s DP output and connect the other end to the monitor’s DP port.

HDMI Port 2.1 (x2): Insert one end of the HDMI cable into a suitable

HDMI output and connect the other end to the monitor’s HDMI port.

Power Connector: Insert the power cable

MONITOR CONTROLS

WHILE OSD (ON SCREEN

DISPLAY) IS NOT DISPLAYED

WHILE OSD (ON SCREEN

DISPLAY) IS DISPLAYED

Press to display the OSD.

Enter the sub-menus within the

OSD or confirm the selected

function.

▼

HOTKEY 1 –See OSD Settings for

setting its function

Go down within the OSD or

decrease the value of a selected

setting.

▲

HOTKEY 2 –See OSD Settings for

setting its function

Go up within the OSD or

increase the value of a selected

setting.

HOTKEY 3 –See OSD Settings for

setting its function

Press to exit the OSD.

Press to turn the monitor On or Off.

INITIAL SETUP

1. Attach the stand or wall mount the product following the guidance on the

previous pages.

2. Connect the source device (such as PC) using the correct cable.

3. Connect the power cable to the monitor and plug into a suitable socket.

4. Press the POWER button on the monitor or to turn it on.

NAVIGATING THE OSD

(ON SCREEN DISPLAY)

The menu for the monitor can be accessed by pressing the menu button on

the control panel. This menu is separated into the following sub menus:

Game Settings, Picture Settings, Colour Settings. PIP/PBP, OSD Settings

and Other Settings. Details of each menu can be found in the following

sections.

The OSD can be navigated using the buttons on the base of the monitor

(See monitor controls on the previous page), or by using the supplied

remote control.

The options available within the on screen display will change depending on

the method of connection, and the options chosen within related settings on

the OSD.

Inhaltsverzeichnis

Andere ElectrIQ Monitor Handbücher

ElectrIQ

ElectrIQ EIQ-244KMHDR Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-30CVWF200VAFSGH Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-27MF75I Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-34SUWD144FSHQ Bedienungsanleitung

ElectrIQ

ElectrIQ EIQ-284KMB Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-27MF144FSHDRB Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-274K144IFSGHUCA Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-49CV5UWD120FSHQA Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-15FHDPM-V2 Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-34SUWD144FSHQ-V3 Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-49SUWD144FSHQ-V2 Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-24FHD75IS-V2 Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-DUAL15FHDPM Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-32CVQ165VAFSGH Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-35CMUWQ100GAFSH Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-25FHD280TFSGH Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-274K144IFSGHUCA Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-43SUWD120FSHDR600 Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-32Q75HDR Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-43CVSUWD120FSH Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-284K144FSGH Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-25FHDO165FSGUC Bedienungsanleitung

ElectrIQ

ElectrIQ eiQ-25FHD165TFSGH Bedienungsanleitung

ElectrIQ

ElectrIQ 24FHD75IS Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

ElectrIQ eiQ-49CV5UWD120FSHQA-V3 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken