Electrolux SANTO 2941i Original Betriebsanleitung
SERVICE INSTRUCTION
COLD
©AEG Hausgeräte GmbH Publ.-No.
Muggenhofer Straße 135 599 51 07 03
D-90429 Nürnberg
Germany EN
Fax +49 (0)911 323 1420
TSE-N
Edition: 02.01
LONGFRESH
MODELS
SANTO 2941i
SANTO 2902i
SANTO 2932i
AEG-Refrigeration 292 5209 68
VH34-AUK 06.94
Santo 2941i longfresh E-Nr.: 621 370 121 (R12)
Santo 2902i longfresh E-Nr.: 621 371 022 (R134A)
1. General
The Santo 2941i longfresh has electronically controlled information displays and microproc-
essor controlled regulators for the refrigerator as well as for the 4-star freezer compartment.
A so-called longfresh compartment is integrated within the refrigerator of the appliance. In
addition, refrigerator and longfresh compartment are controlled via a magnetic valve.
Refrigerator compartment
longfresh compartment
4-star freezing compartment
AEG-Refrigeration 292 5209 69
VH34-AUK 06.94
Santo 2941i longfresh E-Nr.: 621 370 121 (R12)
Santo 2902i longfresh E-Nr.: 621 371 022 (R134A)
2. Operation
2.1. Refrigerator and longfresh compartment
The refrigerator can be adjusted within a temperature range of +3 to +9oC (rated tempera-
ture). In contrast, the longfresh compartment has a fixed temperature setting of 2oC +2K. In
both longfresh shelves, air humidity can be set individually from about 40 to 90%.
Control lamp for Control lamp for Operation control lamp
refrigeration fan express cooling for refrigerator
Button Express Main switch Temp.contol LCD-temp.display
refrigeration cooling switch cooling/longfresh refrigerator refrigerator
fan compartment
2.1.1.Main switch
Switching on and off of the refrigerator and longfresh compartment is only possible with a pen
or similar (childproof safety switch).
Important: Do not disconnect from mains supply as logical on and off switching of
components is via electronic module.
2.1.2.Switch for refrigeration fan
When switching on, the appliance is automatically switched to operation with refrigeration fan
(control lamp on). The running fan increases cooling capacity and decreases thermal
stratification. Due to the energy-optimised 12V-DC motor, the refrigerator uses even less
energy when the fan is activated. If not required, the refrigeration fan can be switched off with
this button.
AEG-Refrigeration 292 5209 70
VH34-AUK 06.94
Santo 2941i longfresh E-Nr.: 621 370 121 (R12)
Santo 2902i longfresh E-Nr.: 621 371 022 (R134A)
2.1.3.Express cooling
By pressing the button Express cooling, the temperature within the refrigerator is decreased
to its lowest value (+3oC). The fan is in constant operation (6 hours). After 6 hours, operation
reverts to normal. Both methods represent an extremely high cooling capacity. The longfresh
fan is running in fixed cycle operation.
2.2. Freezing compartment
The temperature for the freezing compartment can be adjusted between -14 to -28oC.
2.2.1.Main switch
As with the refrigerator, switching on and off of the freezing compartment is only possible with
a pen or similar (childproof safety switch).
Important: Do not disconnect from mains supply as logical on and off switching of
components is via electronic module.
2.2.2.Fast freeze button
- Pressing the fast freeze button activates the fast freeze function.
- Automatic reverting to normal operation after 48h, temperature limitation to -35oC!
- Manual reverting to fast freeze is possible at all times by pressing the fast freeze button
again.
Control lamp Control lamp
freezer fast freeze
LCD temp. display Temp. control Main switch Fast freeze
freezer freezer freezer switch
AEG-Refrigeration 292 5209 71
VH34-AUK 06.94
Santo 2941i longfresh E-Nr.: 621 370 121 (R12)
Santo 2902i longfresh E-Nr.: 621 371 022 (R134A)
2.3. Temperature displays
The average refrigerator and the warmest freezer compartment temperatures are indicated
on the LCD display. During and after defrosting, the refrigeration temperature display is stored
and changes only when the temperature reaches normal levels again. 4 hours after the start
of defrosting, the actual temperature is displayed again.
Display range:
Refrigerator +19 to 0oC
Freezer 0 to -39oC
If the temperature falls outside these ranges, only lines are displayed; if the refrigeration
temperature falls below 0oC, then 0oC is constantly displayed.
As this is an integrated appliance, the background illumination of the temperature displays and
all LEDs are switched off when the refrigerator door is closed.
3. Warning controls
longfresh-temp.control lamp Freezer temperature control lamp
Cancel button acoustic signal refrigerator Cancelbuttonacousticsignalfreezer
3.1. Acoustic warning
The acoustic signal sounds if:
- one of the two doors is open longer than 30s (permanent signal). The signal can be
switched off by pressing the respective cancel button. The warning will sound again after
2 mins, if one door stays open.
- one or more sensor(s) is defective (short circuit). The intermittent signal can be switched
off by pressing the cancel button, an optical fault information is displayed on the
respective LCD window (see point 10).
- the temperature in relation to the set value rises excessively too much (values see point
3.2).
The intermittent acoustic temperature warning can be switched off by pressing the
respective cancel button and will sound again as soon as the door is next opened.
AEG-Refrigeration 292 5209 72
VH34-AUK 06.94
Santo 2941i longfresh E-Nr.: 621 370 121 (R12)
Santo 2902i longfresh E-Nr.: 621 371 022 (R134A)
3.2. Optical warnings
The red LED alarm (temperature control lamp for refrigerator and freezer) flashes if
- the temperature in the longfresh compartment rises above 6oC
- the freezer temperature is
- at setting 1: warmer than -10.5oC
- at setting 2: warmer than -14.5oC
- at setting >2.75: warmer than -17.5oC
All LEDs and temperature displays are switched off when the door is closed (LCD display
without background illumination).
4. Defrosting
The refrigerator and the longfresh compartment are defrosted automatically. The freezer has
to be defrosted manually as this part is cooled statically (conventional freezer). Points 4.1 and
4.2 therefore only relate to the refrigerator and the longfresh compartment.
4.1. Normal defrosting
The longfresh compartment and the refrigerator are defrosted automatically after 12 h
compressor operation (= circa once per day).
Operation of electronic:
1. step: Pre-defrost (preparation of defrosting):
- prior to actual defrosting, the refrigerator temperatures are cooled to rated
temperature less 2K
2. step: Start of defrosting:
- thelongfreshcompartment is defrosted with a 10W-defrost heater (longfresh
compensation heater).
- the refrigerator is defrosted by self-generated heat
3. step: End of defrosting in longfresh compartment:
- when the temperature at the longfresh evaporator sensor has reached
+8oC.
4. step: End of defrosting in refrigerator:
- when the temperature at the refrigerator evaporator sensor has reached
+6oC and defrosting of longfresh compartment has been completed.
AEG-Refrigeration 292 5209 73
VH34-AUK 06.94
Santo 2941i longfresh E-Nr.: 621 370 121 (R12)
Santo 2902i longfresh E-Nr.: 621 371 022 (R134A)
Defrosting of the refrigerator cannot be completed before defrosting of the longfresh
compartment is finished as the refrigerator is always defrosted at the same time the longfresh
compartment is defrosted.
4.2. Defrosting in continuous operation
Should the appliance for any reason switch to continuous operation (rise in ambient
temperature, faults in coolant system, overloading ...), then refrigerator and longfresh
compartment are defrosted after 10 h compressor operation, to avoid insufficient cooling due
to excessive ice build-up.
5. Refrigeration technology and automatic control technology - functional principles
5.1. Freezer
The Santo 2941io longfresh is equipped with a conventional 4-star freezing compartment.
This freezing compartment operates completely independent with respect to refrigeration and
control technology. The following description therefore relates mainly to the refrigerator and
longfresh compartment.
5.2. Refrigerator and longfresh compartment
The refrigerator incorporates a back panel evaporator, the longfresh compartment is
equipped with a U-evaporator (i.e. at the back and side).
5.2.1.Magnetic valve
By means of the magnetic valve, cooling can be directed optionally to the refrigerator and the
longfresh compartment or only to the longfresh compartment. Two types of valves are fitted
in series: the monostable Danfoss-3-way valve Type 0904 or the bistable Elbi-3-way valve.
If voltage is applied to the Danfoss-3-way valve, then the longfresh compartment only is
cooled. Switch-over of the Elbi-3-way valve is by voltage impulses.
AEG-Refrigeration 292 5209 74
VH34-AUK 06.94
Santo 2941i longfresh E-Nr.: 621 370 121 (R12)
Santo 2902i longfresh E-Nr.: 621 371 022 (R134A)
5.2.2.Refrigeration technology
condenser
refrigeration evaporator
magnetic valve
compressor ` longfresh evaporator
5.2.3.Compressor control
The compressor is activated via the refrigeration fan or via the longfresh cooling fan.
Depending on the air sensor condition, the electronic activates the following functions:
a) Both cooling fans are warmer than the cut-in value:
- compressor ON
- magnetic valve without voltage, i.e. refrigerator and longfresh compartment are
cooling
b) The refrigeration fan is warmer than the cut-in value, the longfresh air sensor is between
ON- and OFF value:
- compressor ON
- magnetic valve without voltage, i.e. refrigerator and longfresh compartment are
cooling
- longfresh fan cycles, i.e. cooling performance in longfresh compartment is
reduced.
AEG-Refrigeration 292 5209 75
VH34-AUK 06.94
Santo 2941i longfresh E-Nr.: 621 370 121 (R12)
Santo 2902i longfresh E-Nr.: 621 371 022 (R134A)
c) The refrigerator fan is cooler than the cut-in value, the longfresh fan is warmer than the cut-
in value:
- compressor ON
- voltage applied to the magnetic valve, i.e. only the longfresh compartment is being
cooled.
d) The refrigeration sensor is warmer than the cut-in value, the longfresh sensor is colder than
final rated value:
- compressor ON, i.e. no compartment is cooling until temperature on long-fresh air
sensor reaches cut-off value +0.5K in longfresh compartment.
It is possible that the longfresh compensation heating is switched on.
Only then:
- compressor ON
- magnetic valve without voltage, i.e. refrigerator and long-fresh compartment are cooled.
- longfresh fan cycles.
Note:
The refrigerator has first priority with regard to refrigeration technology and second priority
with regard to automatic control technology. The longfresh compartment on the other hand
has second priority with regard to refrigeration technology as the coolant flows from the
Rollbond-evaporator to the U-evaporator. With respect to automatic control technology
however, the longfresh compartment has top priority. If the thermal stress within the
refrigerator is already fairly high, then the cooling capacity of the longfresh compartment is
technologically reduced. This is however almost eliminated due to the cycling of the longfresh
fan or even by activating of the longfresh compensation heating (see also point 5.2.4).
AEG-Refrigeration 292 5209 76
VH34-AUK 06.94
Santo 2941i longfresh E-Nr.: 621 370 121 (R12)
Santo 2902i longfresh E-Nr.: 621 371 022 (R134A)
5.2.4.Warm refrigerator temperature (fan regulation):
If the actual temperature of the refrigerator (= current temperature on refrigerator air sensor)
is higher by 5K than the cut-in value, then depending on the actual temperature of the
longfresh compartment (=current temperature on longfresh air sensor) the following functions
are progressively activated:
a) The actual temperature in the longfresh compartment is warmer by 0.5K than the cut-in
value.
- the refrigeration fan is switched parallel to the compressor.
b) The actual temperature of the longfresh compartment is colder than initial rated value.
- the refrigeration fan is switched parallel to the compressor
- the longfresh fan cycles
c) The actual temperature in the longfresh compartment is colder by 0.5K than the cut-off
value.
- the refrigeration fan is switched parallel to the compressor.
- the longfresh fan cycles
- voltage is applied to the longfresh compensation heating.
If the relevant actual temperature within the longfresh compartment is exceeded, then the
output of the respective function decreases. If the actual temperature within the refrigerator
reaches cut-in value +2K, the function ceases altogether.
Dieses Handbuch passt für folgende Modelle
2
Andere Electrolux Kühlschrank Handbücher
Electrolux
Electrolux ER 7659B Kurzanleitung
Electrolux
Electrolux ER8509BX Bedienungsanleitung
Electrolux
Electrolux ENB3669(S) Bedienungsanleitung
Electrolux
Electrolux ERF3310AOW Bedienungsanleitung
Electrolux
Electrolux ER 5763 C Bedienungsanleitung
Electrolux
Electrolux U24226 ERC3709 Bedienungsanleitung
Electrolux
Electrolux Juno JRG 90181 Bedienungsanleitung
Electrolux
Electrolux ER2440D Bedienungsanleitung
Electrolux
Electrolux FROST REFRIGERATORS with ERF2021 electronic Bedienungsanleitung
Electrolux
Electrolux EQE5807A Bedienungsanleitung
Electrolux
Electrolux ERT16002W8 Bedienungsanleitung
Electrolux
Electrolux EI27BS16JB1 Bedienungsanleitung
Electrolux
Electrolux ENN2743AOV Bedienungsanleitung
Electrolux
Electrolux ENN2754AOW Bedienungsanleitung
Electrolux
Electrolux ERD2304W Bedienungsanleitung
Electrolux
Electrolux EQE5607 Bedienungsanleitung
Electrolux
Electrolux EI24RD65HS - 6.0 cu. Ft. Double Drawer... Montageanleitung
Electrolux
Electrolux ESE6107 Bedienungsanleitung
Electrolux
Electrolux ER2944B Kurzanleitung
Electrolux
Electrolux EQE5660A-B Bedienungsanleitung
Beliebte Kühlschrank Handbücher anderer Marken
Bonnet Neve
Bonnet Neve SKYVIEW PLUS Bedienungsanleitung
Zanussi Electrolux
Zanussi Electrolux ZERB 8441 Bedienungsanleitung
Sharp
Sharp SJ-BA31IEXW2-EU Bedienungsanleitung
CORBERO
CORBERO CC2300MCW Bedienungsanleitung
KitchenAid
KitchenAid 2205264 Bedienungsanleitung
Stengel
Stengel KU 1101 A++ Bedienungsanleitung
