This document is a property of ElectroFlip LLC (www.ElectroFlip.com).
No unauthorized reproduction is allowed.
6
1. Turn off SPYdrive and connect it to your computer’s USB port.
2. Open ”My Computer” and look for the removable disk drive that pertains to your
device.
3. Open the removable disk drive and look for “time.txt” file. This file should be found
under the root directory of the memory card.
4. Edit the date and time. The format should be YYYY-MM-DD hh:mm:ss. The time is in
military format, please see example below.
2013-05-21 13:40:30
5. Then, click File and click Save to save the changes made.
6. Safely remove the device from the computer and disconnect it from the USB port. Then,
turn on the device.
7. Record a video to check the date and time stamp.
LED LIGHT INDICATOR
MEMORY
Indicator light shuts off after flashing for 3 times
Indicator light shuts off after flashing for 6 times
BATTERY
Indicator light shuts off after flashing (default way) for 3 times
Charging Indicator light flashes slowly
Indicator light stays turned on and solid.
Operation
Indicator light stays solid.
Video Recording Indicator light flashes slowly.
TROUBLESHOOTING
Below are possible issues that you may encounter when using the device. If the issue you are
having is not on the list you may visit our FAQ section (http://help.electroflip.com/index.php)or
you can contact us through our website, www.ElectroFlip.com, and go to our Contact Us page.
You may also give us a call at our Customer Support number 1-877-686-7495.
1. Why is my device not recording?
The device does not have a built-in memory so it is a must that a memory card needs to
be inserted first before using the device. Make sure to format the memory card if the
card has been used by a different device then properly insert it into the device.
2. I’ve tried setting up the date and time but couldn’t find the time.txt file in the
root directory of the micro SD card. How can I set the date and time?
If the file time.txt is nowhere in the root directory of the memory card, what you can do
is open Notepad and type the date and time. Follow the format YYYY-MM-DD hh:mm:ss
(time in military format). Then, save the file under the root directory of the memory card
with the file name time.txt. Safely, remove the device from the computer and unplug it
from the computer. Turn on the device and record a video to check if the date and time
has been stamped.
