Elfa IDSF608 Bedienungsanleitung
Thank you for purchasing the induction cooktop, please read this instructions manual
carefully before using and keep it in a safe place for your future reference.
Instruction Manual for Induction Cooktop
MODEL: IDSF608
Working Principle
Product Introduction
2
The induction cooktop is mainly composed of an induced heating coil,
hotplate made of ferromagnetic materials and control system. In principle,
current generates a powerful magnetic field via the coil. Large numbers
of vortexes are produced in the way that the magnetic lines in the field
contact the bottom containing iron or stainless steel substances. The
tremendous energy generated by the vortexes can heat the food directly
by converting efficiency heat energy penetrating through the bottom.
The induction cooktop can meet various of cuisine demands by
electromagnetic heating, with micro-computerized control and multi-
functions, really the optimal choice for modern families.
The induction cooktop centers on customers and adopts personalized
design. Made of imported materials and through advanced process, the
unit has safe and reliable performances, making your life comfortable
and enabling you to fully enjoy the pleasures of life.
magnetic circuit
ceramic glass plate
iron pot
induction coil
Induced currents
3
We have designed this cooktop for private use in home.
With a view to constantly improving our products, we reserve the right to make
any changes to their technical, program or aesthetic features connected with
their technical evolution.
Over- Temperature Protection
A temperature sensor equipped can monitor the temperature inside the hotplate.
Whenanexcessivetemperatureismonitored,theinductionhotplatewillstopoperation
automatically.
Detection of Small Articles
When the pot is less than 80 mm in diameter or small articles (knife, fork, forceps,
key, etc.) exist or non-magnetic pots (such as aluminum pot) are found, the buzzer
can gives out an alarm lasting about 1 minute. In case the user has not put a proper
pot in time, the induction cooktop can enter the sate of standby automatically.
Heat Indication
When the cooktop is used for a long time, waste heat remains in the heating zone
in a few minutes. The code “H” appears, warning to be away from the heating zone.
Auto shutdown protection
Autoshuts downisa safety protectionfunction for yourinductioncooktop. Itshutdown
automatically if ever you forget to turn off your cooking. The default working times
for various power levels are shown in the below table: .
Power level The heating zone shut down
automatically after
1~3
4~6
7~9
8 hours
4 hours
2 hours
Safety
When the pot is removed, the induction cooktop can stop heating immediately and
shut down after the buzzer sounds for 1 minute.
*Warning:
Persons with a heart pacemaker should seek advice from their
2
3
4
medical practitioner before using this product.
Air intake
Air exit
Figure (2)
mini 5 cm mini 5 mm
mini 2 cm
Under any circumstances, make sure the induction hotplate is well
ventilated and the air inlet and outlet are not blocked.
Ensure the induction hotplate is in good work state. As shown in
Figure (2)
Note: The safety distance between the cooktop and the cupboard above the
hotplate should be at least 760mm.
4
Installation
Selection of installation equipment
Drill holes on the table surface according to the sizes shown in the
drawing. For the purpose of installation and use, a minimum of 50 mm
space shall be preserved around the hole.
Be sure the thickness of the table surface is at least 30mm. Please
select heat-resistant table material to avoid larger deformation caused
by the heat radiation from the hotplate.
As shown in Figure (1)
1
2Figure (1)
5 cm mini
5cm mini 5cm mini
56/75/90 cm
49
c
m
Cautions
4.
5.
1.
The induction cooktop shall not be mounted to cooling equipment, dishwashers
and rotary dryers.
The induction cooktop shall be installed such that better heat radiation
can be ensured to enhance its reliability.
The wall and induced heating zone above the table surface shall withstand
heat.
To avoid any damage, the sandwich layer and adhesive must be resistant
to heat.
2.
3.
5
Power line connection
The socket shall be connected according to the relevant standard
or connected to a single-pole cut-out. The method of connection
is shown in Figure (3):
4
3
Figure (3)
Voltage&frequency
400V 2-N
50\60HZ
220-240V
50\60HZ
220-240V 2+2-N
50\60HZ
1 2
L1 L2
Black Brown
21
L
Black&Brown
1 2
L1 L2 Gray Blue
N1 N2
3 4
43
34
Gray&BlueYellow/Green
5
5
5
Wire connection
N
N
Yellow/Green
Yellow/Green
Gray&Blue
Black Brown
Fix the hob on the table by screw four brackets on the bottom of hob
(see picture) after installation. Adjust the bracket position to suit for
different table top thickness.
screw
bracket
base
screw hole
The induction cooktop must be installed by a qualified, licensed electrician.
Please never conduct the operation by yourself.
Induction hotplate appearance
Control panel Air vent
Ceramic plate
Air entry
Schematic diagram of the control panel
If the cable is damaged or to be replaced, the operation must be
carried out the by after-sale agent with dedicated tools to avoid
any accidents.
If the appliance is being connected directly to the mains an omnipolar
circuit-breaker must be installed with a minimum opening of 3mm
between contacts.
The installer must ensure that the correct electrical connection has
been made and that it is compliant with safety regulations.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced by authorised
technicians only.
6
BOOST
Childproof lock key ON/OFF
Power/Timer
regulating key
Timer
Instructions for Use
Preparation before using:
After power on, the buzzer beep once, all the indicators
light up for 1 second then go out, indicating the induction
hotplate enters the state of standby.
Put the pot in the center of the heating zone.
Operation Instructions
After the “ON/OFF” key is pressed, all the indicators show
“-”. According to the heating zone where the pot is placed,
At the moment, press the "+" or "-" button, the indicator
displays 5, then adjust the power levels using the“+” or“-”
button. Press the "+" and "-" buttton simultaneously, the
hotplate immediately returns the power setting to 0 and
the corresponding cooking zone switches off.
See the attached table on PAGE 8 for the power specific
to each heating zone.
Note: After the “ON/OFF” key is pressed, the induction
hotplate will restore to its standby state if no any operation
is carried out within two minutes.
Boost function
To get a quicker heating speed, directly press “BOOST”
after selecting the heating zone, with the power level indicator
showing “P. ” This function can reach the heating power of
up to 2600W.
Note:
1. The boost function only operates for 5 minutes, after
which the cooking zone returns to its orginal setting.
2. The boost function only works on the all cooking zones.
3. As the boost function of 1st is activated ,the 2nd cooking
zone is limited under level 2 automatically.
7
As the boost function of 3rd is activated ,the 4th cooking
zone is limited under level 2 automatically.
4. The boost function can not work at the same tome on all
cooking zones.
Timing confirmation:
2. Once the timing indicator flashes for 5 seconds, the set time
will be confirmed to be valid automatically.
Timing cancellation:
Unlocking: under the locking state of the induction hotplate,
hold the “Interlock” key for 2 seconds, removing the locking state
automatically.
System function: to ensure the safety of children, the induction
hotplate is provided with the function of interlock.
Locking: Press the “Interlock” key, then the induction hotplate
enters the locking state, with the timing indicator showing “L0”
and the rest keys disabled.
Cancellation of “BOOST” function
Select the corresponding cooking zone and press the
"
Boost
"
key or "-" to cancel the Boost mode, then the cooking zone will
revert to its original setting.
8
Timing function
Press the "+"or"-" key of that zone, the corresponding indicator will be
flashing. To activate timer function by press the "+" or "-"of timer key,
the set time is between 1 and 99 minutes. Pressing the "+" of the timer
key once the time will increase by one minute. Keeping on the "+" of
timer key,the time will increase by 10 minutes,If the setting time
exceeds 99 minutes,it will automatically return to "0" minutes.
Same logic for "-".
1.Pressing the "+" or "-" of the timer key,the time can be set now.
If pressing the "-"and "+"keys simultaneously, the indicator
will display" 0".and the the timer will be cancel.
Iron plate
Selection of heating appliances
The above power may vary if the material or the size of pot is different.
The max. power of each heating zone are as follows:
Heating zone Max. power (W)
1
2
3
4
Boost
2000
1500
2000
1500
2600
Normal
Safety Reminding and Maintenance:
2000
2000
2600
Iron oil frying pan Stainless steel pot Iron pan Iron kettle
Enamel stainless
steel kettle Enamel cooking
utensil
9
You may have multiple appliances suitable for heating.
This induction hotplate is able to identify multiple heating appliances, and you
can test them according to one of the following methods:
Place the appliance in the heating zone. If the corresponding heating zone
displays a power level, it shows the suitability of the appliance; if “U” flashes, it
shows the appliance does not fit in the induction cooking.
Have a magnet to contact the appliance. If there is attraction between them, it
shows the appliance also fits in the induction cooking.
Requirement for pot material: the bottom contains materials of magnetic
conductivity.
Requirement for shape: flat bottom, more than 12 cm in diameter.
*
*
2
Never directly wash the
induction hotplate with water
so as to avoid dangers.
Indoor use only.
An isolator switch must be
installed
10
After being used for a long
time, the corresponding
heating zone of the induction
cooktop is till hot. Never touch
the ceramic surface to avoid
burning.
We suggest that you should
periodically check that there
are no object (glass, paper,
etc) that could obstruct the
inlet under your induction
cooktop
Keep electrical appliance out
of reach from children or
inform person. Do not let them
use the appliances without
supervision.
If the supply cord is damaged ,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
Clean the induction cooktop
on a regular basis to prevent
foreign matters from entering
the fan thus influencing the
normal operation.
Do not put any detergents or
flammable materials in the
equipment installed under the
induction cooktop.
For sealed food such as
canned goods, please do not
heat them before opening their
covers so as to avoid any
dangers of explosion due to
heating expansion.
Never have the induction
cooktop to work without food
inside, otherwise its
operational performance may
be affected and danger may
happen.
Do not place rough or uneven
appliances, which may
damage the ceramic surface.
If the surface is cracked, swith
off the appliance to avoid the
possibility of electric shock.
Metallic objects such as
knives, forks,spoons and lids
should not be placed on the
hotplate since they can get
hot.
Never use the induction
cooktop in high temperature
environments such as near a
gas stove or kerosene stove.
Inhaltsverzeichnis
Andere Elfa Kochfeld Handbücher
