Electrohome EB30 Bedienungsanleitung
McKinley Powered Bookshelf Speakers
(Model: EB30)
User Manual v1.0
QUESTIONS?
Give us a chance to help, we’re just a click away
Electrohome.com/videos
Electrohome.com/resources
Electrohome.com/support
Electrohome.com/registration
Electrohome.com/contact
Scan this QR code for easy setup
instructions, videos, and frequently
asked questions.
Need Help?
INTRODUCTION
Since 1907 Electrohome has been developing high delity audio products
& has been welcomed into homes for generations. One thing that remains
the same in our more than 100 year history is our unmatched dedication
to design and premium craftsmanship.
Thank you for your purchase of this Electrohome®product.
We hope you enjoy your experience.
BREAK-IN PERIOD
Our speakers have a butyl rubber ring surrounding the cone. The break-in
period allows the rubber to loosen and stretch, allowing the cone a larger
range of movement, which gives a better sound reproduction. We recommend
10-12 hours of play at moderate volume to achieve this.
Don’t forget to register your product with us!
Bookshelf Speakers
Quick Start Guide 1 Year WarrantyLifetime Customer
Support
8 ft. Speaker WirePower CordRemote Control
LIFETIME
Customer Support
4 ft. RCA to
Aux Cable
WHAT’S INCLUDED
TABLE OF CONTENTS
What’s Included ..........................................................................................................................3
Product Information..................................................................................................................4
First Time Setup ..........................................................................................................................5
Turning On/O Unit ..................................................................................................................6
Source Selection.........................................................................................................................6
EQ Adjustment ............................................................................................................................7
RCA Input ......................................................................................................................................7
Bluetooth Pairing........................................................................................................................8
Aux Input.......................................................................................................................................9
Frequently Asked Questions ................................................................................................10
Troubleshooting .......................................................................................................................10
Specications.............................................................................................................................11
Warranty Information .............................................................................................................12
Remote Control
1. Power On/O
2. Volume Up/Down
3. Bass Up
4. Bass Down
5. Mute
6. Tap: Play/Pause
Hold: Bluetooth Reset
7. Previous/Next Track
8. Source
9. Treble Up
10. Treble Down
11. Reset EQ
Front & Back Panel
12. Tweeter
13. Woofer
14. Control Knob
15. LED Indicator
16. IR Sensor
17. RCA Input
18. AUX Input
19. Bluetooth Pairing Reset
20. Power Input
21. Speaker Wire Output
22. Speaker Wire Input
LED Indicator
PRODUCT INFORMATION
RESET
AC 120V~60Hz
AUX
IN
RCA IN
LR
12
13
14
15
16
1
3
4
5
9
10
6
11
8
27
17
18
19
20
21
22
Color Meaning
Flashing BLUE Bluetooth Pairing Mode
Solid BLUE Bluetooth Paired
Solid GREEN RCA Source
Solid YELLOW AUX Source
Flash RED 2x Min or Max EQ Setting
Solid RED Standby
Flash SOURCE 2x Mid EQ Setting
Passive Speaker Active Speaker
FIRST TIME SETUP
1. Position the speakers with the Active Speaker on the right and the Passive
Speaker on the left.
NOTE: If placing the speakers in a cabinet or on a shelf, position the front of the speakers
as close as possible to the front edge of the shelf for optimum audio performance.
NOTE: The included speaker wire is 8ft. If placing your speakers further than 8ft
apart it is recommended to use standard 22 gauge speaker wire to connect the
speakers over the longer distance.
2. Connect the speaker wire to the spring clips on the back of the Active
Speaker and connect the other end of speaker wire to the spring clips on
the back of the Passive Speaker.
IMPORTANT: Ensure each wire is connected to the same color binding post on
each speaker. Positive (+) to positive (+) and negative (-) to negative (-).
3. Connect the power cable to the back of the Active Speaker and connect
the other end to a power outlet.
RESET
AC 120V~60Hz
AUX
IN
RCA IN
LR
2
1
Active Passive
TURNING ON/OFF UNIT
SOURCE SELECTION
Press the Control Knob to turn on
the unit. Hold to turn o the unit.
Press the Control Knob to cycle
through the audio inputs.
The Source LED will show the below
color for each source:
(Blue) Bluetooth (Green) RCA (Yellow) Aux
Press
VOL +
++
VOL -
TREBLE BASS
on the Remote to turn
the unit on/o.
Press
VOL +
++
VOL -
TREBLE BASS
on the Remote to cycle
through the audio inputs.
OR
OR
RESET
AC 120V~60Hz
AUX
IN
RCA IN
LR
RCA INPUT
EQ ADJUSTMENT
1. Connect an RCA cable to your
source device (Turntable,
Smartphone, Computer…).
3. Press the Control Knob to select
the RCA input (Green LED).
2. Connect the other end of the
RCA cable to the back of the
Active Speaker.
4. Adjust volume on EB30 as well as
source device.
IMPORTANT: When connecting a turntable, a phono preamplier must be used.
Preamps are often built into turntables but can also be standalone devices. If your
turntable has extremely low volume, a preamp may be needed.
Note: The included RCA to Aux cable can also be used.
Use the Bass/Treble buttons on the Remote to adjust each from -5 to +5.
LED Behavior:
*NOTE: The Status LED will ash the input color when Bass/Treble is set to 0.
Red (Flash 2x) - Bass/Treble set to -5 or +5
Input Color (Flash 2x) - Bass/Treble set to 0*
BLUETOOTH®PAIRING
1. Press the Control Knob to
select the Bluetooth input
(Blue LED).
3. Use the Remote to control
playback on your source device
Note: Adjust Volume on the source
device as well as the EB30.
2. Pair to “Electrohome EB30” on
your source device.
Bluetooth
MY DEVICES
Settings
Electrohome EB30
Note: Unit will attempt to auto-pair to
the last paired device.
RESET
AC 120V~60Hz
AUX
IN
RCA IN
LR
Note: How you access your device’s
Bluetooth® settings may vary from
one manufacturer to another.
Maximum line of sight for Power
Class 2 Bluetooth® range is
33ft. Obstacles may decrease
transmission distance.
OR
4. If your device cannot nd
“Electrohome EB30”, you can
reset Bluetooth® pairing:
• Press and hold PAIR for 3 seconds
to reset Bluetooth® pairing.
• Press and hold the Bluetooth®
Pairing Reset Button on the
back of the unit.
AUX INPUT
1. Connect the AUX cable to your
source device (Smartphone,
Computer…).
2. Connect the other end of the
AUX cable to back of the Active
Speaker.
RESET
AC 120V~60Hz
AUX
IN
RCA IN
LR
3. Press the Control Knob to select
the AUX input (Yellow LED).
4. Adjust volume on EB30 as well as
source device.
Note: The included RCA to Aux cable can also be used.
FREQUENTLY ASKED QUESTIONS
TROUBLESHOOTING
What is “auto-pairing” and how does it work?
Auto-pairing is a convenient connection feature. If the connected Bluetooth®-
enabled device leaves the connection range of the EB30 and returns at a
later time, the device will automatically connect. If the device’s Bluetooth®
function is disabled and then enabled at a later time, the device will
automatically connect as well.
Note: The Electrohome EB30 will only auto-pair to the last device that it
was connected to.
Why are my speakers quiet?
Ensure the EQ settings on your source device and app are set to at. Also
ensure Volume Normalization is disabled. If using the EB30 with a turntable,
conrm a preamp is enabled or added.
How do I clean the speakers?
To clean the speakers, use a dry lint free microber cloth.
Can I use these speakers with a turntable?
Absolutely! These speakers will make a great addition to your turntable setup.
If your turntable does not have a built-in preamp, you will need an external
one.
No Power
• Ensure the LED Brightness is not set to OFF
• Check all connections on power adapter and ensure fully inserted
No Audio
• Check volume on the EB30 and ensure it is above 0
• Check volume on the source device and ensure it is above 0
• Conrm the EB30 is set to correct source
• Ensure all cables are connected properly and fully inserted
No Audio from Passive Speaker
• Check speaker wire connections between speakers and ensure securely
connected to binding posts
Andere Handbücher für EB30
1
Inhaltsverzeichnis
Andere Electrohome Sprecher Handbücher
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung