Elexa DOME DMWV1 Bedienungsanleitung
Always Connected. Always Covered.
Water Main Shut-O
User Manual
DMWV1
Water Main Shut-O Advanced User Manual
Preface
Page 2
As this is the full User Manual, a working knowledge of Z-Wave automation
terminology and concepts will be assumed. If you are a basic user, please visit
www.domeha.com for instructions. This manual will provide in-depth technical
information about the Water Main Shut-Off, especially in regards to its compli-
ance to the Z-Wave standard (such as compatible Command Classes, Associa-
tion Group capabilities, special features, and other information) that will help
you maximize the utility of this product in your system.
Preface
Page 3
Water Main Shut-O Advanced User Manual
Table of Contents
Table of Contents
Preface................................................................................................................................. 2
Description & Features..................................................................................................... 4
Specifications..................................................................................................................... 5
Physical Characteristics ................................................................................................... 6
Inclusion & Exclusion........................................................................................................ 7
Factory Reset & Misc. Functions..................................................................................... 8
Physical Installation.......................................................................................................... 9
LED & Button Behavior................................................................................................... 12
Compatible Command Classes..................................................................................... 13
Troubleshooting.............................................................................................................. 15
Warranty & Support ........................................................................................................ 16
Water Main Shut-O Advanced User Manual
Description & Features
Page 4
The Dome Water Main Shut-Off is a Z-Wave Plus Certified device that installs
over any standard 1/2” to 1-1/2” ball valve, and opens or closes the valve
when given a signal. The Water Main Shut-Off consists of three main parts -
the “MOTOR ASSEMBLY,” the “MOUNTING BRACKET,” and the “CONTROL ARM.”
The MOUNTING BRACKET is clamped onto the pipe with HOSE CLAMPS and the
CONTROL ARM secures around the VALVE HANDLE to control the valve, while
the MOTOR ASSEMBLY connects to your home automation system and ties ev-
erything together.
Key Features:
» Open or close any valve remotely
» Single-tool installation
» Install over existing valve - no need for a plumber!
» Use with 1/2” to 1 1/2” size 1/4-turn flat handle brass ball valves
» Z-Wave Plus Certified
» Up to 150’ range
» Pair with Flood Sensors to automatically shut off your water when there is
a leak anywhere in your home.
SolidWorks Student Edition.
For Academic Use Only.
Description & Features
Page 5
Water Main Shut-O Advanced User Manual
Specications
Package Contents:
» User Manual
» Water Main Shut-Off
» Power Supply
Technical Specications
Radio protocol Z-Wave(500 series)
Power supply 12VDC
Power Consumption 0.13W
Working current 35mA
Operating temperature 32 - 112 °F
Radio frequency 908.4 MHz US
Range Up to 150’ depending on environment
Dimensions (L x W x H) 2.5” x 3.5” x 6”
Table 1 - Technical Specications
Specications
Water Main Shut-O Advanced User Manual
Physical Characteristics
Page 6
The names used in Figures 1 & 2 will be used throughout this manual. Please
refer to this page as needed.
SHUT-OFF NUT & BOLT
MOTOR CLUTCH
Figure 2 - Underside Detail of the Water Main Shut-O
SolidWorks Student Edition.
For Academic Use Only.
Open/Close
Button
Control Arm
Mounting Bracket
Motor Assembly
LED Indicator
Figure 1 - Main Parts of the Water Main Shut-O
Physical Characteristics
Page 7
Water Main Shut-O Advanced User Manual
Inclusion & Exclusion
Inclusion
1. For proper inclusion, bring the Water Main Shut-Off to the final location
where it will be used. *
2. Follow the instructions for your Z-Wave controller to enter inclusion mode.
3. Make sure the Water Main Shut-Off is powered on, and when prompted by
your controller, press the “open/close” button quickly 3 times in a row. The LED
will stop blinking and stay on continuously upon successful inclusion.
Exclusion
1. Follow the instructions for your Z-Wave certified Controller to enter exclusion
mode.
2. When prompted, press the “open/close” button on the Shut-Off quickly 3
times in a row.
CAUTION
Upon inclusion, the motor will engage and start turning automatically. To avoid serious injury, keep your
fingers and hands clear of the CONTROL ARM and its path, only gripping the unit firmly by either the
MOUNTING BRACKET or the top of the MOTOR ASSEMBLY
*For non Z-Wave Plus networks, please consult the owner’s manual for your primary controller to determine the best method and location for
adding the Water Main Shut-O to your Z-Wave network.
Inclusion & Exclusion
Water Main Shut-O Advanced User Manual
Factory Reset & Misc. Functions
Page 8
Resetting the Water Main Shut-Off
Press and hold the open/close button for at least 10 seconds then release. The
Shut-Off’s memory will be erased to factory settings. A flashing light indicates
a successful factory reset. Beware that resetting your device will disconnect it
from your system. Only do this if the controller is missing or otherwise unreach-
able!
Emergency Operation
The Water Main Shut-Off can be operated manually in the event of a power out-
age, loss of communication with your Z-Wave Hub, or some other emergency.
Follow these instructions to manually operate the Shut-Off:
1. Unplug the power from your device.
2. Locate the MOTOR CLUTCH on the underside of your device (Fig 3,) and pull
it outward by the keychain ring. The CONTROL ARM will disengage from the
motor and move freely.
MOTOR CLUTCH
Figure 3 - Finding the MOTOR CLUTCH
Factory Reset & Misc. Functions
Page 9
Water Main Shut-O Advanced User Manual
Physical Installation
Review the Pre-Installation Checklist below to make sure the Water Main Shut-Off
can be used for your application. The device should already be included in your
Z-Wave system before continuing further.
Pre-Installation Checklist
9The Water Main Shut-Off can be installed on any 1/2” to 1-1/2” brass ball
valve
9Make sure the VALVE HANDLE is comfortably usable by hand prior to
installation
9The valve should be 5” away from any walls or other obstructions (Figure
3)
9Make sure the OPEN/CLOSE BUTTON is accessible in the final position
9Make sure there is a working power outlet (that will always be powered on)
reachable with a 10’ cord from the valve
9Finally, confirm that you are still within range of your Z-Wave controller.
5”+
5”
HOSE CLAMPS
VALVE HANDLE
Figure 4 - Water Main Shut-O Installation
Physical Installation
Water Main Shut-O Advanced User Manual
Physical Installation
Page 10
Installation Process
1. Make sure the installed valve is comfortably usable by hand before continuing
further.
2. Open both HOSE CLAMPS completely so their ends are free, insert both of
them into the slots in the MOUNTING BRACKET, and let them hang loosely.
3. Remove the protective film covering the screws on the CONTROL ARM and
spread the CONTROL ARM.
4. Make sure both the valve and the Water Main Shut-Offare in the “open”
position (where the handle is in line with the pipe, not at a right angle to it,)
and slide the CONTROL ARM around the valve’s handle.
5. Loosely tighten the hose clamps around the pipe on the opposite side of the
valve handle so it remains moveable.
6. Position the bolt of the Water Main Shut-Off directly above the bolt of the
SolidWorks Student Edition.
For Academic Use Only.
Control
Arm
Valve
Handle
Figure 5 - Sliding the CONTROL ARM around the valve handle
Inhaltsverzeichnis
