Electronics Diversified SMART Bedienungsanleitung

SMART System

User Manual

Electronics Diversified, Inc..

Revision2.0,January2003

SMART System

TABLE OF CONTENTS

OVERVIEW

Master Station buttons.........

Connections.........................

Power Consumption..............

PRESETS

Overview.............................

Activation............................

Editing................................

Global Presets.....................

XGlobal Presets...................

STATIONS

Overview.............................

SlaveLCD............................

10 Button.............................

2 Button...............................

Digital Slider........................

Remote Device Interface.......

IR Remote Station................

PATCH

Overview.............................

Patch Screen.......................

Non-Dimming.......................

COMBINES

Overview.............................

Activation............................

OverlappingCombines..........

Combine Setup....................

How: Preset vs. Zone............

XGlobals..............................

Patch Page switching............

LOCKOUTS

Overview.............................

Setup Lockout Actions.........

Assign Lockout Actions.........

Lockout Override..................

Example1:0ne preset lock.....

Example2:Left-side preset..

lock, right-side preset unlock

TIMECLOCK

Overview............................

Setup Clock........................

Setup Events......................

Turn On/Off Events..............

CONFIG SETTINGS

Remote Edit........................

Password............................

Master Room Assignment....

Activate Patch....................

Blackout.............................

PASSWORD

Changing Passwords...........

CLEARINGTHE SYSTEM

Clearing and Setup............

STATIONWIRING

Cabling...............................

HARDWARE PIECES

Overview............................

Removal of faceplate...........

OVERVIEW

SMART System

MASTER STATION BUTTONS

MappedButtons:

Illuminating Buttons mapped to the display.Any

button press results in the execution of the feature

mappedtothe button.

Up/DownButtons:

Allowsusertocontrolhighlightedfeaturedisplayed

by the Mapped Buttons. Mapped buttons are ued to

adjust levels, set time or curse through character

fieldsdependingonthiersetfunction.Character

fields will go SPACE, ! ,” , #, $, %, &, ’, (, ), *, +, ,,

-, ., 0 through 9, :, ;, <, =, >, ?, @, A through Z, [,

], ^, _, ’, a through z.

Menu Button:

Gives access between the preset menu page and

a menu of 8 other selections: ClearSys, Stations,

DimPatch, Combines, Lockouts,Timers, Pass-

word,andConfig.

EditButton:

When in the Preset activation page this button will

allow the user to toggle between the 3 sets of

preset pages.Within one of the Menu pages, it will

allow the user to cycle through pages of one of the

other topics:ClearSys, Stations,Dim Patch,

Combines, Lockouts,Timers, Password, and

Configurations.

POWER CONSUMPTION

OperatingVoltage:9-24V

For small (1-8 Stations) systems 15VDC is

sufficient. Larger systems (9-16 Stations) must

use a 24VDC Power Supply.

MasterStation

LCDSlave

Station

2/10/IR Stations

Slider Stations

RDI

110mA

50mA

60mA

100mA*

100mA

Current(12VDC)

CONNECTORS

SMART System

Combines:

PIN1-8:CombineInputs

PIN10: Ground

DMXOutput:

PIN1: Ground

PIN2:Data-

PIN 3: Data+

Power/Serial Connection:

PIN1: Ground

PIN 2: Serial +

PIN 3: Serial -

PIN 4:+9 to 24VDC

OVERVIEW

*Ratingbasedupon10channel

slider.Lesserchannel models will

have a smaller maximum value.

The SMART System has 117 presets

total. Each of the 8 rooms have 13 user

editable presets, plus 13 XGlobal

Presets.The user has access to 7

presets at one time from the Preset

Menu.To access the other six presets,

press the More button.The 13th preset,

labeled OFF will be accessable in both

screens.

To Edit Presets,

Press Edit.

Select Room:

Press Rm.

Use Up/Down buttons to

select room.

Select Preset:

Press Pr.

Use Up/Down buttons to

select preset.

Select Zone to be edited:

Press Zn.

Use Up/Down buttons to

select zone.

Adjust Level:

Press Lv.

Use Up/Down buttons to

adjust level or use

Full,Off,+10 (increase by

10%) or -10% (decrease

by 10%).

SMART System

PRESETS

OVERVIEW

EDITING LEVELS/TIMES

PR1

PR2

PR3

Off

PR4

PR5

PR6

PR4

PR5

PR6

PR1

PR2

PR3

Off

Rm1

Pr1

Zn1

Lv100%

Full

+10

-10

Off

Rm1

Pr1

Zn1

Lv100%

Full

+10

-10

Off

Rm1

Pr1

Zn1

Lv100%

Full

+10

-10

Off

Rm1

Pr1

Zn1

Lv100%

Full

+10

-10

Off

SMART System

PRESETS

Set Fade Time:

Press Edit.

SelectTm.

Use Up/Down buttons to

increment by seconds,

Min-/Min+ to increment

by minutes and -10/+10

to increment by 10

second intervals.

Name Preset:

Press Edit.

Select Name.

Use Up/Down buttons to

select character. Character

fields will go SPACE, ! ,”

, #, $, %, &, ’, (, ), *, +, ,, -,

., 0 through 9, :, ;, <, =, >,

?, @, A through Z, [, ], ^, _,

’, a through z. Use !, 0, a,

and Ato quickly jump to

characters.

Return to Preset Menu:

Press Menu.

Note: All changes are being

recorded while the user is editing.

+Min

+10

-10

-Min

Rm1

Pr1

Tm00:05

Globalno

Rm1

Pr1

Name PR1

Lockout None

SMART System

PRESETS GLOBAL PRESETS

Normal presets allow levels to be adjusted

within a room and that room only.Global

presets allow the user to adjust different

zones in different rooms. Users can inhibit or

“skip” zones so that they will not be affected

by the preset. A global preset is most useful in

cases where lights in distant rooms need to be

turnedonsimultaneouslyorwhereaspecial

preset is needed for system wide control.

From Preset Menu,

To create a global,

press Edit.

Select Room:

Press Rm.

Use Up/Down buttons to

select room for the preset.

Select Preset:

Press Pr.

Use Up/Down buttons to

select preset.

Activate Global Function for this

Preset:Press Edit.

Press Global.

Press Up button. The display

should change from Global no to

Global yes.

Select Room:

Press Edit twice. The display

should show Global below Rm

and Pr in the left hand part of the

screen.

Press Edit again.*GLOBAL*

should display at the top.

Press Rm.

Use Up/Down buttons to select

room.

PR4

PR5

PR6

PR1

PR2

PR3

Off

Rm1

Pr1

Zn1

Lv100%

Full

+10

-10

Off

Rm1

Pr1

Zn1

Lv100%

Full

+10

-10

Off

Full

+10

-10

Off

Rm1

Pr1

*Global*

Full

+10

-10

Off

Rm1 *GLOBAL*

Zn1 *Rm1*

Lv100% *Pr1*

Skip yes

+Min

+10

-10

-Min

Rm1

Pr1

Tm00:05

Globalno

SMART System

PRESETS

Select Zone to be edited:

Press Zn.

Use Up/Down buttons to

select zone.

Adjust Level:

Press Lv.

Use Up/Down buttons to

adjust level or use Full,Off,+10

(increase by 10%) or -10%

(decrement by 10%).

Unskip Zone:

Press Skip.

Press Down button. Skip yes

should change to Skip no. A

zone that is left on Skip yes will

not be affected by this preset.

Set FadeTime:

Press Edit.

SelectTm.

Use Up/Down buttons incre-

ment by seconds, Min-/Min+

increment by minutes and -10/

+10 to increment by 10 second

intervals.

Name Preset:

Press Edit.

Select Name.

Use Up/Down buttons to select

character. Character fields will go

SPACE, ! ,” , #, $, %, &, ’, (, ), *,

+, ,, -, ., 0 through 9, :, ;, <, =,

>, ?, @, A through Z, [, ], ^, _,

’, a through z. Use !, 0, a,

and Ato quickly jump to

characters.

Return to Preset Menu:

Press Menu.

+Min

+10

-10

-Min

Rm1

Pr1

Tm00:05

Globalno

Full

+10

-10

Off

Rm1 *GLOBAL*

Zn1 *Rm1*

Lv100% *Pr1*

Skip yes

Full

+10

-10

Off

Rm1 *GLOBAL*

Zn1 *Rm1*

Lv100% *Pr1*

Skip yes

Full

+10

-10

Off

Rm1 *GLOBAL*

Zn1 *Rm1*

Lv100% *Pr1*

Skip yes

Rm1

Pr1

Name PR1

Lockout None

SMART System

PRESETS

XGLOBAL PRESETS

13 XGlobal Presets can replace presets in

combined rooms.The presets are not associated

with any room, thus dsignated on the master

station as X. Because they are a global preset,

they will affect only those zones in rooms that

are not“skipped”.They can only be activated with

a combine function and only be activated from

stationswithinthecombinedroom.

To assign an XGlobal Preset to a Combine

function, turn to page 25.

From Preset Menu,

To create an XGlobal,

press Edit.

Select Room:

Press Rm.

Use Up button to select room

X.The display should show

Global below Rm and Pr in the

left hand part of the screen

Press Edit.

Select Roomto Edit:

Press Edit again.*GLOBAL*

should display at the top.

Press Rm.

Use Up/Down buttons to select

room.

Follow the directions on page 7 for

editing Global presets.

Full

+10

-10

Off

RmX

Pr1

*Global*

PR4

PR5

PR6

PR1

PR2

PR3

Off

Rm1

Pr1

Zn1

Lv100%

Full

+10

-10

Off

Full

+10

-10

Off

Rm1 *GLOBAL*

Zn1 *RmX*

Lv0% *Pr1*

Skip yes

SMART System

STATIONS

OVERVIEW

The SMART System can handle up to 16 stations:

6 types of stations are available on the SMART System: LCD

Slave, 10 Button, 2 Button, Digital Slider, IR Remote, and Remote

DeviceInterface.

Stations can be spread out over 1000 feet of Alpha 1133.

The SMART System can only address one station and cannot

allow“mirroring”of stations.

The Master Station itself can be used as a station and is non

addressable.

To read how to select the room the Master station will operate

turn to page 31.

SLAVE LCD STATION

MappedButtons:

Illuminating Buttons mapped to the display.

Any button press results in the execution of

the feature mapped to the button.

Up/Down Buttons:

Allowsusertocontrolhighlightedfeature

displayed by the Mapped Buttons. Used to

adjust levels or set time.

Menu Button:

Returnstothepreset menu page.

EditButton:

Prompts for the next page within the Preset

editpages



Inhaltsverzeichnis

Andere Electronics Diversified Beleuchtungsausrüstung Handbücher

Electronics Diversified

Electronics Diversified T-12 Bedienungsanleitung

Electronics Diversified

Electronics Diversified BIJOU Ver. 2.11 Bedienungsanleitung

Electronics Diversified

Electronics Diversified SCRimmer STIK Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung