Elenberg MC-4080 Bedienungsanleitung
USER MANUAL
DVD MINI
Model: MC-4080
2
Features ............................................................................................. 3
For your Attention ............................................................................... 4
Accessories ....................................................................................... 5
Panel ................................................................................................. 6
Connection ........................................................................................ 7
System Setup ..................................................................................... 9
Play ................................................................................................ 12
Troubleshooting ............................................................................... 18
Specification .................................................................................... 19
Contens
3
Thank you for purchasing our product. Please go through this manual
carefully before connection and operation. Please keep this manual for
future reference.
DVD player is a new generation home player which can produce high
quality video and audio. Its performance is much better than that of any
previous home video playing equipment. As the best signal source of
home theatre system, It will give you the uppermost enjoyment!
•Built in Dolby AC-3 DTS, LPCM, MPEG etc. digital audio output
•Hi-fi, 96kHz/24bit audio digital processor.
•Software intelligent upgrade * High-resolution picture, support the future
video equipment
•Professional digital Karaoke function
•Optical, Coaxial digital audio output
•Super compatible with DVD/VCD/CD/MP3/KODAK PICTURE CD
•Latest the forth generation servo, decoding single-wafer technology,
reliable stability and super error correction.
•Full function remote controller
•AM/FM stereo radio tuner
Features
4
IMPORTANT NOTES
•Please read through the manual carefully before connection and operation.
•Do not open the cover or touch any internal components for non-
professional
•Turn off the power when the unit is not being used. (Unplug the power
cord if the unit is not used for a long time).
•Don't expose this unit to direct sunlight. Keep away the heating sources
or equipments
•Don't expose this unit to the rain or moisture.
•Place the unit on a horizontal level. Keep the unit ventilated. Don't block
the heat hole.
Overheat may cause malfunction.
•Clean the cabinet with soft cloth. Detergent or alcohol is forbidden.
•This book is only a guide for user`s operation, not a criterion for
configuration.
The lightning flash is intended to alert the user to the presence
of dangerous voltage within the product's enclosure, and
touching the inner parts may result in a risk of electric shock to
persons.
The exclamatory mark is intended to alert the user to the
presence of important operating instructions.
To reduce the risk of electric shock or fire, do not open the
cover. Refer servicing to qualified service personnel.
This mark indicates this unit belongs to class 1 laser product.
The laser beam may produce radiation harm to the directly
touching human body.
For Your Attention
5
REMOTE CONTROLLER OPERATION
•Insert the batteries into the cell box.The remote control points at remote
sensor within 8 metres and within 30 degree at left or right side.
•Take the battery out of the controller if it is not used for a long time
THIS UNIT CAN PLAY THE FOLLOWING TYPES OF DISCS
Accessories
User manual
Remote
controller
A/V cable
AM antenna
FM
antenna
Speaker connect cable
ACCESSORIES
Disctypes Symbol Contents
DVD Audio + Video
AC–3 Dolby Digital Audio
SVCD Audio
ÌÐ3 Audio
Video–CD (VCD) Audio + Video
CD–DA Audio
Kodak Picture CD Electronic Photo
6
Replace the same fuse after pulling out the power pulg
Panel
FRONT PANEL:
w
1. POWER
2. AM/FM/V-MODE
3. AUTO/A-MODE
4. MEMORY/AUDIO
5. MO/ST/SUBTITLE
6. RADIO/SKIP
7. TUNING/SEARCH
8. OPEN/CLOSE
9. PLAY/PAUSE
10. STOP
11. SOURCE SELECT
12.MICROPHONE
13. MIC VOL
14. ECHO
15. VOLUME
REAR PANEL:
1. VIDEO
2. S-VIDEO
3. L-CHANLE
4. R-CHANLE
5. COAXIAL OUT
6. OPTICAL OUT
7. COMPONENT V/Pr, U/Pb, Y
8. VGA
9. AM/FM ANTENNA
10. LINE1, 2 INPUT
11. FUSE
12.SCART
NOTES NO VGA terminad for some types of machine
7
Component
input
VGA Input SCART Input
Component video
output
Video and
S-Video
VGA Output SCART Output
Connection
VIDEO SYSTEM CONNECTION
The following video output available for this unit.
COMPOSITE VIDEO
Use the AV cable (yellow terminal) to connect
composite video output of this unit to the TV/monitor
video input
S-VIDEO
Use the S-video cable to connect the s-video output
of this unit to the TV/monitor S-video input
COMPONENT VIDEO (YUV)
Use 3 -core AV cable to connect the component
output terminals of this unit to the corresponding
TV/monitor input
VGA
Use a VGA cable to connect the VGA output to the
TV/monitor VGA input terminal.
SCART
Use a 21_pin SCART cable to connect the SCART
output to the TV/monitor SCART input terminal.
NOTES:
•Which connection depends on the TV/monitor
input terminal.
•Don't use the all connections at one time,
otherwise the picture will be affected.
•Only the physical connection conforms to the
video setting can produce the normal picture
(reference to the Video Setup in System
Setup).
8
Connection
2CH Audio Intput
Digital Audio Input
2CH Audio Output
Optic/ Coaxial Output
AUDIO CONNECTION SYSTEM
Two types of audio output systems: analog audio and
digital audio. Analog audio includes 2-channel stereo
. Digital audio includes coaxial output. The digital audio
output is better than the analog.
STEREO AUDIO
Use a pair of AV cable (red for right /white for left) to
connect the stereo audio output of this unit to the TV
or a stereo input of power amplifier.
COAXIAL DIGITAL AUDIO
Use the special coaxial cable to connect the coaxial
output of this unit to the coaxial input of power
amplifier.
OPTICAL DIGITAL AUDIO (OPTION)
Use the special coaxial cable to connect the optical
audio output of this unit to the optical input of power
amplifier.
NOTES:
•The physical connection should accord with audio
output setup of this unit. Please refer to Audio
Setup in System Setup.
9
System Setup
MENU OPERATION:
Press SETUP key, screen show setup page. In setup mode, press SETUP
key again to quit the setup page. Press direction key to the desired item,
press ENTER to confirm.
(1) Some setup items are concerning the present modes. The items in gray
can't be set up.
(2) The setup is memorized and kept after power off.
GENERAL SETUP PAGE:
• TV Display
Normal/PS: When the unit connects to the normal TV set, the wide-
screen image shows on the full screen, but some part is cut off.
Normal/LB: When the unit connects to the normal TV set, the wide-
screen image shows and black bars appear on the top and bottom of
screen.
Wide-screen: Use this item when the unit is connected to the wide-
screen TV set.
• ANGLE MARK
It will show the ANGLE mark when playing DVD disc with multi-angle view
if selecting ON
• OSD LANG
Select on-screen display language
• SPDIF OUTPUT
SPDIF OFF: no digital signal out (optical or coaxial output off ), only
analog audio output.
SPDIF/RAW: digital signal output in the original format recorded in the
disc.
SPDIF/PCM: digital signal output in the decoded PCM form.
• CAPTIONS
This function doesn't work when the disc without caption. If the caption is
OFF, press SUBTITLE key on the remote controller to make caption on.
The default setup is CAPTION ON.
• SCREEN SAVER
If the SCREEN SAVER is set ON and the unit is switched on without a disc
playing for several minutes, a moving picture appears on the screen, and
the unit will go to standby mode after 20 minutes. You can press STANDBY
key on the remote controller to wake it up.
10
System Setup
SPEAKER SETUP:
• DOWNMIX
LT/RT: The audio out is Left and Right channels format even if the original
sound is 5.1CH format.
STEREO: The audio out format is stereo even if the original sound is
5.1CH format.
DOLBY DIGITAL SETUP:
• Dual mono
Stereo: set audio output to the stereo output
L-mono:set audio output to the mono -left channel
R-mono:set audio output to the mono-right channel
Mix-mono:set audio output to the Mix mono channel
• DYNAMIC
If watching large dynamic scope movie program at night, to select this
mode you can reduce the volume to a very low level, at the same time, to
keep the fine details sounds. In this case, this doesn't disturb the family
and keep the quality sounds.
VIDEO SETUP PAGE:
• COMPONENT V IDE
OFF: set video output to the composite
YUV: set video output in analog component video format when connecting
to Y/U/V terminals
P-YUV: set progressive YUV signals. Connection same as YUV
RGB: set video output in Red/Green/Blue format when connecting to
SCART terminals
P-RGB: progressive RGB signals. Connection same as RGB
VGA: set to this item when connecting to VGA terminals.
• Notes:
If the video setting differs with the physical connection, the TV set
may be without picture. In case of no picture, you can RESET the
machine, then keep pressing key [V_MODE] until the picture is OK
again. For the 2CH player, the [V-MODE]has no function.
The machine without VGA or SCART has no progressive out. The P-
YUV and P-RGB should not be selected.
• QUALITY:
You can set the sharpness brightness, contrast, etc. according to your
preference.
Inhaltsverzeichnis
Sprachen:
Andere Elenberg DVD-Player Handbücher
Elenberg
Elenberg DVDP-2402 Bedienungsanleitung
Elenberg
Elenberg DVDP-2410 Bedienungsanleitung
Elenberg
Elenberg DVDP-2420 Bedienungsanleitung
Elenberg
Elenberg DVDP-2448 Bedienungsanleitung
Elenberg
Elenberg DVDP-2417 Bedienungsanleitung
Elenberg
Elenberg DVDP-2404 Bedienungsanleitung
Elenberg
Elenberg DVDP-2445 Bedienungsanleitung
Elenberg
Elenberg DVDP-2415 Bedienungsanleitung
