Electrolux IC44819FFS Bedienungsanleitung

051020xx/GB

20.17

Installation manual

Feeder Ironer Folder

& Stacker

IC44819FFS – IC44825FFS – IC44832FFS

Translated from french

0209

Notice Date Page

05102004

INSTALLATION

MANUAL 0. Table of contents

General instructions

Environmental information ........................................................................................... 1/1

Preliminary instructions ................................................................................................ 1/2

Locking and tagging procedure .................................................................................... 1/3

Handling/Weight

Handling ....................................................................................................................... 1/4

Packing - Weight .......................................................................................................... 1/5

Technical characteristics

Technical characteristics .............................................................................................. 1/6

Sound level .................................................................................................................. 7/6

Label of energetic performances .................................................................................. 7/6

Installation/Putting into service

Working place lighting .................................................................................................. 1/7

Supplies ....................................................................................................................... 1/7

Unpacking .................................................................................................................... 1/7

Remove of the transport locks tted ............................................................................. 2/7

Installation .................................................................................................................... 4/7

Mechanical installation ................................................................................................. 5/7

Electrical connection .................................................................................................... 7/7

Steam connection ........................................................................................................ 13/7

Gas connection ............................................................................................................ 15/7

Connection of the evacuation system .......................................................................... 23/7

Connection of the stacker ............................................................................................ 28/7

Compressed air connection ......................................................................................... 29/7

Operating inspection

Direction of the rotation checking ................................................................................. 1/8

Appendices

Washing symbols ......................................................................................................... 1/9

Conversion measurement units ................................................................................... 1/9

Pages/Chapters

The manufacturer reserves the right to modify construction and equipment characteristics.

0708 1 0

Notice Date Page

05102004 INSTALLATION

MANUAL

This page is left blank on purpose.

0. Table of contents

0308 1 1

Notice Date Page

05102004

INSTALLATION

MANUAL

Environmental information

Concerned by providing the end user with useful and necessary environmental information, we

wish to precise :

 Data about energetic consumptions, wastes (atmospheric and liquid) and sound level are

indicated in the paragraph "Technical characteristics".

 Forseeing its recycling, this machine is fully dismantle.

 This machine is free from any asbestos.

 Our machine packing complies with the provisions of rule 98-639 dated July 20th 1998

regarding environmental demands.

For additional information, do not hesitate to consult our environmental department.

Scrapping of machine

When the machine is no longer to be used, it must be submitted to a recycling facility for destruction. The

majority of the components in the machine can be reused, but it also contains other material that must be

taken care of in the correct way. Therefore, never mix the machine or its parts with domestic waste as this

may lead to health hazards or damage to the environment.

1. Environmental

information

0608 2 1

Notice Date Page

05102004 INSTALLATION

MANUAL

This page is left blank on purpose.

1. Environmental

information

0308 1 2

Notice Date Page

05102004

INSTALLATION

MANUAL

A ash of lightning with an arrow at

its end displayed inside an equilateral

triangle, warns the user about the

presence of uninsulated "dangerous

current" sufcient in intensity to cause

electrocution.

An exclamation mark inside an

equilateral triangle offers the user

important advice about usage, servicing

and hazardous conditions.

This symbol warns the user that there

are mechanisms inside the machine

which can be dangerous. The protective

housing must be in place during use.

This symbol warns the user of the

presence of high temperatures which

could cause severe burns. Some

surfaces can reach close to 200 °C

(392 °F).

Explanation of graphic symbols

Preliminary instructions

Before any use, it is compulsory to read the instruction handbook.

Users must have learnt how the machine operates.

In order to prevent any risk of re or explosion, ammable products should never be used to

clean the machine.

Any repair or maintenance intervention should be carried out by qualied personnel only.

2. Preliminary instruction

0308 2 2

Notice Date Page

05102004 INSTALLATION

MANUAL

2. Preliminary instructions

SAFETY

The mechanical and electrical installation

of the machine should only be done by

qualied personnel.

CAUTION

Do not use the machine unless it is

plugged into a correctly earthed power

socket complying with standards in

force.

CAUTION

For your personal safety, never use

the machine without the protective

housings.

CAUTION

Disconnect the machine electrical

power supply before doing any repair or

servicing work.

CAUTION

This machine should be installed

in conformance to the health and

safety regulations, and only used in a

sufciently aerated area.

Check the instructions before installing

or using the machine.

Disconnect all sources of energy and let the ironing cylinder cool down before any

intervention on the machine.

The high temperature of the ironing cylinder may cause serious burns ; avoid touching the hot

surfaces.

Never iron if the nger protection does not function.

The machines comply with the European Directive EMC (Electromagnetic Compatibility). They

have been tested in laboratory and approved as such. It is so prohibited to add wires or non

shielded electric cables in the cabinets, strands or cables' troughs.

0814 3 2

Notice Date Page

05102004

INSTALLATION

MANUAL

It is specially advised not to install the machine on a synthetic oor

covering. The frictional electricity may hinder the good working of

the machine.

Under no circumstances should a gas-heating machine be installed

in a building which includes a dry-cleaning machine.

This is particularly important for your safety and that of others.

The consequence is an immediate cancellation of the warranty.

The machine can work without the protective casing when the

electric supply is not cut off.

Interlock the main isolating switch with a padlock.

Close the steam inlet valves.

If you detect gas smells, turn off the gas, open the windows, do not

activate any switch and warn the maintenance service.

The warranty might be cancelled if these instructions are not

complied with.

2. Preliminary instructions

CAUTION

For your own safety, it is prohibited and dangerous to solder the

ironing cylinder. If a leak occurs, never try to repair it yourself.

Ask our technical departments for advice.

IMPORTANT

When using the machine in automatic folding mode, you could

catch your ngers when the sheet removal actuator ascends/

descends with the anti-static device and in folding arm

movements.

Do not operate on the machine without powering down

beforehand.

0608 4 2

Notice Date Page

05102004 INSTALLATION

MANUAL

2. Preliminary instructions

This page is left blank on purpose.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Electrolux Faltmaschine Handbücher

Electrolux

Electrolux IC4 4819 FFS Bedienungsanleitung

Beliebte Faltmaschine Handbücher anderer Marken

Mathias Bauerle

Mathias Bauerle Multipli 35 Bedienungsanleitung

Intelli-Fold

Intelli-Fold DF-304C Bedienungsanleitung

Pitney Bowes

Pitney Bowes DI425 FastPac Handbuch

Hwasung

Hwasung COMPODIS HMK-830 Series Bedienungsanleitung

KRUG+PRIESTER

KRUG+PRIESTER IDEAL 8306 Bedienungsanleitung

XPOtool

XPOtool 61574 Bedienungsanleitung

MBM

MBM 306A Bedienungsanleitung

Formax

Formax FD 342 Bedienungsanleitung

Formax

Formax FD 332 Bedienungsanleitung

MBM

MBM FO0601 Bedienungsanleitung

IMS

IMS FPi4000 Bedienungsanleitung

Nagel

Nagel Foldnak 80 Bedienungsanleitung

MBM

MBM S 352 Bedienungsanleitung

Count

Count KF-250 Bedienungsanleitung

Formax

Formax AutoSeal FD 1500 Plus Bedienungsanleitung

Opus

Opus multiCREASE 52 Bedienungsanleitung

KRUG+PRIESTER

KRUG+PRIESTER IDEAL 8306 Bedienungsanleitung

Martin Yale

Martin Yale 1217a Bedienungsanleitung