Electrolux 98030KF-SN Bedienungsanleitung

98030KF-SN

User manual Ceramic glass induction

hob

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this

instruction manual carefully. It will enable you to navigate all processes perfectly

and most efficiently. To refer to this manual any time you need to, we recommend

you to keep it in a safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

Contents

Operating instructions 2

Safety Information 2

Description of the appliance 4

Operating the appliance 6

Tips on cooking and frying 11

Cleaning and care 13

What to do if... 14

Disposal 16

Installation instructions 16

Safety information 16

Service 19

Subject to change without notice

Operating instructions

Safety Information

WARNING!

Please comply with these instructions. If you do not, any damage resulting is not covered

by the warranty.

Correct use

• This appliance is not intended for use by children or other persons whose physical, sensory

or mental capabilities or lack of experience and knowledge prevents them from using

the appliance safely without supervision or instruction by a responsible person to ensure

that they can use the appliance safely.

• Do not leave the appliance unattended during operation.

• This appliance should be used only for normal domestic cooking and frying of food.

• The appliance must not be used as a work surface or as a storage surface.

• Additions or modifications to the appliance are not permitted.

• Do not place or store flammable liquids, highly inflammable materials or fusible objects

(e.g. plastic film, plastic, aluminium) on or near the appliance.

Children’s safety

• Small children must be kept away from the appliance.

• Only let bigger children work on the appliance under supervision.

2Contents

• To avoid small children and pets unintentionally switching the appliance on, we recom-

mend activation of the child safety device.

General safety

• The appliance may only be installed and connected by trained, registered service engi-

neers.

• Built-in appliances may only be used after they have built in to suitable built-in units

and work surfaces that meet standards.

• In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches

or splits), the appliance must be switched off and disconnected from the electrical supply,

to prevent the possibility of an electric shock.

• Repairs to the appliance must only be carried out by trained registered service engineers.

Safety during use

• Remove stickers and film from the glass ceramic.

• There is the risk of burns from the appliance if used carelessly.

• Cables from electrical appliances must not touch the hot surface of the appliance or hot

cookware.

• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!

• Switch the cooking zones off after each use.

• Users with implanted pacemakers should keep their upper body at least 30 cm from

induction cooking zones that are switched on.

• Risk of burns! Do not place objects made of metal, such as knives, forks, spoons and

saucepan lids on the cooking surface, as they can get hot.

Safety when cleaning

• For cleaning, the appliance must be switched off and cooled down.

• For safety reasons, the cleaning of the appliance with steam jet or high-pressure cleaning

equipment is not permitted.

How to avoid damage to the appliance

• The glass ceramic can be damaged by objects falling onto it.

• The edge of the glass ceramic can be damaged by being knocked by the cookware.

• Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the

glass ceramic if pushed across the surface.

• Objects that melt and things that boil over can burn onto the glass ceramic and should

be removed straightaway.

• Do not use the cooking zones with empty cookware or without cookware.

• To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans

to boil dry.

• The ventilation gap of 5mm between the worktop and front of the unit underneath it

must not be covered.

Safety Information 3

Description of the appliance

Cooking surface layout

1 2 3

1Induction cooking zone 2300 W, with power function 3200 W

2Induction cooking zone 2300 W, with power function 3200 W

3Induction cooking zone 2300 W, with power function 3200 W

4Control panel

The cooking surface is divided into three cooking zones. In each cooking zone under the

glass ceramic is an induction heating element, the middle of each one being marked with

a cross on the glass ceramic surface. Cookware can be placed on any of the cooking zones.

But the cross must be completely covered by the cookware. The bottom of the cookware

must be from 125 - 210 mm in diameter.

Control panel layout

1 2 3 4 5

6789

1Child lock with a pilot light

2Stop+Go with a pilot light

3Cooking zone indicators Timer function

4Timer display

5Timer

6Heat setting indicator

7Heat setting selection

8Power function

9On/Off with indicator

4Description of the appliance

Touch Control sensor fields

The appliance is operated using Touch Control sensor fields. Functions are controlled by

touching sensor fields and confirmed by displays and acoustic signals. Only touch the sensor

fields which activate a desired function. Do not cover other sensor fields.

If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance

switches itself off.

Sensor field Function

On / Off Switches appliance on and off

Child lock Locking control panel for children

STOP+GO To switch the Keep Warm setting on/ off

Power Switching the power function on and off

Timer Timer selection

Increase settings To increase Timer time

Reduce settings To reduce Timer time

Displays

Display Description

The cooking zone is switched off

Keep Warm settings Keep Warm / STOP+GO function is switched on

- Heat settings To set heat settings

Auto Warm-up The Auto Warm-up function is switched on

+ digit Fault Malfunction has occurred

Pan detection Cookware is unsuitable or too small or no cookware

has been placed on the cooking zone

Residual heat Cooking zone is still hot

Child safety device Lock/Child safety device is set

Power Power function is switched on

Automatic Switch off Switch off is active

Residual heat indicator

WARNING!

Risk of burns from residual heat. After being switched off, the cooking zones need some

time to cool down. Look at the residual heat indicator .

Residual heat can be used for melting and keeping food warm.

The induction cooking zones create the heat required for cooking directly in the base of

the cookware. The glass ceramic is merely heated by the residual heat of the cookware.

Description of the appliance 5

Control bar

The control bar is a special Touch Control field. The

control bar is touched where the desired heat set-

ting is positioned. The heat setting is shown in the

display. Correct to the left or the right, if neces-

sary. Do not release before the desired heat setting

is reached.

If the control bar is touched for longer than 6

seconds, a signal sounds and the appliance

switches itself off.

Operating the appliance

Use the induction cooking zones with suitable cookware.

Switching the appliance on and off

Control panel Display Pilot light

Switch on Touch for 1 second / lights up.

Switch off Touch for 1 second / none goes out.

After switching on, within approx. 10 seconds a heat setting or a function must be set,

otherwise the appliance automatically switches itself off.

Setting the heat setting

Control panel Display

To set the heat

setting

Touch the desired heat setting, if necessary, correct

up or down

/ to

Switch off Touch

Locking/unlocking the control panel

The control panel, with the exception of the “On/Off” sensor field, can be locked at any time

in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.

Control panel Display

To switch on Touch (for 4 seconds)

To switch off Touch previously set heat setting

When you switch the appliance off, the locking function is automatically switched off.

Turning the STOP+GO function on and off

The STOP+GO function simultaneously toggles all active cooking zones to keep-warm mode

then back to the heat setting they were at before

6Operating the appliance

Control panel Display

To switch on Touch

To switch off Touch Previous heat setting (not automatic warm-up or power

function)

STOP+GO does not stop timer functions.

STOP+GO controls the entire control panel apart from the sensor field .

Using the automatic warm-up function

All cooking zones are equipped with an automatic warm-up function. When setting a heat

setting using the automatic warm-up function, the cooking zone switches to full power

for a certain amount of time and then automatically switches back to the heat setting set.

Step Control panel Display

1. Touch

2. Move your finger down

from to select the

desired heat setting be-

tween and

/ after 5 seconds . As long as is displayed, the

appliance works at full power. After the automatic warm up is

completed, the heat setting / is displayed again.

The length of time that the automatic warm up function operates depends on the heat

setting selected.

Heat setting Length of the automatic warm up [min:sec]

0:12

1:21

3:07

4:24

5:51

8:12

10:12

10:36

2:01

2:28

2:52

Operating the appliance 7

Heat setting Length of the automatic warm up [min:sec]

---

Using the child safety device

The child safety device prevents unintentional use of the appliance.

Switching on the child safety device

Step Control panel Display/Signal

1. Switch on appliance. Do not set a heat setting.

2. Touch for 4 seconds

The child safety device is switched on.

Switching off the child safety device

Step Control panel Display/Signal

1. Switch on appliance. Do not set a heat setting.

2. Touch for 4 seconds lights up

3. Switch appliance off.

The child safety device is switched off.

The child safety device can only be switched on and off if no heat setting is set.

Overriding the child safety device

The child safety device can be switched off in this way for a single cooking session; it remains

activated afterwards.

Step Control panel Display/Signal

1. Switch appliance on

2. Touch for 4 seconds lights up

Until the appliance is next switched off, it can used as normal. After switching off the appliance,

the child safety device is active again.

After overriding the child safety device, a heat setting or a function must be set within

approx. 10 seconds, otherwise the appliance automatically switches itself off.

Switching the power function on and off

The power function makes more power available to the induction cooking zones, e.g. to

bring a large quantity of water to the boil quickly. The power function is activated for 8

minutes at most. After that the induction cooking zone automatically switches back to heat

setting 14.

Control panel Display

To switch on Touch

8Operating the appliance

Control panel Display

To switch off Touch a heat setting /

Power Management

The cooking zones of the cooking surface have a

maximum power available to them. Maximum

power is reached if all cooking zones are set to a

heat setting of 14. Two cooking zones make up a

pair (see figure).

Between these cooking zones the maximum pow-

er available is distributed by the Power Manage-

ment. If the Power function is set for a cooking zone, the additional power needed for this

cooking zone is transferred by the Power Management reducing the power of the other

cooking zone in the pair.

Example: heat setting 14 is selected on a cooking zone. The Power function is switched on

for the cooking zone paired up with it. The Power function is performed, but heat setting

14 on one cooking zone and Power function on the other cooking zone of a pair exceeds

the maximum output for both. Therefore Power Management reduces the first cooking

zone that was switched on from 14 to 5, for example, and the display for this cooking zone

alternates between 14 and 5 and then remains on the current maximum of 5. (Whether

the display alternates between 14 and 5 or 14 and 3 or other values, depends on the

appliance type and the size of the cooking zone.)

Using the timer

Function Condition Outcome after the time has

elapsed

Automatic cut-out a heat setting is set acoustic signal

flashes

Cooking zone switches off

Countdown timer cooking zones not in use acoustic signal

flashes

If just one countdown value is set you can change it only when the appliance is switched

on.

If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking

zone is switched off after the time set has elapsed.

If a cooking zone is switched off, the timer function set is also switched off.

Selecting a cooking zone

Step Control panel Display

1. Touch once Pilot light of the first cooking zone flashes

Operating the appliance 9

Step Control panel Display

2. Touch once Pilot light of the second cooking zone flashes

4. Touch once Pilot light of the third cooking zone flashes

If other timer functions are set, after a few seconds the shortest remaining time of all the

timer functions is displayed and the corresponding pilot light flashes.

Setting the time

Step Control panel Display

1. Select cooking zone Pilot light for the cooking zone selected

flashes

2. Touch or /

minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

Switching off the timer function

Step Control panel Display

1. Select cooking zone Pilot light of cooking zone selected flashes faster

Time remaining is displayed

2. Touch The time remaining counts backwards to

The pilot light goes out.

The Timer function for the selected cooking zone is switched off.

Changing the time

Step Control panel Display

1. Selecting a cooking zone Pilot light of the selected cooking zone

flashes more quickly

Remaining time is displayed

2. Touch or

minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

Displaying the time remaining for a cooking zone

Step Control panel field Display

1. Select cooking zone Pilot light of the cooking zone selected flashes faster

The time remaining is displayed

After a few seconds the pilot light flashes more slowly.

10 Operating the appliance

Andere Handbücher für 98030KF-SN

Inhaltsverzeichnis

Andere Electrolux Kochfeld Handbücher

Electrolux

Electrolux EHL7640FOK Bedienungsanleitung

Electrolux

Electrolux EHD90230P Bedienungsanleitung

Electrolux

Electrolux EGM6343YAK Bedienungsanleitung

Electrolux

Electrolux EHDP9730IK Bedienungsanleitung

Electrolux

Electrolux LIL61443BW Bedienungsanleitung

Electrolux

Electrolux EHI8742FOK Bedienungsanleitung

Electrolux

Electrolux EHP 60060 X Bedienungsanleitung

Electrolux

Electrolux EHS6640X Bedienungsanleitung

Electrolux

Electrolux EGH6343 Bedienungsanleitung

Electrolux

Electrolux EGT7353NOK Bedienungsanleitung

Electrolux

Electrolux EHG 673 Bedienungsanleitung

Electrolux

Electrolux EHS 7405 K Bedienungsanleitung

Electrolux

Electrolux EHD6690X Bedienungsanleitung

Electrolux

Electrolux Gas Hob Bedienungsanleitung

Electrolux

Electrolux EHF6747FOK Bedienungsanleitung

Electrolux

Electrolux EIP8146 Bedienungsanleitung

Electrolux

Electrolux EHS6610K Bedienungsanleitung

Electrolux

Electrolux EGG 689 Bedienungsanleitung

Electrolux

Electrolux EHG9832X Bedienungsanleitung

Electrolux

Electrolux EQL4520BOG Bedienungsanleitung

Electrolux

Electrolux EHF3320FOK Bedienungsanleitung

Electrolux

Electrolux HOC620F Bedienungsanleitung

Electrolux

Electrolux ehf6342xok Bedienungsanleitung

Electrolux

Electrolux HHOB870S Bedienungsanleitung

Beliebte Kochfeld Handbücher anderer Marken

Siemens

Siemens EX875KYV1E Technisches Datenblatt

AEG

AEG CERAMIC HOB 6010 K Bedienungsanleitung

VALERA

VALERA CT 70A Bedienungsanleitung

Zanussi

Zanussi ZGF 6420 Bedienungsanleitung

Gaggenau

Gaggenau CI 273 Bedienungsanleitung

G3 Ferrari

G3 Ferrari Energy Bedienungsanleitung

Pkm

Pkm IN4B Bedienungsanleitung

Award

Award H903BG Bedienungsanleitung

Zanussi

Zanussi VCH 5005 RZ Bedienungsanleitung

Miele

Miele KM 523 Bedienungsanleitung

Hotpoint

Hotpoint IS67V8CCXT/E Bedienungsanleitung

AEG

AEG HK854870XB Bedienungsanleitung

Cookology

Cookology SEP600BK Bedienungsanleitung

Bauknecht

Bauknecht Hob Bedienungsanleitung

Zanussi

Zanussi ZGM 782 Bedienungsanleitung

dipo INDUCTION

dipo INDUCTION DIBK218S Bedienungsanleitung

Miele

Miele KM 5987 Bedienungsanleitung

Miele

Miele KM 360 G Bedienungsanleitung