Elenco Electronics XR-38 Bedienungsanleitung

Operating

Instructions

ELENCO®PRECISION

DC Regulated

Power Supply

Model R-38

Read these instructions before operating this unit.

Elenco®Electronics, Inc.

150 Carpenter Avenue

Wheeling, IL 60090

(847) 541-3800

Web site: www.elenco.com

e-mail: elenco@elenco.com

TWO YEAR WARRANTY

All Elenco®models are guaranteed for two full years on all

parts and service. For the first 3 months, your power supply

is covered at absolutely no charge. For the remaining 21

months, a nominal service charge is required to cover

shipping and handling.

When returning merchandise for repair, please include

proof of purchase, a brief letter of explanation of

problem, and sufficient packing material. Before

returning any merchandise please call our service

department at (847) 541-3800 to obtain a return

authorization number (RMA).

All manuals and user guides at all-guides.com

all-guides.com

INTRODUCTION

The Model XR-38 has a regulated output of 13.8 volts @ 3A and

capable of handing 5A surges up to 30 minutes. The XR-38 is

designed to power automotive equipment such as CB radios,

stereo systems, mobile two-way radios, and vehicular alarm

systems when removed from the vehicle.

OPERATING PROCEDURE

Check the voltage rating of the equipment to be powered.

Care must be taken not to exceed this rating.

2. Turn the power supply FF.

3. Plug the line cord into a 120V, 60Hz AC outlet.

4. With the power supply turned FF, connect the load to the

output.

5. Turn the power supply N.

MAINTENANCE

Fuse replacement

1. Turn power switch off, remove any load on outputs and unplug

the line cord from AC line.

2. Unscrew the fuse holder cap and remove the fuse. Install a new

2A 250V fuse and reattach fuse holder cap.

3. Plug line cord back into 120VAC source and turn the power

switch N. Check the output for correct voltage.

Thermal

A thermal device inside the transformer will open the primary side

if the internal temperature gets too hot. There should be no output

voltage and the illuminated switch will not light. Follow the steps

below if thermal protection activates.

1. Turn the power switch off and allow unit to cool down. This may

take up to 30 minutes.

2. After the unit cools down, turn the power switch to N. Check

that the switch lights and the output voltage is 13.8V. The unit is

now ready for operation again.

Specifications

Input 120VAC, 60Hz

utput 13.8VDC @ 3A, 5A surge

Load Regulation Less than 5%

Ripple Less than 10mV rms

utput Protection Thermal and short

Input Protection 2A, 250V fuse

Size 4 5/16” (H) x 6” (W) x 8 3/16”(L)

Weight 5 lbs., 8 oz.

IMPORTANT SAFETY INSTRUCTIONS

Save these instructions. This manual contains important

safety and operating instructions.

The XR-38 is thermal, short and fuse protected against server

overloads or shorting of the output terminals. Refer to the

Maintenance section for fuse or thermal protection

information.

3. Service repair should be performed by qualified personnel or

returned to the factory when service or repair is required.

Incorrect reassembly may result in a risk of electrical shock or

fire.

4. Do not expose the power supply to rain or snow. Use only

indoors with normal temperature and humidity.

All manuals and user guides at all-guides.com

Andere Elenco Electronics Stromversorgung Handbücher

Elenco Electronics

Elenco Electronics XP-625 Bedienungsanleitung

Elenco Electronics

Elenco Electronics XP-15K Benutzerhandbuch

Elenco Electronics

Elenco Electronics XP-800 Bedienungsanleitung

Elenco Electronics

Elenco Electronics K-11 Benutzerhandbuch

Elenco Electronics

Elenco Electronics XP-770 Bedienungsanleitung

Elenco Electronics

Elenco Electronics STPS-1 Bedienungsanleitung

Elenco Electronics

Elenco Electronics XP-603 Bedienungsanleitung

Elenco Electronics

Elenco Electronics XP-605 Bedienungsanleitung

Elenco Electronics

Elenco Electronics XR-38 Bedienungsanleitung

Elenco Electronics

Elenco Electronics XP-720 Bedienungsanleitung

Elenco Electronics

Elenco Electronics XP-85 Bedienungsanleitung

Elenco Electronics

Elenco Electronics XP-100 Bedienungsanleitung

Elenco Electronics

Elenco Electronics XP-650 Bedienungsanleitung

Elenco Electronics

Elenco Electronics XP-770 Bedienungsanleitung

Elenco Electronics

Elenco Electronics XR-35 Bedienungsanleitung

Elenco Electronics

Elenco Electronics XP-4 Bedienungsanleitung

Elenco Electronics

Elenco Electronics XP-15 Bedienungsanleitung

Elenco Electronics

Elenco Electronics XP-620K Benutzerhandbuch

Elenco Electronics

Elenco Electronics XP-605 Bedienungsanleitung

Elenco Electronics

Elenco Electronics XP-581 Bedienungsanleitung

Elenco Electronics

Elenco Electronics XP-720K Bedienungsanleitung

Elenco Electronics

Elenco Electronics XP-15 Benutzerhandbuch

Elenco Electronics

Elenco Electronics XP-660 Bedienungsanleitung

Elenco Electronics

Elenco Electronics XP-620 Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung