Electrolux ERC2805 Bedienungsanleitung

818 20 43--04/5

INSTRUCTION BOOKLET

NOTICE D’UTILISATION

GEBRAUCHSANWEISUNG

ISTRUZIONI D’USO

BRUGSANVISNING

refrigerator / réfrigérateur / kühlgeräte / frigorifero/køleskab

ERC2805

Information on how to minimize environmental impacts is given in this manual.

Electrolux 818 20 43-04/5

Safety instructions GB

Your new fridge may have other functions compared to your previous one.

Carefully read these instructions to learn how the appliance works and how to care for it. Keep the instruction

booklet. It will come in handy if you later sell the cabinet or give it to somebody else.

These warnings are provided in the interests of your safety. Ensure that you understand them all before

installing or using the appliance. Your safety is of paramount importance. If you are unsure about any of the

meanings or warnings contact the Customer Care Department.

For the User

·The cabinet is intended for keeping foodstuff in a

normal household as explained in this instruction

booklet.

·Do not keep explosive gases or liquids in the

refrigerator or freezer compartment. They may

explode and cause injury and material damage.

·Do not let sharp objects come into contact with

the refrigerating system on the back of and inside

the cabinet. If the refrigerating system is

punctured, the cabinet will be damaged and

foodstuff inside may spoil.

·Do not keep carbonised drinks or bottles in the

freezer compartment. The glass bottles may

break.

·The cabinet is heavy. The edges and projecting

parts of the cabinet may be sharp. Be careful

when moving the cabinet and always use gloves.

Child Safety

·Pay attention so that small children do not gain

access to the operating controls or the inside of

the cabinet.

Scrapping old cabinets

When discarding the cabinet, hand it over to a recycling

station. For more information, call your local city office

or your dealer.

Contents GB

Safety instructions 2.................

Scrapping old cabinets 2.......................

Contents 2..........................

Description of the Appliance 3........

Control Panel 3..............................

Before use 3.........................

Using the fridge 3....................

To start the fridge and set the correct temperature 3.

Temperature inside the fridge 4.................

Measuring the temperature 4...................

Switching off 4..............................

Cabinet interior 4............................

Hints and Tips 5.....................

Saving energy 5.............................

Food Storage 5..............................

Protect the environment 5......................

Maintenance and Cleaning 5..........

Removing the ventilation grille 5................

Cleaning 5..................................

Defrosting the fridge 6........................

To Change the Light Bulb 6....................

When the appliance is not in use 6...............

Something Not Working 7............

Guarantee Conditions 8.......................

Service and Spare Parts 8......................

Technical specification 8.............

Installation 8........................

Unpacking 8................................

Remove the transport supports 8................

Mains Cable 9...............................

Cleaning 9..................................

Installing the cabinet 9........................

Door Reversal 10.............................

Electrical connection 10........................

Electrolux 818 20 43-04/5

Description of the

ppliance GB

Model ERC2805

1. glass shelf

2. bottle shelf

3. bottle grips

4. egg holder

5. vegetable drawer

6. ventilation grille

7. butter compartment

8. door shelf + box

9. sliding shelf

10. door shelf

Control Panel

A. Green indicator lamp

Lights when the fridge is operating.

B. Thermostat control

Usetoswitchonandsetthedesiredtemperaturein

the fridge.

Before use GB

Position and clean the cabinet as explained in the section

"Installation".

Check that the drain hose at the rear of the cabinet

discharges into the drip tray.

Before inserting the power plug into the

outlet and switching on the cabinet for

the first time, leave it standing upright

for about 4 hours. Otherwise the

compressor may sustain damage. This

time will allow the oil sufficient time to

return to the compressor.

Using the fridge GB

To start the fridge and set the

correct temperature

Turn the thermostat control to the desired position.

MIN The lowest position of the thermostat control

results in the highest temperature inside the cabinet.

MAX The highest position of the thermostat control

results in the lowest temperature inside the cabinet.

H: Switched off.

Allow the cabinet to run for a period of 24 hours

whenever the temperature setting is changed. This

will allow the temperature to stabilise inside the

cabinet.

Electrolux 818 20 43-04/5

Temperature inside the fridge

A suitable temperature inside the fridge is approx.

+5°C. If the thermostat control is set to a too cold

temperature, food with a high water content may

start to freeze if it has been placed in the coldest

places in the fridge. The picture shows the coldest

and warmest places inside the fridge.

(+ warm, - cold)

Meat, fish and milk should be put in the coldest part

of the cabinet.

The temperature will be affected by:

· How often the door is opened

· How much food is stored

· Position of the appliance (See chapter

Installation)

Measuring the temperature

If the temperature is measured using a standard,

single thermometer, this should be put in a glass of

water centrally placed inside the cabinet. This will

reflect the temperature inside the food products. Do

not place the thermometer hanging or lying directly

on the shelf.

Hints:

· Distribute foodstuffs to allow cold air to

circulate freely between the products.

· Do not place food products directly against the

cooling plate on the rear wall since they may

freeze in this case.

· Also never put warm products into the cabinet.

Wait until they have cooled down.

· Cover all foods properly to avoid odours and

flavours from tainting other food.

Switching off

Turn the control anti-clockwise past the click

position to "•".

Remove the power supply plug from the wall socket.

Cabinet interior

The shelves and door compartments are removable

and can easily be re-arranged.

Certain shelves must be lifted up by the rear edge to

enable them to be removed.

The lower door compartment and the glass shelf

above the vegetable drawer must not be moved.

They are required for proper air circulation inside the

cabinet.

Shelves with a raised edge should be placed with the

raised edge facing the rear wall of the cabinet, and

thus prevent food products from touching the

cooling plate.

Hanging half-shelf

The half-shelf can be moved sideways. It can be

hung under all door shelves, except the lowest one.

-- --

Electrolux 818 20 43-04/5

Hints and Tips GB

Saving energy

·Pay careful attention to where the cabinet is

placed. See the section "Installation". When

installed correctly, the cabinet will consume less

energy.

·Try to avoid keeping the door open for long

periods, or opening the door too frequently as

warm air will enter the cabinet, and cause the

compressor to switch on unnecessarily often.

·Ensure there are no obstructions preventing the

door from closing properly.

·Thaw frozen food in the fridge. This will ensure

safer defrosting of foods and reduce the work of

the refrigeration unit

·It is advisable to periodically clean the

refrigeration system at the back of the appliance

with a duster or vacuum cleaner.

·Always leave warm food to cool down to room

temperature before placing in the fridge.

·Make sure the door gasket is complete and

always clean.

Food Storage

·To obtain the best results from your appliance,

neither hot foods nor liquids which may

evaporate, should be placed in the larder

compartment.

·Avoid buying frozen food if you can not store it

straight away. The use of an insulated container is

advisable. When you arrive home place the

frozen food in the freezer immediately.

·Ensure that food placed in the freezer is dated and

labelled and used in date order to ensure that food

is consumed at its best.

Remove suspect food from you refrigerator and

clean, refer to cleaning and maintenance.

Protect the environment

·Hand over the cabinet packaging and discarded

fridges and freezers to a recycling station.

Contact your local council or Environmental

Health office for more information.

·Keep foodstuff in re-usable containers. Cut down

on disposable material as much as possible.

·When cleaning the cabinet, use a mild

washing-up detergent.

·Follow the advice in the section "Saving energy"

·The door gasket and coolant used in this

cabinet will not harm the ozone layer.

·All parts in the packaging can be recycled.

·The cabinet has been designed for easy

dismantling and subsequent recycling.

Maintenance and Cleaning GB

Removing the ventilation grille

The ventilation grille can be removed, e.g. to wash

the grille.

Make sure the door is open when removing the

ventilation grille. Unsnap the upper edge of the grille

by pulling outward/downward. Then pull the grille

straight out to completely remove it.

Cleaning

Clean the cabinet at regular intervals.

Don't use detergents, abrasive powders,

high perfumed cleaning products, wax

polishes or cleaning products

containing bleach or alcohol when

cleaning the product

Clean out the drip channel inside the fridge at

regular intervals and ensure that the drip channel is

clear at all times. If blocked carefully clear using a

piece of flexible curtain wire inserted into the drain

outlet to remove the blockage.

Electrolux 818 20 43-04/5

Disconnect the appliance from electricity supply.

Internal Cleaning

Clean the inside and accessories with warm water

and bicarbonate of soda (5ml to 0,5 litre water)

Rinse and dry thoroughly.

Regularly check the door seals and wipe clean to

ensure they are clean and free from debris.

External Cleaning

Wash the outer cabinet with warm soapy water.

Remove the ventilation grille (see the section

"Removing the ventilation grille") and vacuum-clean

under the cabinet. Once or twice a year dust the

condenser (black grille) and the compressor at the

back of the appliance, with a brush or vacuum

cleaner, as an accumulation of dust will affect the

performance of the appliance and cause excessive

electricity consumption.

When moving the cabinet, lift it by

the front edge to avoid scratching the

floor.

Defrosting the fridge

The fridge is defrosted automatically every time the

compressor stops. Frost formation can be prevented

by:

·not putting warm foodstuff inside the cabinet.

·avoiding frequently opening the door or keeping

it open too long.

·do not place foodstuffs directly against the cold

cooling plate.

To change the light bulb

The light is switched on automatically when the

door is opened. Before replacing the light bulb,

disconnect the power plug from the outlet.

Cut the packaging around the bulb socket.

Keep the packaging on to hold the bulb when setting

it into the socket. Do not touch the bulb with your

bare fingers. Halogen light bulbs are sensitive to

grease from the skin.

Use a clear halogen light bulb.

When the appliance is not in use

Disconnect the appliance from electricity supply.

Empty all foods and clean the appliance, leaving the

doors ajar to prevent unpleasant smells.

If the cabinet will be kept on, ask somebody to

check it once in a while to prevent the food inside

from spoiling in case of a power failure.

UV-blocked

Low pressure20W/12V

Electrolux 818 20 43-04/5

Something Not Working GB

Before contacting your local Service Force Centre check the following point:

Problem Possible cause / Remedy

It is too warm inside the refrigerator. Set a lower temperature.

Put food products in the right place inside the refrigerator. See

the chapter "Temperature inside the refrigerator".

Distribute the food products to allow cold air to circulate

around them.

Make sure that the door is completely closed and that the

insulating strip is complete and clean.

The temperature where the cabinet is placed is above normal

room temperature.

It is too cold inside the refrigerator. Set a warmer temperature.

Vegetables and other products that are easily frozen have been

placed on a "too cold" shelf. See the chapter "Temperature

inside the refrigerator".

There is water on the cooling plate inside

the refrigerator.

This is normal. During automatic defrosting, frost thaws on the

cooling plate.

Water is running inside the refrigerator. Clean the water drain and drain hole inside the refrigerator

using e.g. cotton swabs or a bottle cleaner brush.

Some food products could have been placed near the rear of the

appliance prevetung the water from running into the drain.

Water comes out on the floor. Place the drain hose at the back of the cabinet above the drain

bowl. See the chapter "Before using the cabinet the first time".

The compressor operates continuously. Set a warmer temperature.

Make sure that the door is completely closed and that the

insulating strip is complete and clean.

The temperature where the cabinet is placed is above normal

room temperature.

The cabinet does not operate at all.

Cooling or interior light does not

operate. No indicator lamps light.

The cabinet is not switched on.

Power does not reach the cabinet. (Try connecting another

electrical device to the power outlet.)

The fuse has blown.

The power plug is not properly connected.

Sound level in cabinet is too high. The refrigerating system will always produce some sounds. A

pulsing sound is heard when coolant is pumped inside the

cooling pipes. A ticking sound from the thermostat can be

heard when the compressor switches on and off. The sound

level varies depending on the operation of the cabinet.

If you feel the sound level is incorrect:

Make sure the pipes at the back of the cabinet not touch each

other. Carefully bend them if they do.

If the cushion spacers (between the cabinet wall and pipes)

come loose, put them back in place again.

Carefully follow the instructions in the chapter "Installing the

cabinet".

Guarantee Conditions

See Guarantee Conditions on the Registration Card.

Electrolux 818 20 43-04/5

ServiceandSpareParts

In the event of your appliance requiring service, or

if you wish to purchase spare parts please contact

your local Electrolux Service Force Centre by

telephoning:

XXXXXXXXXXX

Your call be routed the Service Force Centre

covering your post code area. The address of your

local Service Force Centre ids detailed in the

accompanying Customer Care Book.

Before calling out an engineer, please ensure you

have read the details under the heading "Something

Not Working"

When you contact the Service Centre you will need

to give the following details.They will be found

inside your appliance.

MOD (modell):.....................................................

PROD.NO (model number):..................................

SER:NO (serial number):.......................................

Purchase date............................................................

Technical specification GB

Model ERC2805

Volume Refrigerator265 l

Width 595 mm

Height 1600 mm

Depth 600 mm

Energy consumption 106 kWh/y

Energy class A+

Rated power 110 W

Installation GB

Unpacking

Unpack the cabinet and check that it is in good

condition and free of any transport damage. Notify

the dealer immediately of any damage. Hand the

packaging over for recycling. For more information,

contact your local city office or the dealer.

Do not allow children to play with the

packaging. The plastic film can cause

suffocation.

Remove the transport supports

Remove the tape and the transport supports from

·the door sides

·the shelves

Remove the transport support on the glass shelf by

pushing the support forward along the edge of the

shelf until it stops. Take hold of the rear edge of the

glass shelf and pull the shelf and transport support

forward until the shelf tilts and the transport support

can be removed. Some models are fitted with a

silencing pad under the cabinet. Do not remove this

pad.

Electrolux 818 20 43-04/5

Mains Cable

In the event of damage to the appliance's main cable,

to avoid risks only an authorised service company

recommended by the supplier or a qualified person

may adjust it.

Cleaning

Wash the inside of the cabinet using lukewarm

water, a mild washing-up detergent and a soft cloth.

Installing the cabinet

When two appliances are placed beside each other,

the distances enclosed in the plastic wrapping should

be glued between the appliances. As shown in the

illustration.

To obtain the best performance from the cabinet,

ensure :

·the cabinet is placed in a dry, cool place and

is not exposed to direct sunlight.

·the cabinet is not placed close to a source of

heat, e.g. a cooker or dishwasher.

·the cabinet is level. The cabinet should not lean

against any wall. If necessary adjust the

feet using the adjustment spanner supplied.

·there is good air circulation around the cabinet

and that the air channels below and behind

the cabinet are not blocked. The ventilation

space above the cabinet must be at least 4 cm.

The ventilation space can either be

a) directly above the cabinet, or

b) behind and above the top cupboard. In this case,

the space behind the cupboard must be at least

50 mm deep.

Cabinet is placed at a location whose ambient

temperature corresponds to the climate

classification*, for which the appliance is designed.

* See on the rating plate on the inside of the

appliance.

The following table shows which ambient

temperature is correct for each climate classification.

Climate

classification for an ambient temperature of

+10°C to +32°C

+16°C to +32°C

+18°C to +38°C

+18°C to +43°C

If the cabinet is placed in a corner and the side with

the hinges facing the wall, the distance between the

wall and the cabinet must be at least 10 mm to allow

the door to open enough so that the shelves can be

removed.

Check that the drain hose at the rear of the cabinet

discharges into the drip tray.

The power plug must be accessible after installation

of the cabinet.

50mm

a) b)

Electrolux 818 20 43-04/5

Door Reversal

1. Close the cabinet and remove the plug from the

electrical socket.

2. Remove the ventilation grille. There is a part on

the grille that can be removed. Remove and

reposition it on the other side.

3. Put the cabinet on a wooden board when it is laid

down. Later, when raising the cabinet, it will be

easier to grip under the cabinet thanks to the board.

4. On the upper part of the cabinet. Put the hinge pin

on the other side.

5. On the lower part of the cabinet.

a. Unscrew the hinge.

b. Remove the door-closing fittings from the hinge

and put the hinge pin on the other side. Then attach

the supplied door-closing fitting.

6. a. Remove the door-closing fitting from the

bottom of the door.

b. Remove the plastic plug from the corresponding

hole on the other side. Use a screwdriver to rock the

plug loose. Then secure the supplied door-closing

fitting.

c. Secure the lower hinge.

Remove any play in the door by adjusting the height

of the lower hinge with the supplied spanner. Secure

with the lock-nut.

7. Raise the cabinet and replace the ventilation grille.

8. To transfer the handle.

Unscrew the screws. Fit the handle onto the opposite

side by turning it one half circle. Press the supplied

plastic plugs into the holes to which the handle was

previously fitted.

9. Put the cabinet in position. Check that the

appliance is level. See the section "Positioning the

cabinet".

Electrical connection

Connect the cabinet to a grounded electrical outlet.

Voltage: 230 V.

Fuse: 10 A.

Refer to the rating plate on the left inside the

cabinet.

Inhaltsverzeichnis

Andere Electrolux Kühlschrank Handbücher

Electrolux

Electrolux Freezer Bedienungsanleitung

Electrolux

Electrolux ERES38820W Bedienungsanleitung

Electrolux

Electrolux U30421 Bedienungsanleitung

Electrolux

Electrolux 216802800 Bedienungsanleitung

Electrolux

Electrolux ERF3307AOW Bedienungsanleitung

Electrolux

Electrolux EI26SS30JS Bedienungsanleitung

Electrolux

Electrolux ER 1624T Bedienungsanleitung

Electrolux

Electrolux ER 2341B Installations- und Betriebshandbuch

Electrolux

Electrolux ERES31800W Bedienungsanleitung

Electrolux

Electrolux ENA34835W Bedienungsanleitung

Electrolux

Electrolux FRT21LRGW5 Betriebsanleitung

Electrolux

Electrolux ERB29033X Bedienungsanleitung

Electrolux

Electrolux RF751 Kurzanleitung

Electrolux

Electrolux ER 7549B Kurzanleitung

Electrolux

Electrolux WRS26MF5AS4 Bedienungsanleitung

Electrolux

Electrolux E23CS78EPS Bedienungsanleitung

Electrolux

Electrolux U24226 ERC3709 Bedienungsanleitung

Electrolux

Electrolux ERW23900X Bedienungsanleitung

Electrolux

Electrolux IK2805SZR Bedienungsanleitung

Electrolux

Electrolux ERD 3464 X Bedienungsanleitung

Electrolux

Electrolux 102258 Bedienungsanleitung

Electrolux

Electrolux FI23/11ND Bedienungsanleitung

Electrolux

Electrolux ERN 2372 Bedienungsanleitung

Electrolux

Electrolux EW23BC85KS Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung

Teledyne

Teledyne 6712FR and Betriebsanleitung