Electro-Harmonix BASS CLONE Bedienungsanleitung

BASS CLONE

Bass Chorus

Congratulations on your purchase of the Electro-Harmonix Bass Clone. The

Bass Clone is a compact chorus pedal with variable parameters for a range of

subtle to extreme modulation effects. Use these variable parameters to dial

in the perfect chorus sound. You can add subtle, shimmering modulation to

the higher end of your bass, or create a more extreme, vibrato-sounding

effect.

The core circuit in the Bass Clone is nearly identical to the legendary Electro-

Harmonix Small Clone, but with added features tailored to the needs of

bassists. These features include a greater range of modulation depth, added

bass and treble EQ controls to shape your tone, and a crossover switch to

decrease the amount of low frequency modulation. The Bass Clone takes a

pedal that was already a favorite of bassists and makes it the perfect

compact bass chorus pedal.

- USING THE BASS CLONE -

Use the footswitch to turn on the effect. The red status LED lights to indicate

that the effect is engaged. The sound you hear is a combination of dry and

modulated signal.

Adjust DEPTH to set the modulation amount and turn RATE to set the

modulation speed. Flip the X-OVER switch up to cut low end from the

modulated half of the signal; the effect will be more subtle on lower notes.

Engaging X-OVER helps you retain essential clarity and punch in your low

end while maintaining shimmering modulation in your high end. BASS and

TREBLE allow you to further shape the chorus tone by boosting/cutting low

end and high end respectively.

WARNING: Your Bass Clone can be used with an Electro-Harmonix 9.6DC-

200BI power supply (same as used by Boss®& Ibanez®: 9.6 Volts DC

200mA). The Bass Clone draws 15mA at 9VDC with a center negative plug.

Using the wrong adapter or a plug with the wrong polarity may damage your

Bass Clone and void the warranty.

- CONTROLS, I/O JACKS, POWER -

Footswitch & Status LED –The red LED illuminates when the effect is

engaged. The status LED glows brightly to signal that all operational voltages

are satisfactory. The LED will not light if the Bass Clone is bypassed. Press

the footswitch to toggle between effect on and true bypass mode.

DEPTH Knob –Controls the amount of modulation.

RATE Knob –Controls the speed of modulation.

BASS Knob –Boosts or cuts low end from the

dry

half of the effect signal.

No boosting or cutting at 12 O’clock.

TREBLE Knob –Boosts or cuts high end from the

mixed

effect signal. No

boosting or cutting at 12 O’clock.

X-OVER –Cuts low end from modulated half of the signal when switch is

facing up.

INPUT Jack –Plug your instrument or the output of another effects pedal

into this ¼” jack. The input impedance is 2.2M.The battery is drained

when a cable is plugged into this jack, regardless of bypass state.

AMP Jack –The AMP jack outputs the Bass Clone’s audio signal. The

output impedance is 1K.

9V Power Jack –The Bass Clone accepts 9V Batteries, and can also be

powered from an Electro-Harmonix 9.6DC-200 power supply. Plug the output

of the AC adapter into the 9V power jack located at the top of the Bass

Clone. The Bass Clone draws 15mA at 9VDC with a center negative plug.

The Bass Clone accepts Boss®and Ibanez®style AC Adapters capable of

delivering at least 50 mA.

- CHANGING THE BATTERY -

To change your 9V battery, remove the four screws on the bottom of the

Bass Clone. Take off the bottom plate and change the battery. Do not touch

the circuit board while the bottom plate is off or you risk damaging a

component.

- WARRANTY INFORMATION -

Please register online at http://www.ehx.com/product-registration or

complete and return the enclosed warranty card within 10 days of purchase.

Electro-Harmonix will repair or replace, at its discretion, a product that fails

to operate due to defects in materials or workmanship for a period of one

year from date of purchase. This applies only to original purchasers who

have bought their product from an authorized Electro-Harmonix retailer.

Repaired or replaced units will then be warranted for the unexpired portion

of the original warranty term.

If you should need to return your unit for service within the warranty period,

please contact the appropriate office listed below. Customers outside the

regions listed below, please contact EHX Customer Service for information on

warranty repairs at [email protected] or +1-718-937-8300. USA and Canadian

customers: please obtain a Return Authorization Number (RA#) from

EHX Customer Service before returning your product. Include  with your

returned unit  a written description of the problem as well as your name,

address, telephone number, e-mail address, RA# and a copy of your receipt

clearly showing the purchase date.

United States & Canada Europe

EHX CUSTOMER SERVICE JOHN WILLIAMS

ELECTRO-HARMONIX ELECTRO-HARMONIX UK

c/o NEW SENSOR CORP. 13 CWMDONKIN TERRACE

55-01 2ND STREET SWANSEA SA2 0RQ

LONG ISLAND CITY, NY 11101 UNITED KINGDOM

Tel: 718-937-8300 Tel: +44 179 247 3258

Email: [email protected] Email: electroharmonixuk@virginmedia.com

To hear demos on all EHX pedals visit us on the web at www.ehx.com

Email us at info@ehx.com

- FCC COMPLIANCE -

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation. If the device is

not installed and used in accordance with the instructions, it may cause

harmful interference to radio communications and void the user's authority

to guarantee the equipment.

Note:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

Modifications not expressly approved by the manufacturer could void the

user's authority to operate the equipment under FCC rules.

Andere Electro-Harmonix Musikpedal Handbücher

Electro-Harmonix

Electro-Harmonix XO WHITE FINGER Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix PICO POG Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix FLATIRON FUZZ Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix STEREO POLYCHORUS XO Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix Intelligent Harmony Machine Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix Slap-Back Echo Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix TURNIP GREENS Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix nano POCKET METAL MUFF Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix Riddle: Q-Balls Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix NANO BASS BIG MUFF PI Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix EHX B9 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix nano SOUL PREACHER Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix nano MUFF OVERDRIVE Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix Super Pulsar Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix Tube Zipper Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix SPRUCE GOOSE OVERDRIVE Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix DOCTOR Q Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix Pitch Fork+ Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix Q-Tron Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix XO The Worm Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix Wailer Wah Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix Pitch Fork Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix 720 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix CRASH PAD Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken

Behringer

Behringer ULTRA WAH UW300 Bedienungsanleitung

Whirlwind

Whirlwind oc-bass Bedienungsanleitung

Strymon

Strymon Lex-rotary Bedienungsanleitung

Behringer

Behringer PB600 Bedienungsanleitung

Lexicon

Lexicon MX200 Bedienungsanleitung

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Bedienungsanleitung

Matthews Effects

Matthews Effects Whaler V2 Bedienungsanleitung

Grid 1

Grid 1 Pedal Jeanie Bedienungsanleitung

Amptweaker

Amptweaker tightboost Bedienungsanleitung

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung

Dimavery

Dimavery EPVP-50 Bedienungsanleitung

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Bedienungsanleitung

Pro-MIDI

Pro-MIDI G25 Bedienungsanleitung

DW 7000 Bedienungsanleitung

FAMC

FAMC Liquid-Foot Jr. Series Bedienungsanleitung

Dimavery

Dimavery EPOD-50 Overdrive Bedienungsanleitung

TREX

TREX ToneBug Totenschläger Bedienungsanleitung

BBE

BBE ORANGE SQUASH Bedienungsanleitung