Electro-Voice EVOLVE 50 Bedienungsanleitung

EVOLVE 50 Portable Column System

en | Installation manual

Table of contents

1Safety 4

1.1 Important safety instructions 4

1.2 FCC information 5

1.3 Precautions 7

1.4 Notices 7

2Short information 8

2.1 Shipping contents 8

3Description 9

3.1 System features 9

3.2 Quick setup 10

4Installation 11

5Amplifier DSP 12

5.1 Amplifier DSP controls 12

5.2 System status 13

5.3 DSP control menu 14

6Pairing the QuickSmart Mobile application 20

7Recommended configurations 21

7.1 Stereo pair of EVOLVE 50 systems 21

7.2 Solo musician performance 22

8Troubleshooting 23

9Technical data 25

9.1 Dimensions 26

9.2 Frequency response 26

en 3

Electro-Voice Installation manual 2017.07 | 02 | F.01U.341.640

Safety

Important safety instructions

WARNING: TO REDUCE THE RISK OF

FIRE OR ELECTRIC SHOCK, DO NOT

OVEREXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE

AVIS: RISQUE DE CHOC ELECTRIQUE,

NE PAS OUVRIR.

WARNING: THE MAINS PLUG OR AC

INLET IS USED AS A DISCONNECT

DEVICE. THE DISCONNECT DEVICE

SHALL REMAIN READILY OPERABLE.

WARNING: CONNECT ONLY TO MAINS

SOCKET WITH PROTECTIVE EARTHING

CONNECTION.

WARNING: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK) AS THERE ARE NO

USER-SERVICABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle is

intended to alert the user to the

presence of uninsulated “dangerous

voltage” within the product’s enclosure

that may be sufficient magnitude to

constitute a risk of electric shock to

persons.

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the literature

accompanying the appliance.

The asterisk within an equilateral

triangle is intended to inform the user to

necessary installation or removal

instructions regarding equipment or

hardware use relating to the system.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and

a third grounding prong. The wide blade or the third prong is provided for your safety. If

the provided plug does not fit into your outlet, consult an electrician for replacement of

the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or

with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug the apparatus during lightning storms or when unused for long periods of time.

1.1

EVOLVE 50 Portable Column System

2017.07 | 02 | F.01U.341.640 Installation manual Electro-Voice

14. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been dropped.

15. No naked flame sources, such as lighted candles, should be placed on the apparatus.

16. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or

moisture. The apparatus should not be exposed to dripping or splashing. Objects filled

with liquids, such as vases should not be placed on apparatus.

17. Do not block any ventilation openings. Install in accordance with the manufacturer's

instructions.

18. Minimum 60 cm (2 ft) distances around the apparatus for sufficient ventilation.

19. The ventilation should not be impeded by covering the ventilation openings with items,

such as newspapers, table-cloths, curtains, etc.

20. To completely disconnect AC power from this apparatus, the power supply cord must be

unplugged.

Warning!

This product is not designed to be suspended. Do NOT use handles or any other method to

suspend the loudspeaker. Handles on Electro-Voice loudspeakers are intended to only be

used for temporary transport by people.

Items, such as fiber rope, wire rope, cables, or other types of materials cannot be used to

suspend loudspeaker from the handles.

Caution!

Do not attempt to move this loudspeaker system when it is fully assembled.

You may damage the system or cause personal injury.

FCC information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

1.2

en 5

Electro-Voice Installation manual 2017.07 | 02 | F.01U.341.640

Notice!

This product has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This product generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this product does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.

The device contains a BT module CYBLE-022001-00 which has been granted by FCC and IC,

the FCC ID:WAP2001 and IC:7922A-2001. And module is assembled on the PRE PCB

Please take attention that changes or modification not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

This equipment should be installed and operated with a minimum distance 20cm between the

radiator and your body

This device complies with Industry Canada license-exempt RSS standard(s). Operation is

subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils

radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna

of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To

reduce potential radio interference to other users, the antenna type and its gain should be so

chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that

necessary for successful communication.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut

fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour

l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage

radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain

de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité

nécessaire à l'établissement d'une communication satisfaisante.

EVOLVE 50 Portable Column System

2017.07 | 02 | F.01U.341.640 Installation manual Electro-Voice

Precautions

If an Electro-Voice loudspeaker is used outdoors on a sunny day, place the

loudspeaker in a shaded or covered area. The loudspeaker amplifiers have

protection circuits that temporarily shut the loudspeaker off when extremely

high temperatures are reached. This can happen on hot days when the

loudspeaker is in direct sunlight.

Do not use Electro-Voice loudspeakers in an environment where temperatures

are below 0°C (32°F) or exceed +35°C (95°F).

Never expose an Electro-Voice loudspeaker to rain, water, or high moisture.

Electro-Voice loudspeakers are easily capable of generating sound pressure

levels sufficient to cause permanent hearing damage to anyone within normal

coverage distance. Caution should be taken to avoid prolonged exposure to

sound pressure levels exceeding 90 dB.

Notices

Old electrical and electronic appliances

Electrical or electronic devices that are no longer serviceable must be collected separately and

sent for environmentally compatible recycling (in accordance with the European Waste

Electrical and Electronic Equipment Directive).

To dispose of old electrical or electronic devices, you should use the return and collection

systems put in place in the country concerned.

any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior

written permission of the publisher. For information on getting permission for reprints and

excerpts, contact Electro-Voice.

The content and illustrations are subject to change without prior notice.

Notice!

Bluetooth® is available in select countries.

Contact your nearest Electro-Voice dealer or Electro-Voice distributor for more information.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.

and any use of such marks by Bosch Security Systems, Inc. is under license. Other trademarks

and trade names are those of their respective owners.

1.3

1.4

en 7

Electro-Voice Installation manual 2017.07 | 02 | F.01U.341.640

Short information

The following table lists products in a family, with CTN (Commercial Type Number) and

identifying product name DESCRIPTION.

CTN Description

EVOLVE50-TB Column speaker array, pole, black

EVOLVE50-SB-US Column speaker sub US, black

EVOLVE50-SB-EU Column speaker sub EU, black

EVOLVE50-SB-AP Column speaker sub AP, black

EVOLVE50-SB-GL Column speaker sub, black, global, no BT

Shipping contents

Quantity Component

1 Subwoofer

1 Power cord

1 EVOLVE 50 installation manual

1 Warranty card

1 Safety manual

Table 2.1: Subwoofer box

Quantity Component

1 Column array

1 Sub pole

1 Carry bag

Table 2.2: Column array box

2.1

EVOLVE 50 Portable Column System

2017.07 | 02 | F.01U.341.640 Installation manual Electro-Voice

Description

Thank you for choosing an Electro-Voice portable column system. Please take time to consult

the manual to understand all the features built into your EV system and fully utilize its

performance capabilities.

The EVOLVE 50 portable column system is a new entry and form factor in the Electro-Voice

portable sound portfolio. Designed to deliver an uncompromising combination of low-profile

aesthetics and superior audio performance, the EVOLVE 50 sets a new standard for portable

columnar systems.

EVOLVE 50 is designed to quickly and easily be transported and assembled. The three handle

design on the subwoofer and convenient included carry case for the sub pole and column

array provide minimal resistance to getting excellent, professional sound anywhere you need

it. Installation is made easier via the symmetrical aluminum subwoofer pole with an integrated

wire assembly. The connection is secured by the magnetic assisted latching system, which

magnetically locks the sub pole in place.

The full-range column array and its eight 3.5-inch neodymium drivers are directed using

custom-designed waveguides for consistent 120° coverage. The ported subwoofer enclosure

houses a 12-inch woofer that is supported by 18 mm wood for enhanced stiffness and

acoustical performance. The Class-D amplifier provides up to 1000 watts of output power: 500

watts to the subwoofer and 500 watts to the column array. The input panel features EV's

industry-leading QuickSmartDSP interface—allowing intuitive navigation of system parameters

via an LCD with single-knob control—as well as multiple options for signal routing and inputs.

The new Electro-Voice QuickSmart Mobile application utilizes Bluetooth® Low Energy (BTLE)

technology for the wireless configuration, control, and monitoring of up to six EVOLVE 50

systems simultaneously. High-resolution Bluetooth® audio streaming adds convenience for

wireless music playback in breakout rooms, intermission, and musical accompaniment.

Bluetooth® is available in select countries.

Electro-Voice quality and testing procedures far exceed the industry norm to yield efficient

and effective electro-acoustic performance; this creates components that deliver an accurate,

linear response at the system’s highest output levels. When applied to EVOLVE 50, this

engineering philosophy results in a system that brings a new sonic benchmark to the column

speaker segment, all packaged in a sleek and portable enclosure that blends into the

background in any application from a lounge to a wedding reception.

System features

▪EV QuickSmart Mobile application: quickly and wirelessly configure, control, and monitor

up to six EVOLVE 50 systems simultaneously, and receive immediate notification during

critical performance conditions. Bluetooth® connectivity is available in select countries.

▪High-quality Bluetooth® audio streaming for background music or musical

accompaniment. Bluetooth® connectivity is available in select countries.

▪Ultra-wide 120° horizontal coverage via custom-designed waveguides and array-formed

40° asymmetrical vertical coverage means all acoustical energy is directed towards both

sitting and standing audiences.

3.1

en 9

Electro-Voice Installation manual 2017.07 | 02 | F.01U.341.640

▪QuickSmartDSP provides best-in-class processing via EV's signature single-knob user

interface with LCD. Easy setup via four presets (Music, Live, Speech, Club), three-band

EQ (low, mid, high), five user-programmable presets (Store and Recall settings), output

delay, phantom power, visual monitoring of limiter status, input level control and meters,

and master volume control to optimize gain structure.

▪Ideal for portable applications. Light weight and intuitive assembly via the magnet

assisted sub pole make a quality performance easier than ever.

Quick setup

Subwoofer

To set up a subwoofer, do the following:

Step Illustration

1. Connect the AC power cord from a

grounded line receptacle to the MAINS IN.

FUS E T5AL/25 0V

REPLACE AS MARKED

OPE RATING V OLTAGE / TEGAN GAN:

100-240V AC / 50-60 Hz

MAINS IN

2. Connect the XLR or TRS cables from an

audio source to INPUT 1 or INPUT 2 or

connect the RCA cable or 3.5 mm mini jack

from an audio source to INPUT 3.

3. Adjust the input gain to (infinity).

4. Switch POWER to ON.

POWER

ON OF F

5. From the DSP home screen, increase the

input gain to the desired sound output.

6. Adjust the MASTER VOL knob to the

desired volume.

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

LG NB4532B Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AR-DM61-BT Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung