Electro-Voice ZxA5-90 Bedienungsanleitung

ZxA5 Series

Owner’s Manual

ZxA5-60

ZxA5-90

tant Sa

Instructions

The lightning flash with arrowhead symbol, within an equilateral triangle i

intended to alert the user to the presence of uninsulated “dangerou

voltage” within the product’s enclosure that may be of sufficien

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateraltriangleis intended to alert

the user to the presence of important operating and maintenance

(

servicin

instructions in the literature accom

the a

liance.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean onl

with a dr

cloth.

The asterisk within an equilateral triangle is intended to inform the user t

necessary installation or removal instructions regarding equipment o

hardware use relatin

to the s

stem.

7. Do not block any ventilation openings. Ins

all in accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from

the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped

14. To completely disconnect AC power from this apparatus, the power supply cord must be unplugged.

15. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on this

apparatus.

16. TheAC plug of the power supply cord shall remain readily operable.

Caution: Do not exceed the marked rating of the AC Output.

Example: If each additional unit is rated 3A,a maximum of 3 units can be connected for a total of 9A.

Management of WEEE (waste electrical and electronic equipment) (applicable in Member States of the European Union and other

European countries with individual national policies on the management of WEEE) The symbol on the product or on its packaging

indicates that this product may not be treated as regular household waste, but has to be disposed through returning it at a Telex

dealer.

Important Service Instructions

UTION:These servicing instructions are

or use by qualified personnel onl

oreducetherisko

electric shock, do not

perform any servicing other than that contained in the Operating Instructions unless you are qualified to do so. Refer all

servicing to qualified service personnel.

1. Security regulations as stated in the EN 60065 (VDE 0860 / IEC 65) and the CSAE65 - 94 have to be obeyed when servicing the appliance.

2. Use of a AC separator transformer is mandatory during maintenance while the appliance is opened, needs to be operated and is

connected to the AC.

3. Switch off the power before retrofitting any extensions, changing theAC voltage or the output voltage.

4. The minimum distance between parts carryingAC voltage and any accessible metal piece (metal enclosure), respectively between

the AC poles has to be 3 mm and needs to be minded at all times.

The minimum distance between parts carryingAC voltage and any switches or breakers that are not connected to theAC (secondary

parts) has to be 6 mm and needs to be minded at all times.

5. Replacing special components that are marked in the circuit diagram using the security symbol (Note) is only permissible when using original

parts.

6. Altering the circuitry without prior consent or advice is not legitimate.

7.Any work security regulations that are applicable at the location where the appliance is being serviced have to be strictly obeyed. This applies

also to any regulations about the work place itself.

8.All instructions concerning the handling of MOS - circuits have to be observed.

Note: SAFET

COMPONENT

(

HAS T

REPLACED WIT

ORIGINAL P

T ON

)

1ELECTRO-VOICE

ZxA5 Owne

’

s Manual

abl

Contents

tant Safet

Instructions ....................................................................................................... 1

ZxA5 Series Owne

’s Manual....................................................................................................... 2

Safet

First ................................................................................................................................... 3

Descri

tion ................................................................................................................................... 4

stem Features - ZxA5............................................................................................................... 4

stem Covera

e - ZxA5 ............................................................................................................. 4

stem Setu

- ZxA5 ................................................................................................................... 5

ZxA5 Am

lifie

.............................................................................................................................. 5

Sus

endin

ZxA5 S

eake

stems............................................................................................ 7

ZxA5 Sta

e Monito

Positions .................................................................................................... 13

ecifications ............................................................................................................................. 14

Dimensions ................................................................................................................................ 15

Bloc

Dia

ram............................................................................................................................15

Fre

uenc

Res

onse, Beamwidth, and Directivit

..................................................................... 16

ZxA5 Ri

Accessor

Reference Table ................................................................................. 17

Paintin

ZxA5 S

eaker S

stems............................................................................................... 18

ZxA5 Series Owne

’s Manual

Than

ou fo

choosin

the Electro-Voice®ZxA5 series louds

eake

stem. This s

stem is the

culmination of EV’s 75

ears of ex

erience in transduce

desi

n. Please take time to consult this

manual so that

ou can understand all the features built into

EV s

stem and full

utilize all its

erformance ca

abilities.

ELECTRO-VOICE

ZxA5 Owne

’

s Manual

Safet

First

When setting up, installing and using the Electro-Voice®ZxA5 speaker system, there are a

number of precautions that you should follow:

·When Electro-Voice®ZxA5 speakers are used for portable applications in which they will be

positioned directly on the floor, make sure that the floor or stage is solid and secure.

·Electro-Voice®ZxA5 speakers include 1-3/8 inch stand mounts to allow mounting on tripod

stands.

Make sure to:

·Check the specifications of the speaker stand to be certain it is capable of supporting the weight

of the speaker.

·Check that the speaker stand is placed on a flat, stable surface and be sure to fully extend the

legs of the stand. Do not try to make the stand “taller” and compromise its structural integrity.

·Route cables and position the stand so that performers, production crew and audience members

will not trip over the stand or cables and pull the speaker system over. Secure cables with wire

ties or tape whenever possible.

·Do not attempt to suspend more than one speaker on a stand designed for a single speaker

·Unless you are confident that you can safely handle lifting the weight of the speaker onto the

stand, ask another person to help you place it.

·If you intend to hang or fly the ZxA5 system, only do so safely with the correct hardware and

accessories.

WARNING:

Suspending any object is potentially dangerous and should only be

attempted by individuals who have a thorough knowledge of the techniques and

regulations of rigging objects overhead. Electro-Voice

strongly recommends that ZxA5

speakers be suspended taking into account all current national, federal, state and local

regulations. It is the responsibility of the installer to ensure that ZxA5 speakers are safely

installed in accordance with all such regulations. If ZxA5 speakers are suspended,

Electro-Voice

strongly recommends that the system be inspected at least once a year.

If any sign of weakness or damage is detected, remedial action should be taken

immediately.

There are data sheets for each EV Suspension and Array Kit that should

also be consulted prior to suspending speakers.

·Electro-Voice®does not recommend use of ZxA5 speakers outdoors without

protection from rain or in high moisture environments.

·Electro-Voice®ZxA5 loudspeakers are easily capable of generating sound pressure

levels sufficient to cause permanent hearing damage to anyone within normal

coverage distance. Caution should be taken to avoid prolonged exposure to sound

pressure levels exceeding 90 dB.

3ELECTRO-VOICE

ZxA5 Owne

’

s Manual

This is a Class A product. In a domestic environment this product my cause radio interferences in which case

the user may be required to take adequate measures.

Descri

tion

The Electro-Voice®ZxA5 high powered loudspeakers are fully integrated audio systems with

carefully matched electronics and transducers. These products make it easy to setup a high

quality sound system quickly with a minimum amount of cables and external electronics. You won’t

find a speaker system available on the market that offers the unbelievable sound, incredible

flexibility and tremendous output capability of the ZxA5 anywhere near it’s size and weight.

System Features - ZxA5

·Integrated Amplifie

with 1000W LF, 250W HF

·Selectable 100 Hz High Pass

·XLR and 1/4” TRS Input Connector

·XLR Output Connector

·PowerCon Connector with Slave Through

·DVX3150 15” LF Transducer with Forced Air Cooling

·ND2 2” Voice Coil, 1” Exit Neodymium Compression Driver

· Two Models: 60° x 60° or 90° x 50° Coverage Patterns

·High Sensitivity, 133 dB Maximum SPL

· Adjustable Monitor Angle (45° or 55°)

·3 Anchor Plates for Single Stud Fitings and 10 Integral Suspension Points

·Full Line of Accessories

stem Covera

e - ZxA5

Cove

age Patterns and

pplications

ZxA5-60 60° x 60° coverage for long-throw and cluster applications

ZxA5-90 90°

50° for wide

covera

shorte

distances

Figure 1a:

3D EASE Directivity Balloon,

ZxA5-60, 60° x 60° Coverage

Figure 1b:

3D EASE Directivity Balloon,

ZxA5-90, 90° x 50° Coverage

ELECTRO-VOICE

ZxA5 Owne

’

s Manual

stem Setu

- ZxA5

To get the ZxA5 into operation as quickly as possible, please observe the following steps and

precautions:

·Plug the 3-terminal PowerCon AC cable into a grounded line receptacle. Extension cords can be

used to lengthen the AC cable as necessary but make sure that they are 3-conductor 14 gauge or

greater, and that they are properly grounded to avoid electrical hazards and extraneous noise.

·Be sure that the ZxA5 is plugged into an AC power source that is capable of supplying the correct

voltage. If the line voltage drops too much, the built-in amplifiers won’t be able to develop their

rated power and sound quality will suffer. Under high signal conditions, the 120V ZxA5 amplifier

can draw 3 - 4 amps of current (2 amps at 240V). That means that no more than

(3) ZxA5 systems should be plugged into a single 15 amp electrical service. Be cautious of what

else is plugged into the same electrical service line to avoid electrical problems and poor

performance.

CAUTION: Before turning the power on, make sure that the level controls are down to

avoid t

ansients o

unex

ected loud sound.

ZxA5 Am

lifie

Input Signal Connector

Electronically balanced inputs

for the connection of high-

level signal sources such as

mixers, signal

processors, etc. Establishing

the connection is possible via

a combinaton 1/4” TRS and

XLR jack. Balanced

connection is recommended

to prevent noise or HF-

interference.

CAUTION: Before connecting or

disconnecting any plugs, make sure to set

the level control to its counterclockwise

stop, which prevents the system and

audience from contact pops and noise.

Output Signal Connector

Output is full bandwidth pass

through. Figure 2:

lifier Panel, ZxA5

5ELECTRO-VOICE

ZxA5 Owne

’

s Manual

ZxA5 Am

lifie

(

cont’

)

ossove

Mode Switch

Selects between 40 Hz highpass filter for Fullrange

use, and 100 Hz highpass filter for use with a

subwoofer. It is not recommended that you use a

ZxA5 in Fullrange mode with subwoofers.

Level

This control sets the output level of the ZxA5 in a

range between -

∞

dB and +6dB. The internal power

amplifier provides a nominal input sensitivity of

+6dBu.

Power Switch

C switch for switching the ZxA5’s power ON or

OFF. The switch lights after turning the power ON.

If the switch is not lit upon turning the power on,

make sure that the AC cord is correctly connected.

If the AC cord is correctly connected and the AC

switch does not light upon power-on, please

contact your local dealer.

Mains In

C connection is established via a PowerCon

connector. A 15’ (5m) long AC cord with PowerCon

plug is supplied.

Mains Out

The PowerCon AC out socket allows the

connection of additional ZxA5 Systems.

To prevent AC network overload, connecting more

than (3) ZxA5 Systems to a single AC outlet (10A -

16A

)

is not recommended.

CAUTION:

This appliance has no user-serviceable parts inside. Leave any servicing

and maintenance to

ualified se

vice technicians onl

ELECTRO-VOICE

ZxA5 Owne

’

s Manual

CAUTION:

Blue and grey PowerCon power connector shall not be engaged or

disengaged when under load or live.

Sus

endin

ZxA5 S

eake

stems

ZxA5 enclosures have 5 steel anchor points internally mounted on the top, bottom, and rear.

Single stud fittings can be attached to these anchor plates and used as suspension points. Each

of these anchor plates also has a M8 thread to accept rated forged M8 shoulder eyebolts. In

addition to these points there are five additional M8 threaded points; two on the handle side, and

three on the rear. These points can be used for suspending ZxA5s vertically, horizontally,

individually, in clusters, or to attach to EV mounting brackets. Working load limits for the ZxA5 and

fittings are shown in Figure 3.

Figure 3:

Workin

Load

Limit Ratin

of ZxA5 S

eaker S

stem

Prior to each use, inspect the grid assembly or suspension point(s) and associated hardware for

any cracks, deformations, broken welds, corrosion, missing or damaged components which could

reduce the grid assembly or suspension point(s) strength. Replace any damaged hardware. Never

exceed the limitations or maximum recommended load intended for grid assembly design or

suspension point(s). As an added safety measure, it is suggested that the user install a second

suspension point back to the grid (or building structural supports). This redundant safety point

should have as little slack as possible (less than one inch is preferable).

Prior to each use, inspect the loudspeaker enclosures for any cracks, deformations, missing or

damaged components, which could reduce enclosure strength. Inspect the bracket assembly on

the enclosures for any cracks, deformations, missing or loose screws which could reduce the

flying hardware strength. Replace any loudspeaker systems that are damaged or missing

hardware. Never exceed the limitations or maximum recommended load for the ZxA5 systems.

7ELECTRO-VOICE

ZxA5 Owne

’

s Manual

Sus

endin

ZxA5 S

eake

stems

(

cont’

)

ZxA5 M8 Suspension Points

Metric (M8) inserts are equipped on the top and bottom of the enclosure, around the handle, and

on the back of the enclosure for a total of 10 points. The inserts can be used to attach forged

eyebolts or rigging brackets.

(2) M8 Suspension Points

(Single-Stud Anchor Plate

Remo

al Re

uired

)

(2) M8 Suspension Points

(

Decal Remo

al Required

)

(2) M8 Suspension Points

(

Decal Remo

al Re

uired

)

(2) M8 Suspension Points

(Removal of Handle Bolts

Required

)

(2) M8 Suspension Points

(Single-Stud Anchor Plate/

Decal Removal Required)

Figure 4a:

ZxA5 M8 Sus

ension Point

(

, Handle, Rear

)

Figure 4b:

ZxA5 M8 Sus

ension Point

(

Bottom

)

ELECTRO-VOICE

ZxA5 Owne

’

s Manual

Sus

endin

ZxA5 S

eake

stems

(

cont’

)

Suspending the ZxA5 using optional Elect

oice Single-Stud Rigging Kits

The ZxA5 is shipped with three single-stud anchor plates for rigging with single-stud rigging. There

are two more locations on the bottom to mount single-stud anchor plates for flying the ZxA5

upside-down orhorizontally.Alloftheselocations

can facilitate M8 Eyebolts if desired as well.

Figure 5:

Suspending the ZxA5 Using Included Single-Stud

Anchor Plates

Kit Used (Left View) -

SSK-1 Single-Stud Rigging Kit

(

)

Kits Used (Right View) -

SSK-1 Single-Stud Rigging Kit

(

)

EBK-3 Forged M8 Eyebolt Kit (x1)*

*EB

-3 on Bottom of

Enclosure

(

not shown, see Fi

ure 3b

)

Ste

1: Remove Decals Step 2: Attach Single-Stud Anchor Plates

Removed from the Top of the Enclosure or

optional RK-Z Kit (shown) or Eyebolts (not

shown)

Figure 6:

Suspending the ZxA5 Upside-Down Using

Included Single-Stud Anchor Plates and Single-

Stud Rigging Kit

Kits Used

RK-Z Single-Stud Anchor Plate Kit

(

)

SSK-1 Single-Stud Rigging Kit (x1)

9ELECTRO-VOICE

ZxA5 Owne

’

s Manual

Andere Handbücher für ZxA5-90

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Electro-Voice Sprecher Handbücher

Electro-Voice

Electro-Voice EVID-C4.2LP Bedienungsanleitung

Electro-Voice

Electro-Voice QRx 115/75 Bedienungsanleitung

Electro-Voice

Electro-Voice SRO/15L Dimensionsleitfaden

Electro-Voice

Electro-Voice EVA-2082S/1220 Bedienungsanleitung

Electro-Voice

Electro-Voice ELX200-12 Bedienungsanleitung

Electro-Voice

Electro-Voice SxA Series Bedienungsanleitung

Electro-Voice

Electro-Voice ZX1-90 Bedienungsanleitung

Electro-Voice

Electro-Voice Xi Series Xi-2153A/64F Bedienungsanleitung

Electro-Voice

Electro-Voice 209-4T Bedienungsanleitung

Electro-Voice

Electro-Voice UW30 Bedienungsanleitung

Electro-Voice

Electro-Voice ZX1i Series Bedienungsanleitung

Electro-Voice

Electro-Voice X-Array XN Bedienungsanleitung

Electro-Voice

Electro-Voice EVID-PC6.2E Installations- und Betriebshandbuch

Electro-Voice

Electro-Voice EVX-180B Bedienungsanleitung

Electro-Voice

Electro-Voice Xi Series Xi-1153A/64F Handbuch

Electro-Voice

Electro-Voice Michigan MC12 Dimensionsleitfaden

Electro-Voice

Electro-Voice Xi Series Xi-2123A/106F Handbuch

Electro-Voice

Electro-Voice ZX5 Bedienungsanleitung

Electro-Voice

Electro-Voice Xw12A Bedienungsanleitung

Electro-Voice

Electro-Voice PXM-12MP Series Bedienungsanleitung

Electro-Voice

Electro-Voice T252 Montageanleitung

Electro-Voice

Electro-Voice ZX Series ZX1i Gebrauchsanweisung

Electro-Voice

Electro-Voice DL18MT Bedienungsanleitung

Electro-Voice

Electro-Voice Xlc Series Xlc-127DVX Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung

Tannoy

Tannoy SYSTEM 600a Bedienungsanleitung